Part Details for AT45DB011D-SH-T by Adesto Technologies Corporation
Results Overview of AT45DB011D-SH-T by Adesto Technologies Corporation
- Distributor Offerings: (4 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
AT45DB011D-SH-T Information
AT45DB011D-SH-T by Adesto Technologies Corporation is a Flash Memory.
Flash Memories are under the broader part category of Memory Components.
Memory components are essential in electronics for computer processing. They can be volatile or non-volatile, depending on the desired function. Read more about Memory Components on our Memory part category page.
Price & Stock for AT45DB011D-SH-T
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Bristol Electronics | 1502 |
|
RFQ | ||
|
|
Bristol Electronics | 204 |
|
RFQ | ||
|
|
Chip Stock | 3844 |
|
RFQ | ||
|
|
Vyrian | Memory ICs | 798 |
|
RFQ |
Part Details for AT45DB011D-SH-T
AT45DB011D-SH-T CAD Models
AT45DB011D-SH-T Part Data Attributes
|
|
AT45DB011D-SH-T
Adesto Technologies Corporation
Buy Now
Datasheet
|
Compare Parts:
AT45DB011D-SH-T
Adesto Technologies Corporation
Flash, 1MX1, PDSO8, 0.208 INCH, GREEN, PLASTIC, EIAJ, SOIC-8
|
| Rohs Code | Yes | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | ADESTO TECHNOLOGIES CORP | |
| Part Package Code | SOIC | |
| Package Description | 0.208 INCH, GREEN, PLASTIC, EIAJ, SOIC-8 | |
| Pin Count | 8 | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.32.00.51 | |
| Samacsys Manufacturer | Adesto Technologies | |
| Clock Frequency-Max (fCLK) | 66 MHz | |
| Data Retention Time-Min | 20 | |
| Endurance | 100000 Write/Erase Cycles | |
| JESD-30 Code | R-PDSO-G8 | |
| JESD-609 Code | e4 | |
| Length | 5.29 mm | |
| Memory Density | 1048576 bit | |
| Memory IC Type | FLASH | |
| Memory Width | 1 | |
| Moisture Sensitivity Level | 1 | |
| Number of Functions | 1 | |
| Number of Terminals | 8 | |
| Number of Words | 1048576 words | |
| Number of Words Code | 1000000 | |
| Operating Mode | SYNCHRONOUS | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| Organization | 1MX1 | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | SOP | |
| Package Equivalence Code | SOP8,.3 | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE | |
| Parallel/Serial | SERIAL | |
| Peak Reflow Temperature (Cel) | 260 | |
| Programming Voltage | 2.7 V | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 2.16 mm | |
| Serial Bus Type | SPI | |
| Standby Current-Max | 0.000025 A | |
| Supply Current-Max | 0.025 mA | |
| Supply Voltage-Max (Vsup) | 3.6 V | |
| Supply Voltage-Min (Vsup) | 2.7 V | |
| Supply Voltage-Nom (Vsup) | 3 V | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Temperature Grade | INDUSTRIAL | |
| Terminal Finish | NICKEL PALLADIUM GOLD | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 1.27 mm | |
| Terminal Position | DUAL | |
| Type | NOR TYPE | |
| Width | 5.24 mm | |
| Write Protection | HARDWARE/SOFTWARE |
Alternate Parts for AT45DB011D-SH-T
This table gives cross-reference parts and alternative options found for AT45DB011D-SH-T. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of AT45DB011D-SH-T, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| MX25L1021EMC-20G | Macronix International Co Ltd | Check for Price | Flash, 1MX1, PDSO8, 0.150 INCH, HALOGEN FREE AND ROHS COMPLIANT, MS-012, SOP-8 | AT45DB011D-SH-T vs MX25L1021EMC-20G |
| M25P10-VMW6T | Numonyx Memory Solutions | Check for Price | Flash, 128KX8, PDSO8, 0.200 INCH, PLASTIC, SO-8 | AT45DB011D-SH-T vs M25P10-VMW6T |
| AT45DB011B-SI | Atmel Corporation | Check for Price | Flash, 1MX1, PDSO8, 0.209 INCH, PLASTIC, EIAJ, SOIC-8 | AT45DB011D-SH-T vs AT45DB011B-SI |
| W25X10ALSNIG | Winbond Electronics Corp | Check for Price | Flash, 128KX8, PDSO8, 0.150 INCH, GREEN, PLASTIC, SOIC-8 | AT45DB011D-SH-T vs W25X10ALSNIG |
| EN25LF10-75GI | Elite Semiconductor Memory Technology Inc | Check for Price | Flash, 128KX8, PDSO8, 0.150 INCH, SOP-8 | AT45DB011D-SH-T vs EN25LF10-75GI |
| M25P10-AVMN6T/Y | Numonyx Memory Solutions | Check for Price | Flash, 128KX8, PDSO8, 0.150 INCH, PLASTIC, SOP-8 | AT45DB011D-SH-T vs M25P10-AVMN6T/Y |
| M45PE10S-VMN6P | Micron Technology Inc | Check for Price | Flash, 128KX8, PDSO8, 0.150 INCH, HALOGEN FREE AND ROHS COMPLIANT, PLASTIC, SOP-8 | AT45DB011D-SH-T vs M45PE10S-VMN6P |
| M45PE10S-VMN6TP | Micron Technology Inc | Check for Price | Flash, 128KX8, PDSO8, 0.150 INCH, HALOGEN FREE AND ROHS COMPLIANT, PLASTIC, SOP-8 | AT45DB011D-SH-T vs M45PE10S-VMN6TP |
| AT45DB011D-SSH-B | Adesto Technologies Corporation | Check for Price | Flash, 1MX1, PDSO8, 0.150 INCH, GREEN, PLASTIC, MS-012AA, SOIC-8 | AT45DB011D-SH-T vs AT45DB011D-SSH-B |
| W25X10LSNI | Winbond Electronics Corp | Check for Price | Flash, 1MX1, PDSO8, 0.150 INCH, PLASTIC, SOIC-8 | AT45DB011D-SH-T vs W25X10LSNI |
AT45DB011D-SH-T Frequently Asked Questions (FAQ)
-
The recommended operating voltage range for the AT45DB011D-SH-T is 2.7V to 3.6V.
-
The HOLD pin should be pulled high during power-up and power-down sequences to prevent unwanted writes to the device.
-
The AT45DB011D-SH-T supports up to 100,000 erase cycles.
-
Wear leveling can be implemented by distributing write cycles across the entire memory space, using techniques such as dynamic wear leveling or static wear leveling.
-
The WP pin is used to prevent writes to the status register and the memory array. When WP is low, the device is in a protected state and writes are inhibited.