Part Details for AT25SF041-SSHD-T by Dialog Semiconductor GmbH
Results Overview of AT25SF041-SSHD-T by Dialog Semiconductor GmbH
- Distributor Offerings: (2 listings)
- Number of FFF Equivalents: (1 replacement)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (2 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
AT25SF041-SSHD-T Information
AT25SF041-SSHD-T by Dialog Semiconductor GmbH is a Flash Memory.
Flash Memories are under the broader part category of Memory Components.
Memory components are essential in electronics for computer processing. They can be volatile or non-volatile, depending on the desired function. Read more about Memory Components on our Memory part category page.
Price & Stock for AT25SF041-SSHD-T
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
67AC3378
|
Newark | Flash Memory, 4Mbit, -40 To 85Deg C, Flash Memory Type:Serial Nor, Memory Configuration:-, Interfaces:Spi, Ic Case/Package:Wsoic, No. Of Pins:8Pins, Clock Frequency Max:85Mhz, Access Time:-, Supply Voltage Min:2.5V, Msl:- Rohs Compliant: Yes |Dialog Semiconductor AT25SF041-SSHD-T RoHS: Compliant Min Qty: 8000 Package Multiple: 1 Date Code: 0 Container: Cut Tape | 0 |
|
Buy Now | |
|
|
Flip Electronics | Stock, ship today | 660900 |
|
RFQ |
Part Details for AT25SF041-SSHD-T
AT25SF041-SSHD-T CAD Models
AT25SF041-SSHD-T Part Data Attributes
|
|
AT25SF041-SSHD-T
Dialog Semiconductor GmbH
Buy Now
Datasheet
|
Compare Parts:
AT25SF041-SSHD-T
Dialog Semiconductor GmbH
Flash, 512KX8, PDSO8,
|
| Rohs Code | Yes | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | DIALOG SEMICONDUCTOR GMBH | |
| Package Description | SOP-8 | |
| Reach Compliance Code | unknown | |
| Clock Frequency-Max (fCLK) | 104 MHz | |
| Data Retention Time-Min | 20 | |
| Endurance | 100000 Write/Erase Cycles | |
| JESD-30 Code | R-PDSO-G8 | |
| Length | 4.925 mm | |
| Memory Density | 4194304 bit | |
| Memory IC Type | FLASH | |
| Memory Width | 8 | |
| Number of Functions | 1 | |
| Number of Terminals | 8 | |
| Number of Words | 524288 words | |
| Number of Words Code | 512000 | |
| Operating Mode | SYNCHRONOUS | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| Organization | 512KX8 | |
| Output Characteristics | 3-STATE | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | SOP | |
| Package Equivalence Code | SOP8,.25 | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE | |
| Parallel/Serial | SERIAL | |
| Programming Voltage | 3 V | |
| Seated Height-Max | 1.75 mm | |
| Serial Bus Type | QSPI | |
| Standby Current-Max | 0.000025 A | |
| Supply Current-Max | 0.016 mA | |
| Supply Voltage-Max (Vsup) | 3.6 V | |
| Supply Voltage-Min (Vsup) | 2.5 V | |
| Supply Voltage-Nom (Vsup) | 3 V | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Temperature Grade | INDUSTRIAL | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 1.27 mm | |
| Terminal Position | DUAL | |
| Type | NOR TYPE | |
| Width | 3.9 mm | |
| Write Protection | HARDWARE/SOFTWARE |
Alternate Parts for AT25SF041-SSHD-T
This table gives cross-reference parts and alternative options found for AT25SF041-SSHD-T. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of AT25SF041-SSHD-T, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| AT25SF041-SSHD-B | Renesas Electronics Corporation | Check for Price | 4Mbit, 2.5V to 3.6V Range SPI Serial Flash Memory with Dual-I/O and Quad-I/O Support, SOIC-N, 98/Tube | AT25SF041-SSHD-T vs AT25SF041-SSHD-B |
AT25SF041-SSHD-T Frequently Asked Questions (FAQ)
-
The AT25SF041-SSHD-T has a minimum of 100,000 write cycles, but the actual number of write cycles may vary depending on the usage and operating conditions.
-
The AT25SF041-SSHD-T has a built-in power-on reset circuit that ensures the device is in a known state after power-up. The device will reset its internal state and output high-impedance (Hi-Z) on the I/O pins during power-up.
-
The WP pin is used to enable or disable write protection for the entire memory array. When the WP pin is tied low, the entire memory array is write-protected, and when it is tied high, the memory array is writable.
-
Yes, the AT25SF041-SSHD-T can be used in a multi-master SPI bus system. The device has a built-in slave select (SS) pin that allows it to be selected or deselected by the master device.
-
The maximum clock frequency for the AT25SF041-SSHD-T is 20 MHz.