Part Details for AT25128AN-10SU-1.8 by Atmel Corporation
Results Overview of AT25128AN-10SU-1.8 by Atmel Corporation
- Distributor Offerings: (0 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (0 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Industrial Automation
Renewable Energy
Automotive
Robotics and Drones
AT25128AN-10SU-1.8 Information
AT25128AN-10SU-1.8 by Atmel Corporation is an EEPROM.
EEPROMs are under the broader part category of Memory Components.
Memory components are essential in electronics for computer processing. They can be volatile or non-volatile, depending on the desired function. Read more about Memory Components on our Memory part category page.
Part Details for AT25128AN-10SU-1.8
AT25128AN-10SU-1.8 CAD Models
AT25128AN-10SU-1.8 Part Data Attributes
|
|
AT25128AN-10SU-1.8
Atmel Corporation
Buy Now
Datasheet
|
Compare Parts:
AT25128AN-10SU-1.8
Atmel Corporation
EEPROM, 16KX8, Serial, CMOS, PDSO8, 0.150 INCH, GREEN, PLASTIC, MS-012AA, SOIC-8
|
| Rohs Code | Yes | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | ATMEL CORP | |
| Part Package Code | SOIC | |
| Package Description | 0.150 INCH, GREEN, PLASTIC, MS-012AA, SOIC-8 | |
| Pin Count | 8 | |
| Reach Compliance Code | unknown | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.32.00.51 | |
| Clock Frequency-Max (fCLK) | 5 MHz | |
| Data Retention Time-Min | 100 | |
| Endurance | 100000 Write/Erase Cycles | |
| JESD-30 Code | R-PDSO-G8 | |
| JESD-609 Code | e3 | |
| Length | 4.9 mm | |
| Memory Density | 131072 bit | |
| Memory IC Type | EEPROM | |
| Memory Width | 8 | |
| Moisture Sensitivity Level | 1 | |
| Number of Functions | 1 | |
| Number of Terminals | 8 | |
| Number of Words | 16384 words | |
| Number of Words Code | 16000 | |
| Operating Mode | SYNCHRONOUS | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| Organization | 16KX8 | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | SOP | |
| Package Equivalence Code | SOP8,.25 | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE | |
| Parallel/Serial | SERIAL | |
| Peak Reflow Temperature (Cel) | 260 | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 1.75 mm | |
| Serial Bus Type | SPI | |
| Standby Current-Max | 0.000003 A | |
| Supply Current-Max | 0.01 mA | |
| Supply Voltage-Max (Vsup) | 5.5 V | |
| Supply Voltage-Min (Vsup) | 1.8 V | |
| Supply Voltage-Nom (Vsup) | 2.7 V | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Temperature Grade | INDUSTRIAL | |
| Terminal Finish | MATTE TIN | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 1.27 mm | |
| Terminal Position | DUAL | |
| Width | 3.9 mm | |
| Write Cycle Time-Max (tWC) | 5 ms | |
| Write Protection | HARDWARE/SOFTWARE |
AT25128AN-10SU-1.8 Frequently Asked Questions (FAQ)
-
The AT25128AN-10SU-1.8 can operate from -40°C to +85°C, making it suitable for industrial and automotive applications.
-
To ensure data integrity, it's recommended to use a voltage supervisor or a power-on reset circuit to ensure that the device is fully powered up before accessing the memory. Additionally, use a capacitor to filter out any noise on the power supply lines.
-
No, the AT25128AN-10SU-1.8 is a 1.8V device and should not be used in a 5V system. Applying 5V to the device can cause permanent damage.
-
The AT25128AN-10SU-1.8 has a write endurance of 100,000 cycles per page, with a total of 4,096 pages. This means that the device can withstand a total of 409,600,000 write cycles.
-
Page erase and write operations should be performed using the device's specific commands and protocols. Refer to the datasheet for detailed information on the command sequences and timing requirements.