Part Details for ADV7510BSTZ-225 by Analog Devices Inc
Results Overview of ADV7510BSTZ-225 by Analog Devices Inc
- Distributor Offerings: (1 listing)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (0 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Price & Stock for ADV7510BSTZ-225
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Vyrian | Peripheral ICs | 1334 |
|
RFQ |
Part Details for ADV7510BSTZ-225
ADV7510BSTZ-225 CAD Models
ADV7510BSTZ-225 Part Data Attributes
|
|
ADV7510BSTZ-225
Analog Devices Inc
Buy Now
Datasheet
|
Compare Parts:
ADV7510BSTZ-225
Analog Devices Inc
SPECIALTY CONSUMER CIRCUIT
|
| Pbfree Code | No | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | ANALOG DEVICES INC | |
| Package Description | ROHS COMPLIANT, MS-026BED, LQFP-100 | |
| Reach Compliance Code | unknown | |
| HTS Code | 8542.39.00.01 | |
| Consumer IC Type | CONSUMER CIRCUIT | |
| JESD-30 Code | S-PQFP-G100 | |
| JESD-609 Code | e3 | |
| Length | 14 mm | |
| Moisture Sensitivity Level | 3 | |
| Number of Functions | 1 | |
| Number of Terminals | 100 | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -25 °C | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | LFQFP | |
| Package Shape | SQUARE | |
| Package Style | FLATPACK, LOW PROFILE, FINE PITCH | |
| Peak Reflow Temperature (Cel) | 260 | |
| Seated Height-Max | 1.6 mm | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Temperature Grade | OTHER | |
| Terminal Finish | MATTE TIN | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 0.5 mm | |
| Terminal Position | QUAD | |
| Width | 14 mm |
ADV7510BSTZ-225 Frequently Asked Questions (FAQ)
-
A 4-layer PCB with a solid ground plane and a separate power plane is recommended. Keep the HDMI traces as short as possible and away from noise sources. Use a common mode filter and a shielded cable to reduce EMI.
-
Use the I2C interface to configure the device. Set the HDMI mode (e.g., 1080p, 4K) and refresh rate (e.g., 60Hz, 120Hz) using the appropriate registers. Refer to the datasheet for register addresses and values.
-
The ADV7510BSTZ-225 supports cable lengths up to 30 meters at 1080p and 10 meters at 4K resolution. However, the actual cable length may vary depending on the cable quality and the system's signal integrity.
-
Use an HDMI analyzer or a logic analyzer to capture and analyze the HDMI signal. Check for errors in the EDID, HDCP, and audio packets. Verify that the device is configured correctly and that the HDMI cable is of good quality.
-
Yes, the ADV7510BSTZ-225 can be used with an FPGA or ASIC. However, you may need to implement additional logic to handle the HDMI protocol and configure the device using the I2C interface.