Part Details for ADT75ARM-REEL by Analog Devices Inc
Results Overview of ADT75ARM-REEL by Analog Devices Inc
- Distributor Offerings: (2 listings)
- Number of FFF Equivalents: (1 replacement)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (6 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
ADT75ARM-REEL Information
ADT75ARM-REEL by Analog Devices Inc is a Temperature Sensor.
Temperature Sensors are under the broader part category of Sensors/Transducers.
Sensors and transducers detect and measure physical quantities like temperature, pressure, and force, converting them into electrical signals for various applications. Read more about Sensors/Transducers on our Sensors/Transducers part category page.
Available Datasheets
| Part # | Manufacturer | Description | Datasheet |
|---|---|---|---|
| LMX2325TMX-G | Rochester Electronics LLC | LMX2325 - RoHS - T/R, PLL Freq Synthesizer | |
| HSCHD02CR2001R | Amphenol Communications Solutions | HSC Right Angle plug,Tape and Reel,Brown housing | |
| HSCHD02BR1001R | Amphenol Communications Solutions | HSC Right Angle plug,Tape and Reel,Blue housing |
Price & Stock for ADT75ARM-REEL
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
2156-ADT75ARM-REEL-ND
|
DigiKey | 12-BIT DIGITAL TEMP. SENSOR Min Qty: 214 Lead time: 1 Weeks Container: Bulk MARKETPLACE PRODUCT |
77836 In Stock |
|
$1.4000 | Buy Now |
|
|
Rochester Electronics | 1 Degree Centigrade Accurate, 12-Bit Digital Temperature Sensor RoHS: Not Compliant Status: Obsolete Min Qty: 1 | 77836 |
|
$0.8355 / $1.3500 | Buy Now |
Part Details for ADT75ARM-REEL
ADT75ARM-REEL CAD Models
ADT75ARM-REEL Part Data Attributes
|
|
ADT75ARM-REEL
Analog Devices Inc
Buy Now
Datasheet
|
Compare Parts:
ADT75ARM-REEL
Analog Devices Inc
Switch/Digital Output Temperature Sensor, DIGITAL TEMP SENSOR-SERIAL, 12BIT(s), 3Cel, SQUARE, SURFACE MOUNT, MO-187AA, MSOP-8
|
| Rohs Code | No | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | ANALOG DEVICES INC | |
| Package Description | MO-187AA, MSOP-8 | |
| Reach Compliance Code | unknown | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 | |
| Accuracy-Max (Cel) | 3 Cel | |
| Additional Feature | ACCURACY FOR A GRADE | |
| Body Breadth | 3 mm | |
| Body Height | 0.85 mm | |
| Body Length or Diameter | 3 mm | |
| Housing | PLASTIC | |
| JESD-609 Code | e0 | |
| Mounting Feature | SURFACE MOUNT | |
| Number of Bits | 12 | |
| Number of Terminals | 8 | |
| Operating Current-Max | 0.001 mA | |
| Operating Temperature-Max | 125 °C | |
| Operating Temperature-Min | -55 °C | |
| Output Interface Type | I2C INTERFACE | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Equivalence Code | TSSOP8,.19 | |
| Package Shape/Style | SQUARE | |
| Sensors/Transducers Type | TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL | |
| Supply Voltage-Max | 5.5 V | |
| Supply Voltage-Min | 3 V | |
| Surface Mount | YES | |
| Terminal Finish | Tin/Lead (Sn/Pb) | |
| Termination Type | SOLDER |
Alternate Parts for ADT75ARM-REEL
This table gives cross-reference parts and alternative options found for ADT75ARM-REEL. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of ADT75ARM-REEL, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| ADT75AR-U1 | Analog Devices Inc | Check for Price | ADT75AR-U1 | ADT75ARM-REEL vs ADT75AR-U1 |
ADT75ARM-REEL Frequently Asked Questions (FAQ)
-
A good PCB layout for optimal thermal performance involves placing the ADT75ARM-REEL near a thermal pad or a heat sink, and ensuring good thermal conductivity between the device and the PCB. A 4-layer PCB with a solid ground plane and a thermal relief pattern around the device can help to dissipate heat efficiently.
-
The ADT75ARM-REEL does not require calibration for accurate temperature measurements. It has an internal calibration that is performed during the manufacturing process, and it provides accurate temperature readings over the entire operating range. However, if you need to perform a system-level calibration, you can use the device's built-in calibration registers to adjust the temperature readings.
-
The maximum cable length for the I2C interface of the ADT75ARM-REEL depends on the capacitance of the cable and the operating frequency. As a general rule, the cable length should be kept as short as possible to minimize signal degradation. However, a cable length of up to 10 meters is typically acceptable for I2C frequencies up to 400 kHz.
-
Yes, the ADT75ARM-REEL is designed to operate in high-vibration environments. It has a robust package design and is qualified for use in industrial and automotive applications. However, it's essential to ensure that the device is properly mounted and secured to the PCB to prevent mechanical stress and damage.
-
The thermal shutdown feature of the ADT75ARM-REEL is designed to protect the device from overheating. When the device temperature exceeds the thermal shutdown threshold, it will shut down and enter a low-power state. To handle this feature, you should implement a thermal monitoring and control system that can detect the thermal shutdown event and take corrective action to reduce the device temperature.