Part Details for ADPA1122AEHZ by Analog Devices Inc
Results Overview of ADPA1122AEHZ by Analog Devices Inc
- Distributor Offerings: (6 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (0 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
ADPA1122AEHZ Information
ADPA1122AEHZ by Analog Devices Inc is an RF/Microwave Amplifier.
RF/Microwave Amplifiers are under the broader part category of RF and Microwave Components.
RF and Microwave Engineering focuses on the design and operation of devices that transmit or receive radio waves. The main distinction between RF and microwave engineering is their wavelength, which influences how energy is transmitted and used in various applications. Read more about RF and Microwave Components on our RF and Microwave part category page.
Price & Stock for ADPA1122AEHZ
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
77AK2299
|
Newark | Rf Amplifier, 11.8Ghz, Lcc-Ep-18 Rohs Compliant: Yes |Analog Devices ADPA1122AEHZ RoHS: Compliant Min Qty: 1 Package Multiple: 1 Date Code: 1 Container: Cut Tape | 0 |
|
$487.7200 | Buy Now |
|
DISTI #
505-ADPA1122AEHZ-ND
|
DigiKey | 8-12 GHZ,20W,GAN RADAR PA Min Qty: 1 Lead time: 13 Weeks Container: Strip |
5 In Stock |
|
$428.1100 | Buy Now |
|
DISTI #
584-ADPA1122AEHZ
|
Mouser Electronics | RF Amplifier 8-12 GHz,20W,GaN Radar PA RoHS: Compliant | 5 |
|
$446.8100 | Buy Now |
|
DISTI #
V99:2348_25482253
|
Arrow Electronics | RF Amp Single Power Amp 11.5GHz 18-Pin CLLCC EP Cut Tape RoHS: Compliant Min Qty: 1 Package Multiple: 1 Lead time: 13 Weeks Date Code: 2217 | Americas - 3 |
|
$415.2700 | Buy Now |
|
|
Analog Devices Inc | 8-12 GHz,20W,GaN Radar PA Package Multiple: 1 | 5 |
|
$342.4900 / $428.1100 | Buy Now |
|
DISTI #
67608620
|
Verical | RF Amp Single Power Amp 11.5GHz 18-Pin CLLCC EP Cut Tape RoHS: Compliant Min Qty: 1 Package Multiple: 1 Date Code: 2217 | Americas - 3 |
|
$415.2700 | Buy Now |
Part Details for ADPA1122AEHZ
ADPA1122AEHZ CAD Models
ADPA1122AEHZ Part Data Attributes
|
|
ADPA1122AEHZ
Analog Devices Inc
Buy Now
Datasheet
|
Compare Parts:
ADPA1122AEHZ
Analog Devices Inc
ADPA1122AEHZ
|
| Pbfree Code | No | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | ANALOG DEVICES INC | |
| Pin Count | 18 | |
| Reach Compliance Code | unknown | |
| Samacsys Manufacturer | Analog Devices | |
| RF/Microwave Device Type | WIDE BAND HIGH POWER |
ADPA1122AEHZ Frequently Asked Questions (FAQ)
-
A good PCB layout is crucial for the ADP1122AEHZ. Ensure a solid ground plane, keep the input and output traces short and separate, and use a common-mode choke to reduce EMI. Refer to the ADP1122AEHZ evaluation board layout as a reference.
-
Choose X7R or X5R ceramic capacitors with a voltage rating of at least 2x the input voltage. For the input capacitor, a value between 1uF to 10uF is recommended. For the output capacitor, a value between 10uF to 22uF is recommended. Ensure the capacitors are placed close to the ADP1122AEHZ pins.
-
The absolute maximum input voltage rating is 42V. However, for reliable operation, it's recommended to keep the input voltage below 36V to ensure the internal voltage regulator can operate within its specified range.
-
The ADP1122AEHZ is rated for operation up to 125°C. However, the device's performance and reliability may degrade at high temperatures. Ensure proper thermal management and consider derating the output current and voltage according to the temperature derating curves in the datasheet.
-
To ensure proper power-up and power-down sequencing, connect the enable pin (EN) to a logic signal that goes high after the input voltage has reached its nominal value. During power-down, ensure the input voltage is removed before the enable pin is pulled low.