Part Details for ADP122ACPZ-2.5-R7 by Analog Devices Inc
Results Overview of ADP122ACPZ-2.5-R7 by Analog Devices Inc
- Distributor Offerings: (2 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (2 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Industrial Automation
Renewable Energy
Robotics and Drones
ADP122ACPZ-2.5-R7 Information
ADP122ACPZ-2.5-R7 by Analog Devices Inc is a Linear Regulator IC.
Linear Regulator ICs are under the broader part category of Power Circuits.
A power circuit delivers electricity in order to operate a load for an electronic device. Power circuits include transformers, generators and switches. Read more about Power Circuits on our Power Circuits part category page.
Price & Stock for ADP122ACPZ-2.5-R7
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Rochester Electronics | 5.5V Input, 300mA, Low Quiescent Current, CMOS Linear Regulator RoHS: Compliant Status: Obsolete Min Qty: 1 | 14691 |
|
$0.3686 / $0.5945 | Buy Now |
|
|
Vyrian | Regulators | 14204 |
|
RFQ |
Part Details for ADP122ACPZ-2.5-R7
ADP122ACPZ-2.5-R7 CAD Models
ADP122ACPZ-2.5-R7 Part Data Attributes
|
|
ADP122ACPZ-2.5-R7
Analog Devices Inc
Buy Now
Datasheet
|
Compare Parts:
ADP122ACPZ-2.5-R7
Analog Devices Inc
5.5 V Input, 300 mA, Low Quiescent Current, CMOS Linear Regulator, Fixed Output Voltage
|
| Pbfree Code | No | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | ANALOG DEVICES INC | |
| Part Package Code | SOIC | |
| Package Description | 2 X 2 MM, ROHS COMPLIANT, LFCSP-6 | |
| Pin Count | 6 | |
| Manufacturer Package Code | CP-6-3 | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 | |
| Samacsys Manufacturer | Analog Devices | |
| Dropout Voltage1-Max | 0.15 V | |
| Input Voltage-Max | 5.5 V | |
| Input Voltage-Min | 2.3 V | |
| JESD-30 Code | S-PDSO-N6 | |
| JESD-609 Code | e4 | |
| Length | 2 mm | |
| Moisture Sensitivity Level | 1 | |
| Number of Functions | 1 | |
| Number of Terminals | 6 | |
| Operating Temperature TJ-Max | 125 °C | |
| Operating Temperature TJ-Min | -40 °C | |
| Output Current1-Max | 0.3 A | |
| Output Voltage1-Max | 2.55 V | |
| Output Voltage1-Min | 2.45 V | |
| Output Voltage1-Nom | 2.5 V | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | HVSON | |
| Package Equivalence Code | SOLCC6,.08,25 | |
| Package Shape | SQUARE | |
| Package Style | SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE | |
| Regulator Type | FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR | |
| Seated Height-Max | 0.65 mm | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Terminal Finish | NICKEL PALLADIUM GOLD | |
| Terminal Form | NO LEAD | |
| Terminal Pitch | 0.65 mm | |
| Terminal Position | DUAL | |
| Voltage Tolerance-Max | 2% | |
| Width | 2 mm |
Alternate Parts for ADP122ACPZ-2.5-R7
This table gives cross-reference parts and alternative options found for ADP122ACPZ-2.5-R7. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of ADP122ACPZ-2.5-R7, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| LD6836CX4/C23P | NXP Semiconductors | Check for Price | IC VREG 2.3 V FIXED POSITIVE LDO REGULATOR, 0.16 V DROPOUT, PBGA4, 0.76 X 0.76 MM, 0.47 MM HEIGHT, 0.40 MM PITCH, GREEN, WLCSP-4, Fixed Positive Single Output LDO Regulator | ADP122ACPZ-2.5-R7 vs LD6836CX4/C23P |
| LD6836CX4/23H | NXP Semiconductors | Check for Price | IC VREG 2.3 V FIXED POSITIVE LDO REGULATOR, 0.16 V DROPOUT, PBGA4, 0.76 X 0.76 MM, 0.47 MM HEIGHT, 0.40 MM PITCH, GREEN, WLCSP-4, Fixed Positive Single Output LDO Regulator | ADP122ACPZ-2.5-R7 vs LD6836CX4/23H |
ADP122ACPZ-2.5-R7 Frequently Asked Questions (FAQ)
-
Analog Devices recommends a 2-layer or 4-layer PCB with a solid ground plane and a thermal relief pattern on the bottom layer to improve heat dissipation. Additionally, keeping the output capacitors close to the device and using a low-ESR capacitor can help reduce noise and improve stability.
-
To ensure stability, make sure to follow the recommended output capacitor values and ESR ranges, and keep the output capacitors close to the device. Additionally, adding a small ceramic capacitor (e.g., 10nF) between the VIN pin and GND can help improve stability. Also, ensure that the input voltage is well-regulated and the device is operated within its recommended operating conditions.
-
Although the datasheet specifies a maximum input voltage of 5.5V, the device can handle input voltages up to 6V for short durations (e.g., during power-up or voltage transients). However, it's recommended to operate the device within the specified maximum rating to ensure long-term reliability and performance.
-
The ADP122ACPZ-2.5-R7 is rated for operation up to 125°C, but its performance and reliability may degrade at higher temperatures. If your application requires operation above 125°C, consider using a different device or implementing additional thermal management measures, such as heat sinks or cooling systems.
-
To calculate power dissipation, use the formula: Pd = (VIN - VOUT) x IOUT + (VIN x IQ), where IQ is the quiescent current. Make sure to consider the device's efficiency, output current, and input voltage when calculating power dissipation. You can also use Analog Devices' power dissipation calculator tool to simplify the calculation.