Part Details for ADP121-ACBZ15R7 by Analog Devices Inc
Results Overview of ADP121-ACBZ15R7 by Analog Devices Inc
- Distributor Offerings: (4 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Energy and Power Systems
Transportation and Logistics
Renewable Energy
Automotive
ADP121-ACBZ15R7 Information
ADP121-ACBZ15R7 by Analog Devices Inc is a Linear Regulator IC.
Linear Regulator ICs are under the broader part category of Power Circuits.
A power circuit delivers electricity in order to operate a load for an electronic device. Power circuits include transformers, generators and switches. Read more about Power Circuits on our Power Circuits part category page.
Price & Stock for ADP121-ACBZ15R7
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
505-ADP121-ACBZ15R7CT-ND
|
DigiKey | IC REG LINEAR 1.5V 150MA 4-WLCSP Min Qty: 1 Lead time: 10 Weeks Container: Digi-Reel®, Cut Tape (CT), Tape & Reel (TR) |
2960 In Stock |
|
$0.5000 / $2.0300 | Buy Now |
|
DISTI #
584-ADP121-ACBZ15R7
|
Mouser Electronics | Linear Voltage Regulators 150mA Low IQ Low Dropout Reg 1.5v RoHS: Compliant | 0 |
|
$0.5190 / $1.1700 | Order Now |
|
|
Analog Devices Inc | 150mA Low IQ Low Dropout Reg 1 Min Qty: 1 Package Multiple: 3000 | 63592 |
|
$0.5000 / $2.0300 | Buy Now |
|
DISTI #
26635034
|
Verical | LDO Regulator Pos 1.5V 0.15A 4-Pin WLCSP T/R RoHS: Compliant Min Qty: 3000 Package Multiple: 3000 | Americas - 63000 |
|
$0.5031 | Buy Now |
Part Details for ADP121-ACBZ15R7
ADP121-ACBZ15R7 CAD Models
ADP121-ACBZ15R7 Part Data Attributes
|
|
ADP121-ACBZ15R7
Analog Devices Inc
Buy Now
Datasheet
|
Compare Parts:
ADP121-ACBZ15R7
Analog Devices Inc
150 mA, Low Quiescent Current, CMOS Linear Regulator in 5-Lead TSOT or 4-Ball WLCSP
|
| Pbfree Code | No | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | ANALOG DEVICES INC | |
| Part Package Code | BGA | |
| Package Description | 0.40 MM PITCH, HALOGEN FREE AND ROHS COMPLIANT, WLCSP-4 | |
| Pin Count | 4 | |
| Manufacturer Package Code | CB-4-2 | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 | |
| Samacsys Manufacturer | Analog Devices | |
| Adjustability | FIXED | |
| Dropout Voltage1-Max | 0.135 V | |
| Dropout Voltage1-Nom | 0.09 V | |
| Input Voltage Absolute-Max | 6 V | |
| Input Voltage-Max | 5.5 V | |
| Input Voltage-Min | 2.3 V | |
| JESD-30 Code | S-PBGA-B4 | |
| JESD-609 Code | e1 | |
| Length | 0.82 mm | |
| Line Regulation-Max | 0.0016% | |
| Load Regulation-Max | 0.0112% | |
| Moisture Sensitivity Level | 1 | |
| Number of Functions | 1 | |
| Number of Outputs | 1 | |
| Number of Terminals | 4 | |
| Operating Temperature TJ-Max | 125 °C | |
| Operating Temperature TJ-Min | -40 °C | |
| Output Current1-Max | 0.15 A | |
| Output Voltage1-Max | 1.545 V | |
| Output Voltage1-Min | 1.455 V | |
| Output Voltage1-Nom | 1.5 V | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | VFBGA | |
| Package Equivalence Code | BGA4,2X2,16 | |
| Package Shape | SQUARE | |
| Package Style | GRID ARRAY, VERY THIN PROFILE, FINE PITCH | |
| Packing Method | TR | |
| Peak Reflow Temperature (Cel) | 260 | |
| Qualification Status | Not Qualified | |
| Regulator Type | FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR | |
| Seated Height-Max | 0.66 mm | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) | |
| Terminal Form | BALL | |
| Terminal Pitch | 0.4 mm | |
| Terminal Position | BOTTOM | |
| Time@Peak Reflow Temperature-Max (s) | 30 | |
| Voltage Tolerance-Max | 3% | |
| Width | 0.82 mm |
Alternate Parts for ADP121-ACBZ15R7
This table gives cross-reference parts and alternative options found for ADP121-ACBZ15R7. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of ADP121-ACBZ15R7, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| LD39115J18R | STMicroelectronics | $0.4909 | 150 mA low quiescent current low noise voltage regulator | ADP121-ACBZ15R7 vs LD39115J18R |
| LD39115J15R | STMicroelectronics | $0.5336 | 150 mA low quiescent current low noise voltage regulator | ADP121-ACBZ15R7 vs LD39115J15R |
| ADP121-ACBZ18R7 | Analog Devices Inc | Check for Price | 150 mA, Low Quiescent Current, CMOS Linear Regulator in 5-Lead TSOT or 4-Ball WLCSP | ADP121-ACBZ15R7 vs ADP121-ACBZ18R7 |
| LD39015J18R | STMicroelectronics | Check for Price | 150 mA low quiescent current low noise voltage regulator | ADP121-ACBZ15R7 vs LD39015J18R |
| ISL9021AIICZ-T | Intersil Corporation | Check for Price | 250mA Single LDO with Low IQ, Low Noise and High PSRR LDO; uTDFN6, WLCSP4; Temp Range: -40° to 85°C | ADP121-ACBZ15R7 vs ISL9021AIICZ-T |
| ISL9021AIICZ-T | Renesas Electronics Corporation | Check for Price | 250mA Single LDO with Low IQ, Low Noise and High PSRR LDO, WLCSP-BP, /Reel | ADP121-ACBZ15R7 vs ISL9021AIICZ-T |
| LD39015J15R | STMicroelectronics | Check for Price | 150 mA low quiescent current low noise voltage regulator | ADP121-ACBZ15R7 vs LD39015J15R |
| TPS72715YFFT | Texas Instruments | Check for Price | 250-mA, ultra-low-IQ, low-dropout voltage regulator with enable 4-DSBGA -40 to 125 | ADP121-ACBZ15R7 vs TPS72715YFFT |
| FAN2564UC15X | onsemi | Check for Price | 300mA Low-VIN LDO for Digital Applications, WL-CSP 4L, 3000-TAPE REEL | ADP121-ACBZ15R7 vs FAN2564UC15X |
| ISL9021AIIBZ-T | Renesas Electronics Corporation | Check for Price | 250mA Single LDO with Low IQ, Low Noise and High PSRR LDO, WLCSP-BP, /Reel | ADP121-ACBZ15R7 vs ISL9021AIIBZ-T |
ADP121-ACBZ15R7 Frequently Asked Questions (FAQ)
-
The recommended PCB layout for optimal thermal performance involves placing the device on a 2-layer or 4-layer board with a solid ground plane on the bottom layer, and using thermal vias to connect the exposed pad to the ground plane. Additionally, keeping the PCB traces and components away from the device's thermal pad can help reduce thermal resistance.
-
To ensure accurate current sensing with the ADP121, it's essential to follow proper layout and routing guidelines, such as keeping the sense lines short and away from noise sources, using a Kelvin connection to the sense resistor, and minimizing the resistance of the sense lines. Additionally, calibrating the device and using a high-precision sense resistor can also improve accuracy.
-
The maximum allowed voltage on the EN pin is 6V, which is the absolute maximum rating. However, it's recommended to keep the voltage on the EN pin within the logic high range (2.5V to 5.5V) to ensure proper operation.
-
The ADP121 is rated for operation up to 125°C, but it's essential to consider the device's power dissipation and thermal resistance when operating in high-temperature environments. Proper heat sinking and thermal management are crucial to ensure reliable operation.
-
To handle the output voltage noise and ripple, it's recommended to use a suitable output capacitor with low ESR and a high-frequency filter, such as an RC filter or an LC filter, to reduce the noise and ripple. Additionally, using a shielded cable and keeping the output traces away from noise sources can also help minimize noise and ripple.