Part Details for ADM485AN by Analog Devices Inc
Results Overview of ADM485AN by Analog Devices Inc
- Distributor Offerings: (5 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (7 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Industrial Automation
Renewable Energy
Robotics and Drones
ADM485AN Information
ADM485AN by Analog Devices Inc is a Line Driver or Receiver.
Line Driver or Receivers are under the broader part category of Drivers And Interfaces.
A driver controls the current or voltage delivered to components like LCDs or motors, while an interface component connects systems for data transfer and control. Read more about Drivers And Interfaces on our Drivers And Interfaces part category page.
Price & Stock for ADM485AN
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Bristol Electronics | 170 |
|
RFQ | ||
|
|
Rochester Electronics | 5V Low Power EIA RS-485 Transceiver RoHS: Not Compliant Status: Obsolete Min Qty: 1 | 6256 |
|
$2.3200 / $2.9000 | Buy Now |
|
|
ComSIT USA | Electronic Component RoHS: Not Compliant |
|
|
RFQ | |
|
|
Component Electronics, Inc | IN STOCK SHIP TODAY | 2 |
|
$1.5000 / $2.3100 | Buy Now |
|
|
Vyrian | Interface ICs | 6763 |
|
RFQ |
Part Details for ADM485AN
ADM485AN CAD Models
ADM485AN Part Data Attributes
|
|
ADM485AN
Analog Devices Inc
Buy Now
Datasheet
|
Compare Parts:
ADM485AN
Analog Devices Inc
5 V, Low Power, 5 Mbps, Half Duplex EIA RS-485 Transceiver
|
| Pbfree Code | No | |
| Rohs Code | No | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | ANALOG DEVICES INC | |
| Part Package Code | DIP | |
| Package Description | DIP-8 | |
| Pin Count | 8 | |
| Manufacturer Package Code | N-8 | |
| Reach Compliance Code | not_compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 | |
| Additional Feature | 1 RECEIVER ACTIVE UNDER SHUTDOWN; COMMON I/O; TRISTATABLE RECEIVERS | |
| Differential Output | YES | |
| Driver Number of Bits | 1 | |
| High Level Input Current-Max | 0.000001 A | |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER | |
| Interface IC Type | LINE TRANSCEIVER | |
| Interface Standard | EIA-422; EIA-485 | |
| JESD-30 Code | R-PDIP-T8 | |
| JESD-609 Code | e0 | |
| Length | 9.27 mm | |
| Number of Functions | 1 | |
| Number of Terminals | 8 | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| Out Swing-Min | 1.5 V | |
| Output Characteristics | 3-STATE | |
| Output Low Current-Max | 0.004 A | |
| Output Polarity | COMPLEMENTARY | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | DIP | |
| Package Equivalence Code | DIP8,.3 | |
| Package Shape | RECTANGULAR | |
| Package Style | IN-LINE | |
| Qualification Status | Not Qualified | |
| Receive Delay-Max | 40 ns | |
| Receiver Number of Bits | 1 | |
| Seated Height-Max | 4.57 mm | |
| Supply Current-Max | 2.2 mA | |
| Supply Voltage-Max | 5.25 V | |
| Supply Voltage-Min | 4.75 V | |
| Supply Voltage-Nom | 5 V | |
| Surface Mount | NO | |
| Technology | BICMOS | |
| Temperature Grade | INDUSTRIAL | |
| Terminal Finish | TIN LEAD | |
| Terminal Form | THROUGH-HOLE | |
| Terminal Pitch | 2.54 mm | |
| Terminal Position | DUAL | |
| Transmit Delay-Max | 15 ns | |
| Width | 7.62 mm |
Alternate Parts for ADM485AN
This table gives cross-reference parts and alternative options found for ADM485AN. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of ADM485AN, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| ADM485JN | Analog Devices Inc | $1.7801 | 5 V, Low Power, 5 Mbps, Half Duplex EIA RS-485 Transceiver | ADM485AN vs ADM485JN |
| ADM485JNZ | Analog Devices Inc | $3.1068 | 5 V, Low Power, 5 Mbps, Half Duplex EIA RS-485 Transceiver | ADM485AN vs ADM485JNZ |
| ADM485ANZ | Analog Devices Inc | $3.7584 | 5 V, Low Power, 5 Mbps, Half Duplex EIA RS-485 Transceiver | ADM485AN vs ADM485ANZ |
| ADM1485ANZ | Analog Devices Inc | $5.3487 | 5 V, High Speed (30 Mbps), Low Power, Half Duplex EIA RS-485 Transceiver | ADM485AN vs ADM1485ANZ |
| ADM1485AN | Analog Devices Inc | Check for Price | 5 V, High Speed (30 Mbps), Low Power, Half Duplex EIA RS-485 Transceiver | ADM485AN vs ADM1485AN |
| ADM1485JNZ | Analog Devices Inc | Check for Price | 5 V, High Speed (30 Mbps), Low Power, Half Duplex EIA RS-485 Transceiver | ADM485AN vs ADM1485JNZ |
| ADM1485JN | Analog Devices Inc | Check for Price | 5 V, High Speed (30 Mbps), Low Power, Half Duplex EIA RS-485 Transceiver | ADM485AN vs ADM1485JN |
ADM485AN Frequently Asked Questions (FAQ)
-
The maximum cable length supported by ADM485AN is dependent on the baud rate and cable characteristics. As a general guideline, a maximum cable length of 1000 meters is recommended for baud rates up to 115.2 kbps.
-
To ensure reliable data transmission over long distances, use a high-quality twisted-pair cable, maintain a good signal-to-noise ratio, and implement error-checking mechanisms such as checksums or CRCs in your application.
-
Yes, ADM485AN can be used for half-duplex communication. The device has a transmit enable (TXEN) input that allows the transmitter to be enabled and disabled, enabling half-duplex operation.
-
The ADM485AN supports data rates up to 115.2 kbps.
-
The ADM485AN has a common-mode voltage range of -7 V to +12 V. To handle common-mode voltage, ensure that the voltage on the RS-485 bus is within this range. You can also use external circuitry, such as a common-mode filter, to reduce common-mode noise.