-
Part Symbol
-
Footprint
-
3D Model
Available Download Formats
By downloading CAD models, you agree to our Terms & Conditions and Privacy Policy
Part Details for ADM4850ARMZ-REEL7 by Analog Devices Inc
Results Overview of ADM4850ARMZ-REEL7 by Analog Devices Inc
- Distributor Offerings: (6 listings)
- Number of FFF Equivalents: (1 replacement)
- CAD Models: (Available)
- Number of Functional Equivalents: (0 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
ADM4850ARMZ-REEL7 Information
ADM4850ARMZ-REEL7 by Analog Devices Inc is a Line Driver or Receiver.
Line Driver or Receivers are under the broader part category of Drivers And Interfaces.
A driver controls the current or voltage delivered to components like LCDs or motors, while an interface component connects systems for data transfer and control. Read more about Drivers And Interfaces on our Drivers And Interfaces part category page.
Price & Stock for ADM4850ARMZ-REEL7
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
505-ADM4850ARMZ-REEL7CT-ND
|
DigiKey | IC TRANSCEIVER HALF 1/1 8MSOP Min Qty: 1 Lead time: 10 Weeks Container: Cut Tape (CT), Digi-Reel®, Tape & Reel (TR) |
67 In Stock |
|
$3.3250 / $7.8900 | Buy Now |
|
DISTI #
584-ADM4850ARMZ-R7
|
Mouser Electronics | RS-422/RS-485 Interface IC 115KBps Half Duplex 5V RS485 Trans. I.C. RoHS: Compliant | 556 |
|
$3.4900 / $6.3300 | Buy Now |
|
|
Analog Devices Inc | 115KBps Half Duplex 5V RS485 T Min Qty: 1 Package Multiple: 1000 | 1014 |
|
$3.3250 / $7.8900 | Buy Now |
|
DISTI #
69806762
|
Verical | Single Transmitter/Receiver RS-422/RS-485 8-Pin MSOP T/R RoHS: Compliant Min Qty: 1000 Package Multiple: 1000 | Americas - 1000 |
|
$3.3459 | Buy Now |
|
|
Rochester Electronics | 5V, Slew-Rate Limited, Half-Duplex and Full-Duplex RS-485/RS-422 Transceiver RoHS: Compliant Status: Active Min Qty: 1 | 2850 |
|
$2.7900 / $3.4900 | Buy Now |
|
|
Vyrian | Interface ICs | 916 |
|
RFQ |
Part Details for ADM4850ARMZ-REEL7
ADM4850ARMZ-REEL7 CAD Models
ADM4850ARMZ-REEL7 Part Data Attributes
|
|
ADM4850ARMZ-REEL7
Analog Devices Inc
Buy Now
Datasheet
|
Compare Parts:
ADM4850ARMZ-REEL7
Analog Devices Inc
5 V, ⅛ Load, Slew-Rate Limited, RS-485/RS-422 Transceiver (Half Duplex, 115 kbps)
|
| Pbfree Code | No | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | ANALOG DEVICES INC | |
| Part Package Code | TSSOP | |
| Package Description | ROHS COMPLIANT, MO-187AA, MSOP-8 | |
| Pin Count | 8 | |
| Manufacturer Package Code | RM-8 | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 | |
| Samacsys Manufacturer | Analog Devices | |
| Differential Output | YES | |
| Driver Number of Bits | 1 | |
| High Level Input Current-Max | 0.000001 A | |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER | |
| Interface IC Type | LINE TRANSCEIVER | |
| Interface Standard | EIA-422; EIA-485 | |
| JESD-30 Code | S-PDSO-G8 | |
| JESD-609 Code | e3 | |
| Length | 3 mm | |
| Moisture Sensitivity Level | 1 | |
| Number of Functions | 1 | |
| Number of Terminals | 8 | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| Out Swing-Min | 1.5 V | |
| Output Low Current-Max | 0.004 A | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | TSSOP | |
| Package Equivalence Code | TSSOP8,.19 | |
| Package Shape | SQUARE | |
| Package Style | SMALL OUTLINE, THIN PROFILE, SHRINK PITCH | |
| Peak Reflow Temperature (Cel) | 260 | |
| Qualification Status | Not Qualified | |
| Receive Delay-Max | 1000 ns | |
| Receiver Number of Bits | 1 | |
| Seated Height-Max | 1.1 mm | |
| Supply Current-Max | 0.16 mA | |
| Supply Voltage-Max | 5.25 V | |
| Supply Voltage-Min | 4.75 V | |
| Supply Voltage-Nom | 5 V | |
| Surface Mount | YES | |
| Temperature Grade | INDUSTRIAL | |
| Terminal Finish | Matte Tin (Sn) | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 0.65 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 30 | |
| Transmit Delay-Max | 2500 ns | |
| Width | 3 mm |
Alternate Parts for ADM4850ARMZ-REEL7
This table gives cross-reference parts and alternative options found for ADM4850ARMZ-REEL7. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of ADM4850ARMZ-REEL7, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| ADM4850ARMZ-REEL7 | Rochester Electronics LLC | Check for Price | LINE TRANSCEIVER, PDSO8, ROHS COMPLIANT, MO-187AA, MSOP-8 | ADM4850ARMZ-REEL7 vs ADM4850ARMZ-REEL7 |
ADM4850ARMZ-REEL7 Frequently Asked Questions (FAQ)
-
A good PCB layout for the ADM4850 involves keeping the transmitter and receiver circuits separate, using a ground plane, and minimizing the length of the traces between the IC and the connectors. A 4-layer PCB with a dedicated ground plane is recommended.
-
To ensure reliable communication in noisy environments, use a common-mode choke or a ferrite bead on the bus lines, and consider using a shielded cable. Also, ensure that the ADM4850 is properly terminated and that the bus is properly biased.
-
The maximum cable length supported by the ADM4850 depends on the data rate and the type of cable used. As a general rule, the maximum cable length is approximately 100 meters at 1 Mbps and 50 meters at 10 Mbps. However, this can be extended using repeaters or hubs.
-
To troubleshoot issues with the ADM4850, start by checking the power supply voltage, then verify that the transmitter and receiver are properly connected and terminated. Use an oscilloscope to check the signal quality and look for signs of noise or distortion. Also, check the bus voltage and current to ensure they are within the recommended specifications.
-
Yes, the ADM4850 can be used in a multi-point configuration, but it requires the use of a repeater or hub to connect multiple nodes. The repeater or hub must be designed to handle the increased bus loading and ensure that the signal is properly amplified and re-transmitted.