Part Details for ADM3485EAR-REEL by Analog Devices Inc
Results Overview of ADM3485EAR-REEL by Analog Devices Inc
- Distributor Offerings: (3 listings)
- Number of FFF Equivalents: (1 replacement)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
ADM3485EAR-REEL Information
ADM3485EAR-REEL by Analog Devices Inc is a Line Driver or Receiver.
Line Driver or Receivers are under the broader part category of Drivers And Interfaces.
A driver controls the current or voltage delivered to components like LCDs or motors, while an interface component connects systems for data transfer and control. Read more about Drivers And Interfaces on our Drivers And Interfaces part category page.
Available Datasheets
| Part # | Manufacturer | Description | Datasheet |
|---|---|---|---|
| LMX2325TMX-G | Rochester Electronics LLC | LMX2325 - RoHS - T/R, PLL Freq Synthesizer | |
| HSCHD02CR2001R | Amphenol Communications Solutions | HSC Right Angle plug,Tape and Reel,Brown housing | |
| HSCHD02BR1001R | Amphenol Communications Solutions | HSC Right Angle plug,Tape and Reel,Blue housing |
Price & Stock for ADM3485EAR-REEL
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Bristol Electronics | 1582 |
|
RFQ | ||
|
|
Vyrian | Interface ICs | 9652 |
|
RFQ | |
|
|
Win Source Electronics | IC TXRX RS-485 HS 3.3V 8SOIC | 46560 |
|
$0.5000 / $0.6458 | Buy Now |
Part Details for ADM3485EAR-REEL
ADM3485EAR-REEL CAD Models
ADM3485EAR-REEL Part Data Attributes
|
|
ADM3485EAR-REEL
Analog Devices Inc
Buy Now
Datasheet
|
Compare Parts:
ADM3485EAR-REEL
Analog Devices Inc
IC LINE TRANSCEIVER, PDSO8, MS-012AA, SOIC-8, Line Driver or Receiver
|
| Rohs Code | No | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | ANALOG DEVICES INC | |
| Part Package Code | SOIC | |
| Package Description | MS-012AA, SOIC-8 | |
| Pin Count | 8 | |
| Reach Compliance Code | not_compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 | |
| Differential Output | YES | |
| Driver Number of Bits | 1 | |
| High Level Input Current-Max | 0.000001 A | |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER | |
| Interface IC Type | LINE TRANSCEIVER | |
| Interface Standard | EIA-422; EIA-485 | |
| JESD-30 Code | R-PDSO-G8 | |
| JESD-609 Code | e0 | |
| Length | 4.9 mm | |
| Moisture Sensitivity Level | 1 | |
| Number of Functions | 1 | |
| Number of Terminals | 8 | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| Out Swing-Min | 1.5 V | |
| Output Low Current-Max | 0.0025 A | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | SOP | |
| Package Equivalence Code | SOP8,.25 | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE | |
| Peak Reflow Temperature (Cel) | 240 | |
| Qualification Status | Not Qualified | |
| Receive Delay-Max | 90 ns | |
| Receiver Number of Bits | 1 | |
| Seated Height-Max | 1.75 mm | |
| Supply Current-Max | 1.2 mA | |
| Supply Voltage-Max | 3.6 V | |
| Supply Voltage-Min | 3 V | |
| Supply Voltage-Nom | 3.3 V | |
| Surface Mount | YES | |
| Technology | BICMOS | |
| Temperature Grade | INDUSTRIAL | |
| Terminal Finish | TIN LEAD | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 1.27 mm | |
| Terminal Position | DUAL | |
| Transmit Delay-Max | 35 ns | |
| Width | 3.9 mm |
Alternate Parts for ADM3485EAR-REEL
This table gives cross-reference parts and alternative options found for ADM3485EAR-REEL. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of ADM3485EAR-REEL, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| ADM3485EARZ | Analog Devices Inc | $1.9879 | 3.3 V, ±15 kV ESD-Protected, RS-485/RS-422 Transceiver (Half Duplex, 12Mbps, DE/RE) | ADM3485EAR-REEL vs ADM3485EARZ |
ADM3485EAR-REEL Frequently Asked Questions (FAQ)
-
A good PCB layout for the ADM3485EAR-REEL involves keeping the analog and digital grounds separate, using a solid ground plane, and placing the device close to the signal sources. Additionally, using a shielded enclosure and minimizing the length of the digital signal traces can help reduce EMI and noise.
-
To ensure reliable operation of the ADM3485EAR-REEL in high-temperature environments, it is recommended to follow proper thermal management practices, such as providing adequate heat sinking, using a thermally conductive PCB material, and keeping the device away from heat sources. Additionally, the device should be operated within its specified temperature range of -40°C to +125°C.
-
The maximum cable length that can be used with the ADM3485EAR-REEL without compromising signal integrity depends on the specific application and the type of cable used. However, as a general rule, it is recommended to keep the cable length as short as possible (less than 10 meters) to minimize signal attenuation and distortion. Using a shielded cable and terminating the signal lines properly can also help to improve signal integrity.
-
To troubleshoot common issues with the ADM3485EAR-REEL, it is recommended to follow a systematic approach, starting with checking the power supply and signal connections, and then verifying the device configuration and settings. Using oscilloscopes and logic analyzers can also help to identify signal integrity issues. Additionally, consulting the device datasheet and application notes, as well as seeking support from Analog Devices Inc or online forums, can provide valuable insights and solutions.
-
When using the ADM3485EAR-REEL in a safety-critical application, it is essential to ensure that the device meets the necessary safety certifications and compliance requirements, such as IEC 61508 or ISO 26262. This may involve additional testing and validation, as well as compliance with specific industry standards and regulations. It is recommended to consult with Analog Devices Inc and relevant industry experts to ensure that the device meets the necessary safety requirements.