Part Details for ADG212AKN by Analog Devices Inc
Results Overview of ADG212AKN by Analog Devices Inc
- Distributor Offerings: (3 listings)
- Number of FFF Equivalents: (2 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Education and Research
Aerospace and Defense
Communication and Networking
ADG212AKN Information
ADG212AKN by Analog Devices Inc is a Multiplexer or Switch.
Multiplexers or Switches are under the broader part category of Signal Circuits.
A signal is an electronic means of transmitting information, either as an analog signal with continuous values or a digital signal with discrete values. Signals are used in various systems and networks. Read more about Signal Circuits on our Signal Circuits part category page.
Price & Stock for ADG212AKN
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Quest Components | IC,ANALOG SWITCH,QUAD,SPST,CMOS,DIP,16PIN,PLASTIC | 88 |
|
$4.6505 / $7.5414 | Buy Now |
|
|
Quest Components | IC,ANALOG SWITCH,QUAD,SPST,CMOS,DIP,16PIN,PLASTIC | 40 |
|
$2.8400 / $4.2600 | Buy Now |
|
|
Rochester Electronics | SPST, 4 Func, 1 Channel, CMOS, PDIP16 RoHS: Not Compliant Status: Obsolete Min Qty: 1 | 250 |
|
$2.1800 / $2.7300 | Buy Now |
Part Details for ADG212AKN
ADG212AKN CAD Models
ADG212AKN Part Data Attributes
|
|
ADG212AKN
Analog Devices Inc
Buy Now
Datasheet
|
Compare Parts:
ADG212AKN
Analog Devices Inc
IC QUAD 1-CHANNEL, SGL POLE SGL THROW SWITCH, PDIP16, PLASTIC, DIP-16, Multiplexer or Switch
|
| Rohs Code | No | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | ANALOG DEVICES INC | |
| Part Package Code | DIP | |
| Package Description | PLASTIC, DIP-16 | |
| Pin Count | 16 | |
| Reach Compliance Code | not_compliant | |
| HTS Code | 8542.39.00.01 | |
| Samacsys Manufacturer | Analog Devices | |
| Analog IC - Other Type | SPST | |
| JESD-30 Code | R-PDIP-T16 | |
| JESD-609 Code | e0 | |
| Length | 19.055 mm | |
| Neg Supply Voltage-Nom (Vsup) | -15 V | |
| Normal Position | NO | |
| Number of Channels | 1 | |
| Number of Functions | 4 | |
| Number of Terminals | 16 | |
| Off-state Isolation-Nom | 80 dB | |
| On-state Resistance-Max (Ron) | 115 Ω | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| Output | SEPARATE OUTPUT | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | DIP | |
| Package Equivalence Code | DIP16,.3 | |
| Package Shape | RECTANGULAR | |
| Package Style | IN-LINE | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 4.32 mm | |
| Supply Voltage-Nom (Vsup) | 15 V | |
| Surface Mount | NO | |
| Switch-off Time-Max | 450 ns | |
| Switch-on Time-Max | 600 ns | |
| Switching | BREAK-BEFORE-MAKE | |
| Technology | CMOS | |
| Temperature Grade | INDUSTRIAL | |
| Terminal Finish | TIN LEAD | |
| Terminal Form | THROUGH-HOLE | |
| Terminal Pitch | 2.54 mm | |
| Terminal Position | DUAL | |
| Width | 7.62 mm |
Alternate Parts for ADG212AKN
This table gives cross-reference parts and alternative options found for ADG212AKN. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of ADG212AKN, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| ADG212AKNZ | Analog Devices Inc | $3.4482 | Quad SPST Switch | ADG212AKN vs ADG212AKNZ |
| ADG212AKN | Rochester Electronics LLC | Check for Price | SPST, 4 Func, 1 Channel, CMOS, PDIP16, PLASTIC, DIP-16 | ADG212AKN vs ADG212AKN |
ADG212AKN Frequently Asked Questions (FAQ)
-
To minimize signal degradation and noise, it's recommended to follow a star-grounding layout, keep the signal traces short and away from power traces, and use a solid ground plane. Additionally, use a low-ESR capacitor for power supply decoupling and place it close to the device.
-
The ADG212AKN requires a single 3.3V or 5V power supply. Ensure the power supply is clean and well-regulated. Power sequencing is not critical, but it's recommended to power up the device after the analog supply is stable. A soft-start circuit can be used to prevent inrush currents during power-up.
-
The ADG212AKN can operate up to 100 MHz. However, the signal integrity depends on the specific application, PCB layout, and signal frequency. For high-frequency applications, it's essential to follow proper layout and routing guidelines, use impedance-matched transmission lines, and consider signal termination to minimize reflections and ringing.
-
To configure the ADG212AKN for bidirectional switching, connect the Sx pins to the desired signal direction (high or low). Ensure the signal sources are impedance-matched, and consider adding series resistors to prevent signal reflections. In bidirectional mode, the device's internal resistance increases, which may affect signal attenuation and distortion.
-
The ADG212AKN has built-in ESD protection up to 2 kV human body model (HBM) and 200 V machine model (MM). To prevent latch-up, ensure the device is powered up and down slowly, and avoid applying voltages that exceed the maximum ratings. Additionally, use a low-ESR capacitor for power supply decoupling and consider adding TVS diodes for additional ESD protection.