Part Details for AD9880KSTZ-150 by Analog Devices Inc
Results Overview of AD9880KSTZ-150 by Analog Devices Inc
- Distributor Offerings: (4 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (1 option)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Consumer Electronics
Security and Surveillance
Audio and Video Systems
Virtual Reality (VR), Augmented Reality (AR), and Vision Systems
Medical Imaging
Price & Stock for AD9880KSTZ-150
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Bristol Electronics | 1 |
|
RFQ | ||
|
|
Quest Components | CONSUMER CIRCUIT, CMOS, PQFP100 | 1 |
|
$16.5400 | Buy Now |
|
|
Quest Components | CONSUMER CIRCUIT, CMOS, PQFP100 | 1 |
|
$19.5000 | Buy Now |
|
|
Vyrian | Peripheral ICs | 1003 |
|
RFQ |
Part Details for AD9880KSTZ-150
AD9880KSTZ-150 CAD Models
AD9880KSTZ-150 Part Data Attributes
|
|
AD9880KSTZ-150
Analog Devices Inc
Buy Now
Datasheet
|
Compare Parts:
AD9880KSTZ-150
Analog Devices Inc
Analog/HDMI™ Dual Display Interface
|
| Pbfree Code | No | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | ANALOG DEVICES INC | |
| Part Package Code | QFP | |
| Package Description | LQFP-100 | |
| Pin Count | 100 | |
| Manufacturer Package Code | ST-100-1 | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 | |
| Samacsys Manufacturer | Analog Devices | |
| Additional Feature | IT ALSO REQUIRES 1.7V TO 1.9V FOR OUTPUT | |
| Consumer IC Type | CONSUMER CIRCUIT | |
| JESD-30 Code | S-PQFP-G100 | |
| JESD-609 Code | e3 | |
| Length | 14 mm | |
| Moisture Sensitivity Level | 3 | |
| Number of Functions | 1 | |
| Number of Terminals | 100 | |
| Operating Temperature-Max | 70 °C | |
| Operating Temperature-Min | ||
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | LFQFP | |
| Package Shape | SQUARE | |
| Package Style | FLATPACK, LOW PROFILE, FINE PITCH | |
| Peak Reflow Temperature (Cel) | 260 | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 1.6 mm | |
| Supply Voltage-Max (Vsup) | 3.47 V | |
| Supply Voltage-Min (Vsup) | 3.15 V | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Temperature Grade | COMMERCIAL | |
| Terminal Finish | Matte Tin (Sn) | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 0.5 mm | |
| Terminal Position | QUAD | |
| Time@Peak Reflow Temperature-Max (s) | 30 | |
| Width | 14 mm |
Alternate Parts for AD9880KSTZ-150
This table gives cross-reference parts and alternative options found for AD9880KSTZ-150. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of AD9880KSTZ-150, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| AD9880KSTZ-100 | Analog Devices Inc | Check for Price | Analog/HDMI™ Dual Display Interface | AD9880KSTZ-150 vs AD9880KSTZ-100 |
AD9880KSTZ-150 Frequently Asked Questions (FAQ)
-
A 4-layer PCB with a solid ground plane and a separate power plane is recommended. Keep analog and digital signals separate, and use a common mode filter to reduce noise.
-
Use a 100 ohm differential termination resistor at the receiving end, and ensure the transmission line is impedance-matched to 100 ohms.
-
Power up the analog supply (VCCA) first, followed by the digital supply (VCCD), and finally the clock input. Ensure all power supplies are stable before applying clock and input signals.
-
Consult the AD9880KSTZ-150's application notes and evaluation board documentation for specific guidance. Optimize the device's settings, such as gain and offset, for the specific application requirements.
-
Ensure good airflow around the device, and consider using a heat sink or thermal interface material to reduce thermal resistance. Operate the device within the recommended temperature range (-40°C to 85°C) to ensure reliable operation.