Part Details for AD8616ARMZ-R2 by Analog Devices Inc
Results Overview of AD8616ARMZ-R2 by Analog Devices Inc
- Distributor Offerings: (1 listing)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (4 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
AD8616ARMZ-R2 Information
AD8616ARMZ-R2 by Analog Devices Inc is an Operational Amplifier.
Operational Amplifiers are under the broader part category of Amplifier Circuits.
Amplifier circuits use external power to increase the amplitude of an input signal. They can be used to perform linear amplifications or logarithmic functions. Read more about Amplifier Circuits on our Amplifier Circuits part category page.
Price & Stock for AD8616ARMZ-R2
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Vyrian | Amplifiers | 414 |
|
RFQ |
Part Details for AD8616ARMZ-R2
AD8616ARMZ-R2 CAD Models
AD8616ARMZ-R2 Part Data Attributes
|
|
AD8616ARMZ-R2
Analog Devices Inc
Buy Now
Datasheet
|
Compare Parts:
AD8616ARMZ-R2
Analog Devices Inc
IC DUAL OP-AMP, 800 uV OFFSET-MAX, 23 MHz BAND WIDTH, PDSO8, ROHS COMPLIANT, MO-187AA, MSOP-8, Operational Amplifier
|
| Pbfree Code | Yes | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | ANALOG DEVICES INC | |
| Part Package Code | TSSOP | |
| Package Description | TSSOP, TSSOP8,.19 | |
| Pin Count | 8 | |
| Reach Compliance Code | unknown | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.33.00.01 | |
| Samacsys Manufacturer | Analog Devices | |
| Amplifier Type | OPERATIONAL AMPLIFIER | |
| Architecture | VOLTAGE-FEEDBACK | |
| Average Bias Current-Max (IIB) | 0.00055 µA | |
| Bias Current-Max (IIB) @25C | 0.000001 µA | |
| Common-mode Reject Ratio-Nom | 100 dB | |
| Frequency Compensation | YES | |
| Input Offset Voltage-Max | 800 µV | |
| JESD-30 Code | S-PDSO-G8 | |
| JESD-609 Code | e3 | |
| Length | 3 mm | |
| Low-Bias | YES | |
| Low-Offset | YES | |
| Micropower | NO | |
| Moisture Sensitivity Level | 1 | |
| Number of Functions | 2 | |
| Number of Terminals | 8 | |
| Operating Temperature-Max | 125 °C | |
| Operating Temperature-Min | -40 °C | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | TSSOP | |
| Package Equivalence Code | TSSOP8,.19 | |
| Package Shape | SQUARE | |
| Package Style | SMALL OUTLINE, THIN PROFILE, SHRINK PITCH | |
| Packing Method | TAPE AND REEL | |
| Peak Reflow Temperature (Cel) | 260 | |
| Power | NO | |
| Programmable Power | NO | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 1.1 mm | |
| Slew Rate-Nom | 12 V/us | |
| Supply Current-Max | 5 mA | |
| Supply Voltage Limit-Max | 6 V | |
| Supply Voltage-Nom (Vsup) | 2.7 V | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Temperature Grade | AUTOMOTIVE | |
| Terminal Finish | Matte Tin (Sn) - annealed | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 0.65 mm | |
| Terminal Position | DUAL | |
| Unity Gain BW-Nom | 23000 | |
| Voltage Gain-Min | 55000 | |
| Wideband | NO | |
| Width | 3 mm |
Alternate Parts for AD8616ARMZ-R2
This table gives cross-reference parts and alternative options found for AD8616ARMZ-R2. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of AD8616ARMZ-R2, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| AD8616ARMZ-REEL | Analog Devices Inc | $2.7865 | Precision 20 MHz CMOS Rail-to-Rail Dual Operational Amplifier | AD8616ARMZ-R2 vs AD8616ARMZ-REEL |
| AD8616ARM | Analog Devices Inc | Check for Price | IC DUAL OP-AMP, 750 uV OFFSET-MAX, 20 MHz BAND WIDTH, PDSO8, MICRO, SOIC-8, Operational Amplifier | AD8616ARMZ-R2 vs AD8616ARM |
| AD8616ARMZ | Rochester Electronics LLC | Check for Price | DUAL OP-AMP, 800 uV OFFSET-MAX, 23 MHz BAND WIDTH, PDSO8, ROHS COMPLIANT, MO-187AA, MSOP-8 | AD8616ARMZ-R2 vs AD8616ARMZ |
| AD8616ARM-R2 | Analog Devices Inc | Check for Price | IC DUAL OP-AMP, 800 uV OFFSET-MAX, 23 MHz BAND WIDTH, PDSO8, MO-187AA, MSOP-8, Operational Amplifier | AD8616ARMZ-R2 vs AD8616ARM-R2 |
AD8616ARMZ-R2 Frequently Asked Questions (FAQ)
-
The maximum power dissipation of the AD8616 is 670mW, which is calculated based on the maximum junction temperature (TJ) of 150°C and the thermal resistance (θJA) of 125°C/W.
-
To ensure stability, it's essential to follow proper PCB layout practices, minimize parasitic capacitance, and use a compensation capacitor (if necessary) as recommended in the datasheet. Additionally, consider using a series resistor (Rs) to isolate the op-amp input from the capacitive load.
-
For optimal performance, keep the input traces short and away from noise sources. Use a ground plane to minimize noise coupling, and avoid routing signals over gaps in the ground plane. Also, keep the power supply decoupling capacitors close to the op-amp.
-
While the AD8616 is an op-amp, it's not recommended to use it as a comparator. The op-amp's output stage is not designed for high-speed switching, and it may not provide the desired performance or reliability in a comparator application.
-
To prevent electrostatic discharge (ESD) damage, handle the AD8616 with an anti-static wrist strap or mat, and ensure that the PCB is properly grounded. Also, consider adding ESD protection diodes or resistors to the input pins, as recommended in the datasheet.