Part Details for AD8572ARU-REEL by Analog Devices Inc
Results Overview of AD8572ARU-REEL by Analog Devices Inc
- Distributor Offerings: (1 listing)
- Number of FFF Equivalents: (2 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (3 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Education and Research
Environmental Monitoring
Industrial Automation
Agriculture Technology
Medical Imaging
AD8572ARU-REEL Information
AD8572ARU-REEL by Analog Devices Inc is an Operational Amplifier.
Operational Amplifiers are under the broader part category of Amplifier Circuits.
Amplifier circuits use external power to increase the amplitude of an input signal. They can be used to perform linear amplifications or logarithmic functions. Read more about Amplifier Circuits on our Amplifier Circuits part category page.
Price & Stock for AD8572ARU-REEL
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Rochester Electronics | Operational Amplifier, 2 Func, 10uV Offset-Max, CMOS, PDSO8 RoHS: Not Compliant Status: Obsolete Min Qty: 1 | 3 |
|
$2.1800 / $2.7300 | Buy Now |
Part Details for AD8572ARU-REEL
AD8572ARU-REEL CAD Models
AD8572ARU-REEL Part Data Attributes
|
|
AD8572ARU-REEL
Analog Devices Inc
Buy Now
Datasheet
|
Compare Parts:
AD8572ARU-REEL
Analog Devices Inc
IC DUAL OP-AMP, 10 uV OFFSET-MAX, 1.5 MHz BAND WIDTH, PDSO8, MO-153AA, TSSOP-8, Operational Amplifier
|
| Rohs Code | No | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | ANALOG DEVICES INC | |
| Part Package Code | TSSOP | |
| Package Description | MO-153AA, TSSOP-8 | |
| Pin Count | 8 | |
| Reach Compliance Code | not_compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.33.00.01 | |
| Amplifier Type | OPERATIONAL AMPLIFIER | |
| Architecture | CHOPPER-STAB | |
| Average Bias Current-Max (IIB) | 0.0004 µA | |
| Bias Current-Max (IIB) @25C | 0.00005 µA | |
| Common-mode Reject Ratio-Nom | 130 dB | |
| Frequency Compensation | YES | |
| Input Offset Voltage-Max | 10 µV | |
| JESD-30 Code | R-PDSO-G8 | |
| JESD-609 Code | e0 | |
| Length | 4.4 mm | |
| Low-Bias | YES | |
| Low-Offset | YES | |
| Micropower | NO | |
| Moisture Sensitivity Level | 1 | |
| Number of Functions | 2 | |
| Number of Terminals | 8 | |
| Operating Temperature-Max | 125 °C | |
| Operating Temperature-Min | -40 °C | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | TSSOP | |
| Package Equivalence Code | TSSOP8,.25 | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE, THIN PROFILE, SHRINK PITCH | |
| Packing Method | TR | |
| Peak Reflow Temperature (Cel) | 240 | |
| Power | NO | |
| Programmable Power | NO | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 1.2 mm | |
| Slew Rate-Nom | 0.4 V/us | |
| Supply Current-Max | 2.14 mA | |
| Supply Voltage Limit-Max | 6 V | |
| Supply Voltage-Nom (Vsup) | 5 V | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Temperature Grade | AUTOMOTIVE | |
| Terminal Finish | TIN LEAD | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 0.65 mm | |
| Terminal Position | DUAL | |
| Unity Gain BW-Nom | 1500 | |
| Voltage Gain-Min | 178000 | |
| Wideband | NO | |
| Width | 3 mm |
Alternate Parts for AD8572ARU-REEL
This table gives cross-reference parts and alternative options found for AD8572ARU-REEL. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of AD8572ARU-REEL, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| AD8572ARUZ-REEL | Rochester Electronics LLC | Check for Price | DUAL OP-AMP, 10uV OFFSET-MAX, 1.5MHz BAND WIDTH, PDSO8, ROHS COMPLIANT, MO-153AA, TSSOP-8 | AD8572ARU-REEL vs AD8572ARUZ-REEL |
| AD8572ARUZ | Rochester Electronics LLC | Check for Price | DUAL OP-AMP, 10uV OFFSET-MAX, 1.5MHz BAND WIDTH, PDSO8, ROHS COMPLIANT, MO-153AA, TSSOP-8 | AD8572ARU-REEL vs AD8572ARUZ |
AD8572ARU-REEL Frequently Asked Questions (FAQ)
-
A good PCB layout for the AD8572ARU-REEL involves keeping the input and output traces short and separate, using a solid ground plane, and placing decoupling capacitors close to the device. A 4-layer PCB with a dedicated analog ground plane is recommended.
-
To ensure proper biasing, connect the VCC pin to a stable voltage source between 2.7V and 5.5V, and the GND pin to a solid ground plane. The input common-mode voltage should be within the range of VCC-1.5V to VCC-0.5V. Additionally, ensure that the output load is within the recommended range of 1kΩ to 10kΩ.
-
The maximum power dissipation of the AD8572ARU-REEL is 500mW. To ensure reliable operation, the device should be operated at a junction temperature below 150°C. A thermal pad or heat sink may be required for high-power applications.
-
The AD8572ARU-REEL is specified to operate from -40°C to 125°C. However, the device's performance may degrade at high temperatures. For applications above 85°C, consult the datasheet for derating information and consider using a heat sink or thermal pad to maintain a safe junction temperature.
-
Common issues with the AD8572ARU-REEL can be troubleshooted by checking the PCB layout for noise and signal integrity issues, ensuring proper power supply decoupling, and verifying that the input and output signals are within the recommended ranges. Additionally, consult the datasheet for application notes and troubleshooting guides.