Part Details for AD8529ARM-REEL by Analog Devices Inc
Results Overview of AD8529ARM-REEL by Analog Devices Inc
- Distributor Offerings: (1 listing)
- Number of FFF Equivalents: (1 replacement)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (6 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Education and Research
Internet of Things (IoT)
Computing and Data Storage
Aerospace and Defense
Healthcare
Telecommunications
Automotive
AD8529ARM-REEL Information
AD8529ARM-REEL by Analog Devices Inc is an Operational Amplifier.
Operational Amplifiers are under the broader part category of Amplifier Circuits.
Amplifier circuits use external power to increase the amplitude of an input signal. They can be used to perform linear amplifications or logarithmic functions. Read more about Amplifier Circuits on our Amplifier Circuits part category page.
Price & Stock for AD8529ARM-REEL
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Rochester Electronics | Operational Amplifier, 2 Func, 1100uV Offset-Max, BIPolar, PDSO8 RoHS: Not Compliant Status: Obsolete Min Qty: 1 | 158010 |
|
$1.3000 / $1.6300 | Buy Now |
Part Details for AD8529ARM-REEL
AD8529ARM-REEL CAD Models
AD8529ARM-REEL Part Data Attributes
|
|
AD8529ARM-REEL
Analog Devices Inc
Buy Now
Datasheet
|
Compare Parts:
AD8529ARM-REEL
Analog Devices Inc
IC DUAL OP-AMP, 1100 uV OFFSET-MAX, 8 MHz BAND WIDTH, PDSO8, MO-187AA, MSOP-8, Operational Amplifier
|
| Rohs Code | No | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | ANALOG DEVICES INC | |
| Part Package Code | TSSOP | |
| Package Description | MO-187AA, MSOP-8 | |
| Pin Count | 8 | |
| Reach Compliance Code | not_compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.33.00.01 | |
| Amplifier Type | OPERATIONAL AMPLIFIER | |
| Architecture | VOLTAGE-FEEDBACK | |
| Average Bias Current-Max (IIB) | 0.4 µA | |
| Bias Current-Max (IIB) @25C | 0.3 µA | |
| Common-mode Reject Ratio-Nom | 100 dB | |
| Frequency Compensation | YES | |
| Input Offset Voltage-Max | 1100 µV | |
| JESD-30 Code | S-PDSO-G8 | |
| JESD-609 Code | e0 | |
| Length | 3 mm | |
| Low-Offset | NO | |
| Moisture Sensitivity Level | 1 | |
| Neg Supply Voltage Limit-Max | -6 V | |
| Neg Supply Voltage-Nom (Vsup) | -5 V | |
| Number of Functions | 2 | |
| Number of Terminals | 8 | |
| Operating Temperature-Max | 125 °C | |
| Operating Temperature-Min | -40 °C | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | TSSOP | |
| Package Equivalence Code | TSSOP8,.19 | |
| Package Shape | SQUARE | |
| Package Style | SMALL OUTLINE, THIN PROFILE, SHRINK PITCH | |
| Packing Method | TR | |
| Peak Reflow Temperature (Cel) | 240 | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 1.1 mm | |
| Slew Rate-Nom | 2.9 V/us | |
| Supply Current-Max | 1.4 mA | |
| Supply Voltage Limit-Max | 6 V | |
| Supply Voltage-Nom (Vsup) | 5 V | |
| Surface Mount | YES | |
| Technology | BIPOLAR | |
| Temperature Grade | AUTOMOTIVE | |
| Terminal Finish | TIN LEAD | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 0.65 mm | |
| Terminal Position | DUAL | |
| Unity Gain BW-Nom | 8000 | |
| Voltage Gain-Min | 20000 | |
| Width | 3 mm |
Alternate Parts for AD8529ARM-REEL
This table gives cross-reference parts and alternative options found for AD8529ARM-REEL. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of AD8529ARM-REEL, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| AD8529ARM-REEL | Rochester Electronics LLC | Check for Price | DUAL OP-AMP, 1100 uV OFFSET-MAX, 8 MHz BAND WIDTH, PDSO8, MO-187AA, MSOP-8 | AD8529ARM-REEL vs AD8529ARM-REEL |
AD8529ARM-REEL Frequently Asked Questions (FAQ)
-
A good PCB layout for the AD8529 involves keeping the analog and digital grounds separate, using a solid ground plane, and minimizing noise coupling between the input and output stages. A 4-layer PCB with a dedicated analog ground layer is recommended. Additionally, the input and output traces should be kept short and away from each other to minimize capacitive coupling.
-
The AD8529 requires a clean and stable power supply. A low-ESR capacitor (e.g., 10uF) should be placed close to the device's power pins to decouple the supply. Additionally, a 100nF capacitor can be used to decouple the analog and digital supplies. The power supply should be regulated and filtered to minimize noise and ripple.
-
The recommended input signal range for the AD8529 is 0V to 2.5V, with a maximum input voltage of 3.6V. Signals outside this range may cause the device to saturate or behave erratically. It's essential to ensure the input signal is within the specified range to maintain accurate and reliable operation.
-
To minimize noise, the AD8529 should be operated in a low-noise environment, and the input signal should be properly filtered and shielded. The device's noise performance can be further improved by using a low-noise power supply, minimizing digital noise coupling, and using a high-quality PCB with a solid ground plane.
-
The AD8529 is specified to operate over a temperature range of -40°C to +125°C. However, the device's performance may degrade at extreme temperatures, and the user should ensure the device is operated within the recommended temperature range to maintain optimal performance and reliability.