Part Details for AD8512ARMZ-R2 by Analog Devices Inc
Results Overview of AD8512ARMZ-R2 by Analog Devices Inc
- Distributor Offerings: (1 listing)
- Number of FFF Equivalents: (1 replacement)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (8 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Education and Research
AD8512ARMZ-R2 Information
AD8512ARMZ-R2 by Analog Devices Inc is an Operational Amplifier.
Operational Amplifiers are under the broader part category of Amplifier Circuits.
Amplifier circuits use external power to increase the amplitude of an input signal. They can be used to perform linear amplifications or logarithmic functions. Read more about Amplifier Circuits on our Amplifier Circuits part category page.
Price & Stock for AD8512ARMZ-R2
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Vyrian | Amplifiers | 295 |
|
RFQ |
Part Details for AD8512ARMZ-R2
AD8512ARMZ-R2 CAD Models
AD8512ARMZ-R2 Part Data Attributes
|
|
AD8512ARMZ-R2
Analog Devices Inc
Buy Now
Datasheet
|
Compare Parts:
AD8512ARMZ-R2
Analog Devices Inc
IC DUAL OP-AMP, 1800 uV OFFSET-MAX, 8 MHz BAND WIDTH, PDSO8, ROHS COMPLIANT, MO-187AA, MSOP-8, Operational Amplifier
|
| Pbfree Code | Yes | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | ANALOG DEVICES INC | |
| Part Package Code | TSSOP | |
| Package Description | ROHS COMPLIANT, MO-187AA, MSOP-8 | |
| Pin Count | 8 | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.33.00.01 | |
| Samacsys Manufacturer | Analog Devices | |
| Amplifier Type | OPERATIONAL AMPLIFIER | |
| Architecture | VOLTAGE-FEEDBACK | |
| Average Bias Current-Max (IIB) | 0.0075 µA | |
| Bias Current-Max (IIB) @25C | 0.00008 µA | |
| Common-mode Reject Ratio-Nom | 100 dB | |
| Frequency Compensation | YES | |
| Input Offset Voltage-Max | 1800 µV | |
| JESD-30 Code | S-PDSO-G8 | |
| JESD-609 Code | e3 | |
| Length | 3 mm | |
| Low-Bias | YES | |
| Low-Offset | NO | |
| Micropower | NO | |
| Moisture Sensitivity Level | 1 | |
| Neg Supply Voltage Limit-Max | -18 V | |
| Neg Supply Voltage-Nom (Vsup) | -5 V | |
| Number of Functions | 2 | |
| Number of Terminals | 8 | |
| Operating Temperature-Max | 125 °C | |
| Operating Temperature-Min | -40 °C | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | TSSOP | |
| Package Equivalence Code | TSSOP8,.19 | |
| Package Shape | SQUARE | |
| Package Style | SMALL OUTLINE, THIN PROFILE, SHRINK PITCH | |
| Packing Method | TR | |
| Power | NO | |
| Programmable Power | NO | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 1.1 mm | |
| Slew Rate-Nom | 20 V/us | |
| Supply Current-Max | 5.2 mA | |
| Supply Voltage Limit-Max | 18 V | |
| Supply Voltage-Nom (Vsup) | 5 V | |
| Surface Mount | YES | |
| Technology | JFET | |
| Temperature Grade | AUTOMOTIVE | |
| Terminal Finish | Matte Tin (Sn) - annealed | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 0.65 mm | |
| Terminal Position | DUAL | |
| Unity Gain BW-Nom | 8000 | |
| Wideband | NO | |
| Width | 3 mm |
Alternate Parts for AD8512ARMZ-R2
This table gives cross-reference parts and alternative options found for AD8512ARMZ-R2. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of AD8512ARMZ-R2, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| AD8512ARMZ-REEL7 | Analog Devices Inc | Check for Price | DUAL OP-AMP, 1800uV OFFSET-MAX, 8MHz BAND WIDTH, PDSO8 | AD8512ARMZ-R2 vs AD8512ARMZ-REEL7 |
AD8512ARMZ-R2 Frequently Asked Questions (FAQ)
-
The recommended power-up sequence is to apply the power supplies (V+ and V-) before applying the input signals. This ensures that the internal biasing circuitry is established before the input signals are applied.
-
To minimize noise and EMI, keep the input and output traces short and away from each other, use a solid ground plane, and decouple the power supplies with capacitors. Also, consider using a shielded enclosure and keeping the circuit away from high-frequency sources.
-
Yes, the AD8512 can be used as a unity-gain buffer. However, it's essential to ensure that the input impedance is matched to the source impedance to prevent signal attenuation. Also, consider the output impedance of the AD8512, which is typically around 1 kΩ, when designing the circuit.
-
The AD8512 has a typical offset voltage of 0.5 mV. To handle this, you can use an offset nulling circuit or adjust the input signal to compensate for the offset. Alternatively, consider using an op-amp with a lower offset voltage or an auto-zeroing op-amp.
-
The AD8512 can drive capacitive loads up to 1 nF without oscillation. However, it's recommended to use a series resistor to dampen the load and prevent oscillation. The maximum capacitive load also depends on the output impedance and the frequency of operation.