Part Details for AD822ARMZ-R2 by Analog Devices Inc
Results Overview of AD822ARMZ-R2 by Analog Devices Inc
- Distributor Offerings: (1 listing)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (4 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
AD822ARMZ-R2 Information
AD822ARMZ-R2 by Analog Devices Inc is an Operational Amplifier.
Operational Amplifiers are under the broader part category of Amplifier Circuits.
Amplifier circuits use external power to increase the amplitude of an input signal. They can be used to perform linear amplifications or logarithmic functions. Read more about Amplifier Circuits on our Amplifier Circuits part category page.
Price & Stock for AD822ARMZ-R2
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Vyrian | Amplifiers | 935 |
|
RFQ |
Part Details for AD822ARMZ-R2
AD822ARMZ-R2 CAD Models
AD822ARMZ-R2 Part Data Attributes
|
|
AD822ARMZ-R2
Analog Devices Inc
Buy Now
Datasheet
|
Compare Parts:
AD822ARMZ-R2
Analog Devices Inc
IC DUAL OP-AMP, 3000 uV OFFSET-MAX, 1.9 MHz BAND WIDTH, PDSO8, LEAD FREE, MO-187AA, MSOP-8, Operational Amplifier
|
| Pbfree Code | Yes | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | ANALOG DEVICES INC | |
| Part Package Code | TSSOP | |
| Package Description | TSSOP, TSSOP8,.19 | |
| Pin Count | 8 | |
| Reach Compliance Code | unknown | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.33.00.01 | |
| Samacsys Manufacturer | Analog Devices | |
| Amplifier Type | OPERATIONAL AMPLIFIER | |
| Architecture | VOLTAGE-FEEDBACK | |
| Average Bias Current-Max (IIB) | 0.000025 µA | |
| Bias Current-Max (IIB) @25C | 0.000025 µA | |
| Common-mode Reject Ratio-Nom | 80 dB | |
| Frequency Compensation | YES | |
| Input Offset Voltage-Max | 3000 µV | |
| JESD-30 Code | S-PDSO-G8 | |
| JESD-609 Code | e3 | |
| Length | 3 mm | |
| Low-Bias | YES | |
| Low-Offset | NO | |
| Micropower | YES | |
| Neg Supply Voltage Limit-Max | -18 V | |
| Neg Supply Voltage-Nom (Vsup) | -15 V | |
| Number of Functions | 2 | |
| Number of Terminals | 8 | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | TSSOP | |
| Package Equivalence Code | TSSOP8,.19 | |
| Package Shape | SQUARE | |
| Package Style | SMALL OUTLINE, THIN PROFILE, SHRINK PITCH | |
| Packing Method | TAPE AND REEL | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 1.1 mm | |
| Slew Rate-Nom | 3 V/us | |
| Supply Current-Max | 1.8 mA | |
| Supply Voltage Limit-Max | 18 V | |
| Supply Voltage-Nom (Vsup) | 15 V | |
| Surface Mount | YES | |
| Technology | BIPOLAR | |
| Temperature Grade | INDUSTRIAL | |
| Terminal Finish | MATTE TIN | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 0.65 mm | |
| Terminal Position | DUAL | |
| Unity Gain BW-Nom | 1900 | |
| Voltage Gain-Min | 10000 | |
| Width | 3 mm |
Alternate Parts for AD822ARMZ-R2
This table gives cross-reference parts and alternative options found for AD822ARMZ-R2. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of AD822ARMZ-R2, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| AD822ARMZ | Analog Devices Inc | $7.0470 | Single-Supply, Rail-to-Rail Low Power FET-Input Dual Op Amp | AD822ARMZ-R2 vs AD822ARMZ |
| AD822ARMZ-REEL | Analog Devices Inc | $7.6060 | Single-Supply, Rail-to-Rail Low Power FET-Input Dual Op Amp | AD822ARMZ-R2 vs AD822ARMZ-REEL |
| AD822ARMZ-R2 | Rochester Electronics LLC | Check for Price | Operational Amplifier, | AD822ARMZ-R2 vs AD822ARMZ-R2 |
| AD822ARM-R2 | Analog Devices Inc | Check for Price | IC DUAL OP-AMP, 3000 uV OFFSET-MAX, 1.9 MHz BAND WIDTH, PDSO8, MO-187AA, MSOP-8, Operational Amplifier | AD822ARMZ-R2 vs AD822ARM-R2 |
AD822ARMZ-R2 Frequently Asked Questions (FAQ)
-
A good PCB layout for the AD822ARMZ-R2 involves keeping the input and output traces short and away from noise sources, using a solid ground plane, and placing decoupling capacitors close to the device. A 4-layer PCB with a dedicated analog ground plane is recommended.
-
The AD822ARMZ-R2 is specified to operate from -40°C to 125°C. Ensure that the device is properly heatsinked and that the ambient temperature is within the specified range. Also, consider the power dissipation and thermal resistance of the device when designing the system.
-
The recommended input impedance for the AD822ARMZ-R2 is 1 kΩ or higher. This ensures that the input signal is not attenuated and that the device operates within its specified common-mode rejection ratio (CMRR).
-
Yes, the AD822ARMZ-R2 can be used as a single-ended amplifier by tying the negative input to ground and applying the signal to the positive input. However, this will reduce the common-mode rejection ratio (CMRR) and increase the noise susceptibility of the device.
-
To reduce noise and EMI, use a low-pass filter at the input, keep the input and output traces short and away from noise sources, use a shielded enclosure, and consider adding a common-mode choke or ferrite bead to the input lines.