-
Part Symbol
-
Footprint
-
3D Model
Available Download Formats
By downloading CAD models, you agree to our Terms & Conditions and Privacy Policy
Part Details for AD8197ASTZ by Analog Devices Inc
Results Overview of AD8197ASTZ by Analog Devices Inc
- Distributor Offerings: (5 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Available)
- Number of Functional Equivalents: (0 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Consumer Electronics
Price & Stock for AD8197ASTZ
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
505-AD8197ASTZ-ND
|
DigiKey | IC VIDEO SWITCH 100LQFP Min Qty: 90 Lead time: 10 Weeks Container: Tray | Temporarily Out of Stock |
|
$11.4000 | Buy Now |
|
DISTI #
584-AD8197ASTZ
|
Mouser Electronics | Equalizers 4:1 DVI/HDMI Switch RoHS: Compliant | 0 |
|
$11.4000 | Order Now |
|
|
Analog Devices Inc | 4:1 DVI/HDMI Switch Package Multiple: 90 | 90 |
|
$6.6200 / $19.8800 | Buy Now |
|
DISTI #
26616786
|
Verical | Analog Multiplexer Single 4:1 100-Pin LQFP Tray RoHS: Compliant Min Qty: 90 Package Multiple: 90 | Americas - 90 |
|
$11.2801 | Buy Now |
|
|
Bristol Electronics | 7 |
|
RFQ |
Part Details for AD8197ASTZ
AD8197ASTZ CAD Models
AD8197ASTZ Part Data Attributes
|
|
AD8197ASTZ
Analog Devices Inc
Buy Now
Datasheet
|
Compare Parts:
AD8197ASTZ
Analog Devices Inc
4:1 HDMI/DVI Switch with Equalization
|
| Pbfree Code | No | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | ANALOG DEVICES INC | |
| Part Package Code | QFP | |
| Package Description | 14 X 14 MM, LEAD FREE, MS-028BED, LQFP-100 | |
| Pin Count | 100 | |
| Manufacturer Package Code | ST-100-1 | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 | |
| Samacsys Manufacturer | Analog Devices | |
| JESD-609 Code | e3 | |
| Moisture Sensitivity Level | 3 | |
| Peak Reflow Temperature (Cel) | 260 | |
| Terminal Finish | Matte Tin (Sn) |
AD8197ASTZ Frequently Asked Questions (FAQ)
-
A good PCB layout for the AD8197ASTZ involves keeping the input and output traces short and away from each other, using a solid ground plane, and placing decoupling capacitors close to the device. A 4-layer PCB with a dedicated ground plane is recommended. Additionally, the input and output pins should be routed on separate layers to minimize crosstalk.
-
The AD8197ASTZ requires a dual supply voltage of ±2.5V to ±15V. Ensure that the voltage supplies are well-regulated and decoupled with 10uF capacitors. The device also requires a bias voltage of 1.35V, which can be generated using a voltage divider or a dedicated voltage reference. The bias voltage should be decoupled with a 100nF capacitor.
-
The AD8197ASTZ can handle input voltages up to ±10V, but the maximum input voltage is limited by the supply voltage. The input voltage should not exceed the supply voltage by more than 0.5V. Exceeding the maximum input voltage can cause damage to the device.
-
To reduce noise and distortion in the AD8197ASTZ output, ensure that the input signals are properly filtered and terminated. Use a low-pass filter or a band-pass filter to remove high-frequency noise and harmonics. Additionally, use a shielded cable or a twisted pair to connect the input signals to the device. The output should also be properly terminated with a 50Ω load to minimize reflections and ringing.
-
Yes, the AD8197ASTZ can be used in a single-supply application, but it requires a level-shifting circuit to shift the input signal to the correct voltage range. A voltage divider or a level-shifting amplifier can be used to shift the input signal. However, the single-supply operation may affect the device's performance and accuracy.