Part Details for AD815ARB-24 by Analog Devices Inc
Results Overview of AD815ARB-24 by Analog Devices Inc
- Distributor Offerings: (8 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (5 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Consumer Electronics
Audio and Video Systems
Telecommunications
AD815ARB-24 Information
AD815ARB-24 by Analog Devices Inc is a Line Driver or Receiver.
Line Driver or Receivers are under the broader part category of Drivers And Interfaces.
A driver controls the current or voltage delivered to components like LCDs or motors, while an interface component connects systems for data transfer and control. Read more about Drivers And Interfaces on our Drivers And Interfaces part category page.
Price & Stock for AD815ARB-24
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Bristol Electronics | 3574 |
|
RFQ | ||
|
|
Quest Components | IC,OP-AMP,DUAL,BIPOLAR,SOP,24PIN,PLASTIC | 5784 |
|
$6.3300 / $12.6600 | Buy Now |
|
|
Quest Components | IC,OP-AMP,DUAL,BIPOLAR,SOP,24PIN,PLASTIC | 1339 |
|
$18.2684 / $24.3578 | Buy Now |
|
|
Quest Components | IC,OP-AMP,DUAL,BIPOLAR,SOP,24PIN,PLASTIC | 360 |
|
$4.3160 / $9.9600 | Buy Now |
|
|
Quest Components | IC,OP-AMP,DUAL,BIPOLAR,SOP,24PIN,PLASTIC | 307 |
|
$12.8000 / $18.0000 | Buy Now |
|
|
Quest Components | IC,OP-AMP,DUAL,BIPOLAR,SOP,24PIN,PLASTIC | 30 |
|
$11.7105 / $14.2425 | Buy Now |
|
|
Quest Components | IC,OP-AMP,DUAL,BIPOLAR,SOP,24PIN,PLASTIC | 29 |
|
$14.8000 / $18.0000 | Buy Now |
|
|
Rochester Electronics | Line Driver, 1 Func, 2 Driver, BIPolar, PDSO24 RoHS: Not Compliant Status: Obsolete Min Qty: 1 | 37311 |
|
$7.1500 / $8.9400 | Buy Now |
Part Details for AD815ARB-24
AD815ARB-24 CAD Models
AD815ARB-24 Part Data Attributes
|
|
AD815ARB-24
Analog Devices Inc
Buy Now
Datasheet
|
Compare Parts:
AD815ARB-24
Analog Devices Inc
IC LINE DRIVER, PDSO24, THERMALLY ENHANCED, SOIC-24, Line Driver or Receiver
|
| Rohs Code | No | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | ANALOG DEVICES INC | |
| Part Package Code | SOIC | |
| Package Description | THERMALLY ENHANCED, SOIC-24 | |
| Pin Count | 24 | |
| Reach Compliance Code | unknown | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 | |
| Samacsys Manufacturer | Analog Devices | |
| Differential Output | YES | |
| Driver Number of Bits | 2 | |
| Input Characteristics | DIFFERENTIAL | |
| Interface IC Type | LINE DRIVER | |
| Interface Standard | GENERAL PURPOSE | |
| JESD-30 Code | R-PDSO-G24 | |
| JESD-609 Code | e0 | |
| Length | 15.4 mm | |
| Moisture Sensitivity Level | 5 | |
| Number of Functions | 2 | |
| Number of Terminals | 24 | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| Output Characteristics | TOTEM-POLE | |
| Output Polarity | COMPLEMENTARY | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | HSOP | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE, HEAT SINK/SLUG | |
| Peak Reflow Temperature (Cel) | 225 | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 2.65 mm | |
| Supply Current-Max | 55 mA | |
| Supply Voltage-Max | 18 V | |
| Supply Voltage-Min | 5 V | |
| Supply Voltage-Nom | 15 V | |
| Surface Mount | YES | |
| Technology | BIPOLAR | |
| Temperature Grade | INDUSTRIAL | |
| Terminal Finish | TIN LEAD | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 1.27 mm | |
| Terminal Position | DUAL | |
| Width | 7.5 mm |
Alternate Parts for AD815ARB-24
This table gives cross-reference parts and alternative options found for AD815ARB-24. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of AD815ARB-24, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| THS6012IDWP | Texas Instruments | $5.1099 | 500-mA Dual Differential DSL and PLC Line Driver 20-SO PowerPAD -40 to 85 | AD815ARB-24 vs THS6012IDWP |
| AD815ARBZ-24Z-REEL | Analog Devices Inc | Check for Price | LINE DRIVER, PDSO24, THERMALLY ENHANCED, SOIC-24 | AD815ARB-24 vs AD815ARBZ-24Z-REEL |
| THS6012CDWPRG4 | Texas Instruments | Check for Price | DUAL LINE DRIVER, PDSO20, GREEN, PLASTIC, SOIC-20 | AD815ARB-24 vs THS6012CDWPRG4 |
| AD815ARBZ-24 | Analog Devices Inc | Check for Price | High Output Current Differential Driver | AD815ARB-24 vs AD815ARBZ-24 |
| THS6012CDWPR | Texas Instruments | Check for Price | 500-mA Dual Differential DSL and PLC Line Driver 20-SO PowerPAD 0 to 70 | AD815ARB-24 vs THS6012CDWPR |
AD815ARB-24 Frequently Asked Questions (FAQ)
-
A good PCB layout is crucial for the AD815ARB-24. Ensure a solid ground plane, keep the input and output traces short and separate, and use a low-impedance path for the power supply. Also, place the device close to the power supply and use a decoupling capacitor (e.g., 10nF) between VCC and GND.
-
The AD815ARB-24 has a thermal pad on the bottom of the package. Ensure good thermal conductivity by using a thermal interface material (e.g., thermal tape or thermal grease) and a heat sink or a metal plate on the PCB. This will help to dissipate heat and prevent overheating.
-
For optimal performance, use a 50Ω termination for both the input and output signals. This will help to minimize signal reflections and ensure proper signal integrity.
-
Yes, the AD815ARB-24 can be used in differential signaling applications. However, it's essential to follow the recommended layout and termination guidelines to ensure proper common-mode rejection and signal integrity.
-
To troubleshoot issues, start by verifying the power supply and decoupling capacitor values. Check the PCB layout for any signal integrity issues, such as impedance mismatches or signal reflections. Also, ensure that the device is properly terminated and that the input and output signals are within the recommended specifications.