Part Details for AD8008AR by Analog Devices Inc
Results Overview of AD8008AR by Analog Devices Inc
- Distributor Offerings: (2 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (3 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Education and Research
Internet of Things (IoT)
Computing and Data Storage
Aerospace and Defense
Healthcare
Telecommunications
Automotive
AD8008AR Information
AD8008AR by Analog Devices Inc is an Operational Amplifier.
Operational Amplifiers are under the broader part category of Amplifier Circuits.
Amplifier circuits use external power to increase the amplitude of an input signal. They can be used to perform linear amplifications or logarithmic functions. Read more about Amplifier Circuits on our Amplifier Circuits part category page.
Price & Stock for AD8008AR
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Quest Components | IC,OP-AMP,DUAL,BIPOLAR,SOP,8PIN,PLASTIC | 141 |
|
$3.0128 / $6.9525 | Buy Now |
|
|
Rochester Electronics | Operational Amplifier, 1 Func, 4000uV Offset-Max, BIPolar, PDSO8 RoHS: Not Compliant Status: Obsolete Min Qty: 1 | 41804 |
|
$2.6200 / $3.2700 | Buy Now |
Part Details for AD8008AR
AD8008AR CAD Models
AD8008AR Part Data Attributes
|
|
AD8008AR
Analog Devices Inc
Buy Now
Datasheet
|
Compare Parts:
AD8008AR
Analog Devices Inc
OP-AMP, 4000uV OFFSET-MAX, PDSO8, MS-012AA, SOIC-8
|
| Pbfree Code | No | |
| Rohs Code | No | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | ANALOG DEVICES INC | |
| Part Package Code | SOIC | |
| Package Description | MS-012AA, SOIC-8 | |
| Pin Count | 8 | |
| Reach Compliance Code | not_compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.33.00.01 | |
| Samacsys Manufacturer | Analog Devices | |
| Amplifier Type | OPERATIONAL AMPLIFIER | |
| Architecture | CURRENT-FEEDBACK | |
| Bias Current-Max (IIB) @25C | 8 µA | |
| Common-mode Reject Ratio-Nom | 59 dB | |
| Frequency Compensation | YES | |
| Input Offset Voltage-Max | 4000 µV | |
| JESD-30 Code | R-PDSO-G8 | |
| JESD-609 Code | e0 | |
| Length | 4.9 mm | |
| Low-Bias | NO | |
| Low-Offset | NO | |
| Micropower | NO | |
| Moisture Sensitivity Level | 1 | |
| Neg Supply Voltage Limit-Max | -6.3 V | |
| Neg Supply Voltage-Nom (Vsup) | -5 V | |
| Number of Functions | 1 | |
| Number of Terminals | 8 | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | SOP | |
| Package Equivalence Code | SOP8,.25 | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE | |
| Peak Reflow Temperature (Cel) | 240 | |
| Power | NO | |
| Programmable Power | NO | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 1.75 mm | |
| Slew Rate-Min | 665 V/us | |
| Slew Rate-Nom | 1000 V/us | |
| Supply Current-Max | 20.4 mA | |
| Supply Voltage Limit-Max | 6.3 V | |
| Supply Voltage-Nom (Vsup) | 5 V | |
| Surface Mount | YES | |
| Technology | BIPOLAR | |
| Temperature Grade | INDUSTRIAL | |
| Terminal Finish | TIN LEAD | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 1.27 mm | |
| Terminal Position | DUAL | |
| Wideband | YES | |
| Width | 3.9 mm |
Alternate Parts for AD8008AR
This table gives cross-reference parts and alternative options found for AD8008AR. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of AD8008AR, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| AD8008ARZ | Analog Devices Inc | $4.9901 | Ultralow Distortion, High Speed Amplifiers | AD8008AR vs AD8008ARZ |
| AD8008AR-REEL7 | Analog Devices Inc | Check for Price | OP-AMP, 4000uV OFFSET-MAX, PDSO8, MS-012AA, SOIC-8 | AD8008AR vs AD8008AR-REEL7 |
| AD8008ARZ-REEL7 | Analog Devices Inc | Check for Price | Ultralow Distortion, High Speed Amplifiers | AD8008AR vs AD8008ARZ-REEL7 |
AD8008AR Frequently Asked Questions (FAQ)
-
To minimize noise and maximize performance, it is recommended to follow good PCB layout practices, such as keeping the input and output traces short and away from each other, using a solid ground plane, and decoupling the power supplies with capacitors. Additionally, it is recommended to use a symmetrical layout and to keep the sensitive analog signals away from digital signals.
-
The choice of gain resistors depends on the desired gain, bandwidth, and noise requirements of the application. A good starting point is to use the gain resistor values recommended in the datasheet, and then adjust them based on the specific requirements of the application. It is also important to consider the tolerance and temperature coefficient of the resistors to ensure stable operation over temperature.
-
The AD8008AR can drive capacitive loads up to 100 pF, but it is recommended to limit the capacitive load to 10 pF or less to ensure stable operation. Excessive capacitive loading can cause oscillation or instability in the amplifier.
-
The input bias current of the AD8008AR can be compensated for by adding a resistor in series with the input signal, with a value equal to the parallel combination of the input resistors. This helps to cancel out the effect of the input bias current and ensures accurate signal amplification.
-
A good power supply decoupling scheme for the AD8008AR involves using a combination of ceramic and electrolytic capacitors to filter out high-frequency noise and ripple. A 10 uF ceramic capacitor in parallel with a 10 uF electrolytic capacitor is a good starting point, with the capacitors placed as close as possible to the power supply pins of the op-amp.