Part Details for AD7656YSTZ-1-RL by Analog Devices Inc
Results Overview of AD7656YSTZ-1-RL by Analog Devices Inc
- Distributor Offerings: (1 listing)
- Number of FFF Equivalents: (1 replacement)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Education and Research
Environmental Monitoring
Internet of Things (IoT)
Industrial Automation
Computing and Data Storage
Aerospace and Defense
Healthcare
Agriculture Technology
Medical Imaging
Electronic Manufacturing
Telecommunications
Automotive
AD7656YSTZ-1-RL Information
AD7656YSTZ-1-RL by Analog Devices Inc is an Analog to Digital Converter.
Analog to Digital Converters are under the broader part category of Converters.
A converter is an electrical circuit that transforms electric energy into a different form that will support a elecrical load needed by a device. Read more about Converters on our Converters part category page.
Price & Stock for AD7656YSTZ-1-RL
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Vyrian | Converters | 961 |
|
RFQ |
Part Details for AD7656YSTZ-1-RL
AD7656YSTZ-1-RL CAD Models
AD7656YSTZ-1-RL Part Data Attributes
|
|
AD7656YSTZ-1-RL
Analog Devices Inc
Buy Now
Datasheet
|
Compare Parts:
AD7656YSTZ-1-RL
Analog Devices Inc
250 kSPS, 6-Channel, Simultaneous Sampling, Bipolar 16-Bit ADC
|
| Pbfree Code | No | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | ANALOG DEVICES INC | |
| Part Package Code | QFP | |
| Package Description | ROHS COMPLIANT, MS-026BCD, LQFP-64 | |
| Pin Count | 64 | |
| Manufacturer Package Code | ST-64-2 | |
| Reach Compliance Code | unknown | |
| HTS Code | 8542.39.00.01 | |
| Analog Input Voltage-Max | 10 V | |
| Analog Input Voltage-Min | -10 V | |
| Conversion Time-Max | 3.1 µs | |
| Converter Type | ADC, SUCCESSIVE APPROXIMATION | |
| JESD-30 Code | S-PQFP-G64 | |
| JESD-609 Code | e3 | |
| Length | 10 mm | |
| Linearity Error-Max (EL) | 0.0046% | |
| Moisture Sensitivity Level | 3 | |
| Number of Analog In Channels | 6 | |
| Number of Bits | 16 | |
| Number of Functions | 1 | |
| Number of Terminals | 64 | |
| Operating Temperature-Max | 125 °C | |
| Operating Temperature-Min | -40 °C | |
| Output Bit Code | 2'S COMPLEMENT BINARY | |
| Output Format | SERIAL, PARALLEL, WORD | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | LFQFP | |
| Package Equivalence Code | QFP64,.47SQ,20 | |
| Package Shape | SQUARE | |
| Package Style | FLATPACK, LOW PROFILE, FINE PITCH | |
| Peak Reflow Temperature (Cel) | 260 | |
| Qualification Status | Not Qualified | |
| Sample Rate | 0.25 MHz | |
| Sample and Hold / Track and Hold | TRACK | |
| Seated Height-Max | 1.6 mm | |
| Supply Voltage-Nom | 5 V | |
| Surface Mount | YES | |
| Technology | BICMOS | |
| Temperature Grade | AUTOMOTIVE | |
| Terminal Finish | Matte Tin (Sn) - annealed | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 0.5 mm | |
| Terminal Position | QUAD | |
| Width | 10 mm |
Alternate Parts for AD7656YSTZ-1-RL
This table gives cross-reference parts and alternative options found for AD7656YSTZ-1-RL. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of AD7656YSTZ-1-RL, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| AD7656BSTZ-1 | Analog Devices Inc | $24.4376 | 250 kSPS, 6-Channel, Simultaneous Sampling, Bipolar 16-Bit ADC | AD7656YSTZ-1-RL vs AD7656BSTZ-1 |
AD7656YSTZ-1-RL Frequently Asked Questions (FAQ)
-
The recommended layout and routing for the AD7656YSTZ-1-RL can be found in the AD7656 Evaluation Board documentation and the AD7656 Layout and Routing Guidelines document, both available on the Analog Devices website. These resources provide detailed guidance on how to optimize the PCB layout and routing for optimal performance.
-
The AD7656YSTZ-1-RL does not require calibration. It is a self-calibrating ADC that performs a self-calibration sequence at power-up. However, if you need to perform a system-level calibration, you can use the ADC's built-in calibration registers to adjust the offset and gain of the device.
-
The maximum sampling rate of the AD7656YSTZ-1-RL is 250 kSPS. However, the actual sampling rate may be limited by the system's clock frequency, the ADC's conversion time, and the interface mode used.
-
Yes, the AD7656YSTZ-1-RL can operate with a 3.3V supply voltage. However, the device's performance may be affected, and the maximum sampling rate may be reduced. It is recommended to use a 5V supply voltage for optimal performance.
-
The AD7656YSTZ-1-RL can be interfaced with a microcontroller using a serial interface, such as SPI or I2C. The device's datasheet provides detailed information on the interface timing and protocol. You can also use the AD7656 Evaluation Board and the accompanying software to simplify the interface development process.