Part Details for AD7510DIJNZ by Analog Devices Inc
Results Overview of AD7510DIJNZ by Analog Devices Inc
- Distributor Offerings: (3 listings)
- Number of FFF Equivalents: (2 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Education and Research
Environmental Monitoring
Internet of Things (IoT)
Industrial Automation
Computing and Data Storage
Aerospace and Defense
Healthcare
Agriculture Technology
Medical Imaging
Telecommunications
Automotive
AD7510DIJNZ Information
AD7510DIJNZ by Analog Devices Inc is a Multiplexer or Switch.
Multiplexers or Switches are under the broader part category of Signal Circuits.
A signal is an electronic means of transmitting information, either as an analog signal with continuous values or a digital signal with discrete values. Signals are used in various systems and networks. Read more about Signal Circuits on our Signal Circuits part category page.
Price & Stock for AD7510DIJNZ
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
ComSIT USA | Electronic Component RoHS: Compliant |
|
|
RFQ | |
|
|
Chip 1 Exchange | INSTOCK | 1 |
|
RFQ | |
|
|
Vyrian | Other Function Semiconductors | 306 |
|
RFQ |
Part Details for AD7510DIJNZ
AD7510DIJNZ CAD Models
AD7510DIJNZ Part Data Attributes
|
|
AD7510DIJNZ
Analog Devices Inc
Buy Now
Datasheet
|
Compare Parts:
AD7510DIJNZ
Analog Devices Inc
IC QUAD 1-CHANNEL, SGL POLE SGL THROW SWITCH, PDIP16, PLASTIC, DIP-16, Multiplexer or Switch
|
| Pbfree Code | Yes | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | ANALOG DEVICES INC | |
| Part Package Code | DIP | |
| Package Description | PLASTIC, DIP-16 | |
| Pin Count | 16 | |
| Reach Compliance Code | unknown | |
| HTS Code | 8542.39.00.01 | |
| Samacsys Manufacturer | Analog Devices | |
| Additional Feature | OVERVOLTAGE PROTECTION | |
| Analog IC - Other Type | SPST | |
| JESD-30 Code | R-PDIP-T16 | |
| JESD-609 Code | e3 | |
| Length | 19.05 mm | |
| Neg Supply Voltage-Nom (Vsup) | -15 V | |
| Normal Position | NO | |
| Number of Channels | 1 | |
| Number of Functions | 4 | |
| Number of Terminals | 16 | |
| On-state Resistance Match-Nom | 1 Ω | |
| On-state Resistance-Max (Ron) | 100 Ω | |
| Operating Temperature-Max | 70 °C | |
| Operating Temperature-Min | ||
| Output | SEPARATE OUTPUT | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | DIP | |
| Package Equivalence Code | DIP16,.3 | |
| Package Shape | RECTANGULAR | |
| Package Style | IN-LINE | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 5.33 mm | |
| Supply Current-Max (Isup) | 0.8 mA | |
| Supply Voltage-Nom (Vsup) | 15 V | |
| Surface Mount | NO | |
| Technology | CMOS | |
| Temperature Grade | COMMERCIAL | |
| Terminal Finish | Matte Tin (Sn) - annealed | |
| Terminal Form | THROUGH-HOLE | |
| Terminal Pitch | 2.54 mm | |
| Terminal Position | DUAL | |
| Width | 7.62 mm |
Alternate Parts for AD7510DIJNZ
This table gives cross-reference parts and alternative options found for AD7510DIJNZ. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of AD7510DIJNZ, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| AD7510DISQ | Rochester Electronics LLC | Check for Price | QUAD 1-CHANNEL, SGL POLE SGL THROW SWITCH, CDIP16, CERDIP-16 | AD7510DIJNZ vs AD7510DISQ |
| AD7510DIJQ | Rochester Electronics LLC | Check for Price | QUAD 1-CHANNEL, SGL POLE SGL THROW SWITCH, CDIP16, HERMETIC SEALED, CERDIP-16 | AD7510DIJNZ vs AD7510DIJQ |
AD7510DIJNZ Frequently Asked Questions (FAQ)
-
A good PCB layout for the AD7510DIJNZ involves keeping the analog and digital grounds separate, using a solid ground plane, and minimizing noise coupling by keeping sensitive analog signals away from digital signals. A 4-layer PCB with a dedicated analog ground plane is recommended.
-
To ensure accurate temperature measurement, calibrate the AD7510DIJNZ using a thermocouple simulator or a precision temperature source. Also, ensure proper thermocouple connection, and use a cold junction compensation (CJC) sensor if necessary. Additionally, consider using a thermocouple with a high accuracy rating.
-
The maximum cable length for the AD7510DIJNZ's thermocouple input depends on the type of thermocouple and the noise environment. As a general guideline, keep the cable length as short as possible (less than 10 feet) to minimize noise pickup and ensure accurate measurements.
-
While the AD7510DIJNZ is optimized for K-type thermocouples, it can be used with other thermocouple types (e.g., J, T, E, N) with some limitations. However, the accuracy and temperature range may be affected. Consult the datasheet and application notes for specific guidance on using non-standard thermocouples.
-
To minimize EMI effects, use a shielded cable for the thermocouple connection, and ensure the AD7510DIJNZ is placed in a shielded enclosure. Additionally, use a common-mode filter or a ferrite bead on the thermocouple wires to reduce EMI susceptibility.