Part Details for AD648JN by Analog Devices Inc
Results Overview of AD648JN by Analog Devices Inc
- Distributor Offerings: (6 listings)
- Number of FFF Equivalents: (1 replacement)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (1 option)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
AD648JN Information
AD648JN by Analog Devices Inc is an Operational Amplifier.
Operational Amplifiers are under the broader part category of Amplifier Circuits.
Amplifier circuits use external power to increase the amplitude of an input signal. They can be used to perform linear amplifications or logarithmic functions. Read more about Amplifier Circuits on our Amplifier Circuits part category page.
Price & Stock for AD648JN
Part # | Distributor | Description | Stock | Price | Buy | |
---|---|---|---|---|---|---|
|
Quest Components | DUAL OP-AMP, 3000 UV OFFSET-MAX, 1 MHZ BAND WIDTH, PDIP8 | 80 |
|
$3.4225 / $5.5500 | Buy Now |
|
Quest Components | DUAL OP-AMP, 3000 UV OFFSET-MAX, 1 MHZ BAND WIDTH, PDIP8 | 33 |
|
$4.2000 / $6.3000 | Buy Now |
|
Quest Components | DUAL OP-AMP, 3000 UV OFFSET-MAX, 1 MHZ BAND WIDTH, PDIP8 | 17 |
|
$2.4300 / $4.8600 | Buy Now |
|
Quest Components | DUAL OP-AMP, 3000 UV OFFSET-MAX, 1 MHZ BAND WIDTH, PDIP8 | 10 |
|
$2.7750 / $5.5500 | Buy Now |
|
ComSIT USA | DUAL PRECISION, LOW POWER BIFET OP AMP Operational Amplifier, 2 Func, 3000uV Offset-Max, BIPolar, PDIP8 ECCN: EAR99 RoHS: Not Compliant |
|
|
RFQ | |
|
Vyrian | Peripheral ICs | 1594 |
|
RFQ |
Part Details for AD648JN
AD648JN CAD Models
AD648JN Part Data Attributes
|
AD648JN
Analog Devices Inc
Buy Now
Datasheet
|
Compare Parts:
AD648JN
Analog Devices Inc
IC DUAL OP-AMP, 3000 uV OFFSET-MAX, 1 MHz BAND WIDTH, PDIP8, MINI, PLASTIC, DIP-8, Operational Amplifier
|
Rohs Code | No | |
Part Life Cycle Code | Obsolete | |
Ihs Manufacturer | ANALOG DEVICES INC | |
Part Package Code | DIP | |
Package Description | MINI, PLASTIC, DIP-8 | |
Pin Count | 8 | |
Reach Compliance Code | not_compliant | |
ECCN Code | EAR99 | |
HTS Code | 8542.33.00.01 | |
Samacsys Manufacturer | Analog Devices | |
Amplifier Type | OPERATIONAL AMPLIFIER | |
Architecture | VOLTAGE-FEEDBACK | |
Average Bias Current-Max (IIB) | 0.00002 µA | |
Common-mode Reject Ratio-Min | 70 dB | |
Common-mode Reject Ratio-Nom | 70 dB | |
Frequency Compensation | YES | |
Input Offset Voltage-Max | 3000 µV | |
JESD-30 Code | R-PDIP-T8 | |
JESD-609 Code | e0 | |
Low-Bias | YES | |
Low-Offset | NO | |
Micropower | YES | |
Neg Supply Voltage Limit-Max | -18 V | |
Neg Supply Voltage-Nom (Vsup) | -15 V | |
Number of Functions | 2 | |
Number of Terminals | 8 | |
Operating Temperature-Max | 70 °C | |
Operating Temperature-Min | ||
Package Body Material | PLASTIC/EPOXY | |
Package Code | DIP | |
Package Equivalence Code | DIP8,.3 | |
Package Shape | RECTANGULAR | |
Package Style | IN-LINE | |
Qualification Status | Not Qualified | |
Seated Height-Max | 4.44 mm | |
Slew Rate-Min | 1 V/us | |
Slew Rate-Nom | 1.8 V/us | |
Supply Current-Max | 0.4 mA | |
Supply Voltage Limit-Max | 18 V | |
Supply Voltage-Nom (Vsup) | 15 V | |
Surface Mount | NO | |
Technology | BIPOLAR | |
Temperature Grade | COMMERCIAL | |
Terminal Finish | TIN LEAD | |
Terminal Form | THROUGH-HOLE | |
Terminal Pitch | 2.54 mm | |
Terminal Position | DUAL | |
Unity Gain BW-Nom | 1000 | |
Voltage Gain-Min | 150000 | |
Width | 7.62 mm |
Alternate Parts for AD648JN
This table gives cross-reference parts and alternative options found for AD648JN. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of AD648JN, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
Part Number | Manufacturer | Composite Price | Description | Compare |
---|---|---|---|---|
AD648JNZ | Rochester Electronics LLC | Check for Price | DUAL OP-AMP, 3000 uV OFFSET-MAX, 1 MHz BAND WIDTH, PDIP8, MINI, PLASTIC, DIP-8 | AD648JN vs AD648JNZ |
AD648JN Frequently Asked Questions (FAQ)
-
It's essential to follow a star-grounding scheme, keep the input and output traces separate, and place the device close to the analog-to-digital converter (ADC) or digital-to-analog converter (DAC) to minimize noise. Additionally, use a solid ground plane and avoid running digital traces near the analog signals.
-
The AD648JN's output voltage swing can be limited by the load's impedance. To handle this, use a voltage follower or a buffer amplifier to isolate the load from the output. Failure to do so can result in reduced output swing, distortion, and potential oscillations.
-
The AD648JN has a maximum junction temperature of 150°C. Ensure good thermal conductivity by using a heat sink, thermal interface material, and a PCB design that allows for adequate airflow. Also, follow the recommended operating conditions and derate the device's power dissipation accordingly.
-
Use a combination of visual inspection, signal analysis, and debugging techniques. Check for proper power supply decoupling, ensure the device is properly terminated, and verify the input and output signals using an oscilloscope. Also, consult the datasheet and application notes for guidance on troubleshooting common issues.
-
Use proper shielding, grounding, and layout techniques to minimize EMI and RFI. Ensure the device is placed in a shielded enclosure, use twisted pair or shielded cables, and follow good PCB design practices. Additionally, consider using EMI filters or common-mode chokes to reduce electromagnetic radiation.