Part Details for AD510JH by Analog Devices Inc
Results Overview of AD510JH by Analog Devices Inc
- Distributor Offerings: (2 listings)
- Number of FFF Equivalents: (1 replacement)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (0 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Education and Research
Internet of Things (IoT)
Computing and Data Storage
Aerospace and Defense
Healthcare
Telecommunications
Automotive
AD510JH Information
AD510JH by Analog Devices Inc is an Operational Amplifier.
Operational Amplifiers are under the broader part category of Amplifier Circuits.
Amplifier circuits use external power to increase the amplitude of an input signal. They can be used to perform linear amplifications or logarithmic functions. Read more about Amplifier Circuits on our Amplifier Circuits part category page.
Price & Stock for AD510JH
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
2156-AD510JH-ND
|
DigiKey | IC OPAMP GP 1 CIRCUIT TO99-8 Min Qty: 22 Lead time: 1 Weeks Container: Bulk MARKETPLACE PRODUCT |
7621 In Stock |
|
$14.0600 | Buy Now |
|
|
Rochester Electronics | Laser Trimmed, Precision Operational Amplifier RoHS: Not Compliant Status: Obsolete Min Qty: 1 | 7621 |
|
$10.8200 / $13.5200 | Buy Now |
Part Details for AD510JH
AD510JH CAD Models
AD510JH Part Data Attributes
|
|
AD510JH
Analog Devices Inc
Buy Now
Datasheet
|
Compare Parts:
AD510JH
Analog Devices Inc
IC OP-AMP, 100 uV OFFSET-MAX, 0.3 MHz BAND WIDTH, MBCY8, HERMETIC SEALED, METAL CAN, TO-99, 8 PIN, Operational Amplifier
|
| Rohs Code | No | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | ANALOG DEVICES INC | |
| Part Package Code | TO-99 | |
| Package Description | HERMETIC SEALED, METAL CAN, TO-99, 8 PIN | |
| Pin Count | 8 | |
| Reach Compliance Code | unknown | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.31.00.01 | |
| Amplifier Type | OPERATIONAL AMPLIFIER | |
| Architecture | VOLTAGE-FEEDBACK | |
| Average Bias Current-Max (IIB) | 0.04 µA | |
| Bias Current-Max (IIB) @25C | 0.025 µA | |
| Common-mode Reject Ratio-Nom | 94 dB | |
| Frequency Compensation | YES | |
| Input Offset Voltage-Max | 100 µV | |
| JESD-30 Code | O-MBCY-W8 | |
| JESD-609 Code | e0 | |
| Low-Offset | YES | |
| Neg Supply Voltage Limit-Max | -18 V | |
| Neg Supply Voltage-Nom (Vsup) | -15 V | |
| Number of Functions | 1 | |
| Number of Terminals | 8 | |
| Operating Temperature-Max | 70 °C | |
| Operating Temperature-Min | ||
| Package Body Material | METAL | |
| Package Code | TO-99 | |
| Package Equivalence Code | CAN8,.2 | |
| Package Shape | ROUND | |
| Package Style | CYLINDRICAL | |
| Qualification Status | Not Qualified | |
| Slew Rate-Nom | 0.1 V/us | |
| Supply Current-Max | 4 mA | |
| Supply Voltage Limit-Max | 18 V | |
| Supply Voltage-Nom (Vsup) | 15 V | |
| Surface Mount | NO | |
| Technology | BIPOLAR | |
| Temperature Grade | COMMERCIAL | |
| Terminal Finish | TIN LEAD | |
| Terminal Form | WIRE | |
| Terminal Position | BOTTOM | |
| Unity Gain BW-Nom | 300 | |
| Voltage Gain-Min | 125000 |
Alternate Parts for AD510JH
This table gives cross-reference parts and alternative options found for AD510JH. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of AD510JH, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| 5962-01-140-1640 | Analog Devices Inc | Check for Price | IC IC,OP-AMP,SINGLE,BIPOLAR,CAN,8PIN,METAL, Operational Amplifier | AD510JH vs 5962-01-140-1640 |
AD510JH Frequently Asked Questions (FAQ)
-
The AD510JH is a high-precision device, and its performance can be affected by the PCB layout and placement. It is recommended to follow a star-grounding scheme, keep the analog and digital grounds separate, and place the device close to the analog signal sources. Additionally, it is recommended to use a solid ground plane and to avoid running digital signals near the analog signals.
-
To ensure accuracy and stability, it is recommended to use a high-quality voltage reference, such as the ADR4520, and to follow proper calibration and trimming procedures. Additionally, the device should be operated within its specified temperature range, and the PCB should be designed to minimize thermal gradients. Regular calibration and maintenance can also help to ensure accuracy and stability over time.
-
The AD510JH has a limited output current of ±5 mA, and the output voltage swing is limited to ±10 V. These limitations should be taken into account when designing the circuit, and external amplifiers or buffers may be required to drive heavy loads or achieve higher output voltages.
-
The AD510JH has a parallel interface that can be easily interfaced with a microcontroller or digital signal processor. The device requires a 5 V supply, and the digital inputs should be driven with a 5 V logic level. The interface timing and protocol should be followed as specified in the datasheet, and the device should be properly reset and initialized before use.
-
The AD510JH is a high-frequency device, and it can be susceptible to EMI and RFI. To minimize their impact, it is recommended to use a shielded enclosure, keep the device away from high-frequency sources, and use proper filtering and shielding techniques. Additionally, the PCB should be designed to minimize radiation and susceptibility, and the device should be operated within its specified frequency range.