Part Details for W25Q32JVSSIQTR by Winbond Electronics Corp
Results Overview of W25Q32JVSSIQTR by Winbond Electronics Corp
- Distributor Offerings: (0 listings)
- Number of FFF Equivalents: (2 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (5 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
W25Q32JVSSIQTR Information
W25Q32JVSSIQTR by Winbond Electronics Corp is a Flash Memory.
Flash Memories are under the broader part category of Memory Components.
Memory components are essential in electronics for computer processing. They can be volatile or non-volatile, depending on the desired function. Read more about Memory Components on our Memory part category page.
Part Details for W25Q32JVSSIQTR
W25Q32JVSSIQTR CAD Models
W25Q32JVSSIQTR Part Data Attributes
|
|
W25Q32JVSSIQTR
Winbond Electronics Corp
Buy Now
Datasheet
|
Compare Parts:
W25Q32JVSSIQTR
Winbond Electronics Corp
Flash, 4MX8, PDSO8, SOIC-8
|
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | WINBOND ELECTRONICS CORP | |
| Package Description | SOIC-8 | |
| Reach Compliance Code | compliant | |
| ECCN Code | 3A991.B.1.A | |
| HTS Code | 8542.32.00.51 | |
| Samacsys Manufacturer | Winbond | |
| Clock Frequency-Max (fCLK) | 133 MHz | |
| Endurance | 100000 Write/Erase Cycles | |
| JESD-30 Code | S-PDSO-G8 | |
| JESD-609 Code | e3 | |
| Length | 5.28 mm | |
| Memory Density | 33554432 bit | |
| Memory IC Type | FLASH | |
| Memory Width | 8 | |
| Number of Functions | 1 | |
| Number of Terminals | 8 | |
| Number of Words | 4194304 words | |
| Number of Words Code | 4000000 | |
| Operating Mode | SYNCHRONOUS | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| Organization | 4MX8 | |
| Output Characteristics | 3-STATE | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | SOP | |
| Package Equivalence Code | SOP8,.3 | |
| Package Shape | SQUARE | |
| Package Style | SMALL OUTLINE | |
| Parallel/Serial | SERIAL | |
| Peak Reflow Temperature (Cel) | 260 | |
| Programming Voltage | 3 V | |
| Seated Height-Max | 2.16 mm | |
| Serial Bus Type | QSPI | |
| Supply Voltage-Max (Vsup) | 3.6 V | |
| Supply Voltage-Min (Vsup) | 2.7 V | |
| Supply Voltage-Nom (Vsup) | 3 V | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Temperature Grade | INDUSTRIAL | |
| Terminal Finish | MATTE TIN | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 1.27 mm | |
| Terminal Position | DUAL | |
| Type | NOR TYPE | |
| Width | 5.28 mm | |
| Write Protection | HARDWARE/SOFTWARE |
Alternate Parts for W25Q32JVSSIQTR
This table gives cross-reference parts and alternative options found for W25Q32JVSSIQTR. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of W25Q32JVSSIQTR, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| W25Q32JVSSJM | Winbond Electronics Corp | Check for Price | Flash, | W25Q32JVSSIQTR vs W25Q32JVSSJM |
| W25Q32JVSSIQ | Winbond Electronics Corp | Check for Price | Flash, 4MX8, PDSO8, SOIC-8 | W25Q32JVSSIQTR vs W25Q32JVSSIQ |
W25Q32JVSSIQTR Frequently Asked Questions (FAQ)
-
The W25Q32JVSSIQTR supports up to 100,000 erase cycles.
-
The hold pin (HOLD#) is used to pause the serial flash memory during a read or write operation. To use it, pull the HOLD# pin low to pause the operation, and pull it high to resume the operation.
-
The recommended power-up sequence is to apply VCC first, followed by VPP (if used), and then the clock signal (SCK).
-
The optimal clock frequency depends on the specific application and system requirements. The W25Q32JVSSIQTR supports clock frequencies up to 104 MHz, but you should consider factors like power consumption, noise tolerance, and system latency when selecting the clock frequency.
-
The WP# pin is the write-protect pin, which is used to prevent accidental writes to the flash memory. To use it, pull the WP# pin low to enable write protection, and pull it high to disable write protection.