-
Part Symbol
-
Footprint
-
3D Model
Available Download Formats
By downloading CAD models, you agree to our Terms & Conditions and Privacy Policy
Part Details for TS110-7UF by STMicroelectronics
Results Overview of TS110-7UF by STMicroelectronics
- Distributor Offerings: (7 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Available)
- Number of Functional Equivalents: (0 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
TS110-7UF Information
TS110-7UF by STMicroelectronics is a Silicon Controlled Rectifier.
Silicon Controlled Rectifiers are under the broader part category of Trigger Devices.
Trigger devices initiate or control actions in electronic circuits by producing output signals when specific input conditions are met. They are commonly used in timing circuits and pulse generators. Read more about Trigger Devices on our Trigger Devices part category page.
Price & Stock for TS110-7UF
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
497-13406-1-ND
|
DigiKey | SCR 700V 1.25A SMBFLAT-3L Min Qty: 1 Lead time: 45 Weeks Container: Digi-Reel®, Cut Tape (CT), Tape & Reel (TR) |
3655 In Stock |
|
$0.3713 / $1.5600 | Buy Now |
|
DISTI #
TS110-7UF
|
Avnet Americas | - Tape and Reel (Alt: TS110-7UF) RoHS: Compliant Min Qty: 5000 Package Multiple: 5000 Lead time: 45 Weeks, 0 Days Container: Reel | 0 |
|
$0.3536 / $0.3760 | Buy Now |
|
DISTI #
511-TS110-7UF
|
Mouser Electronics | SCRs 700V High Surge 1.25A SCR 100uA RoHS: Compliant | 490 |
|
$0.3890 / $1.5400 | Buy Now |
|
|
STMicroelectronics | High surge voltage 1.25 A SCR for circuit breaker COO: Morocco RoHS: Compliant Min Qty: 1 | 490 |
|
$0.5100 / $1.5100 | Buy Now |
|
DISTI #
TS110-7UF
|
TME | Thyristor, 700V, Ifmax: 1.25A, 0.8A, Igt: 100uA, SMBflat-3L, SMD Min Qty: 1 | 0 |
|
$0.3280 / $0.7180 | RFQ |
|
DISTI #
TS110-7UF
|
Avnet Silica | (Alt: TS110-7UF) RoHS: Compliant Min Qty: 5000 Package Multiple: 5000 Lead time: 17 Weeks, 0 Days | Silica - 0 |
|
Buy Now | |
|
DISTI #
TS110-7UF
|
EBV Elektronik | (Alt: TS110-7UF) RoHS: Compliant Min Qty: 5000 Package Multiple: 5000 Lead time: 46 Weeks, 0 Days | EBV - 0 |
|
Buy Now |
Part Details for TS110-7UF
TS110-7UF CAD Models
TS110-7UF Part Data Attributes
|
|
TS110-7UF
STMicroelectronics
Buy Now
Datasheet
|
Compare Parts:
TS110-7UF
STMicroelectronics
High surge voltage 1.25 A SCR for circuit breaker
|
| Rohs Code | Yes | |
| Part Life Cycle Code | Not Recommended | |
| Ihs Manufacturer | STMICROELECTRONICS | |
| Reach Compliance Code | not_compliant | |
| ECCN Code | EAR99 | |
| Factory Lead Time | 45 Weeks | |
| Samacsys Manufacturer | STMicroelectronics | |
| Critical Rate of Rise of Off-State Voltage-Min | 15 V/us | |
| DC Gate Trigger Current-Max | 0.001 mA | |
| DC Gate Trigger Voltage-Max | 0.8 V | |
| Holding Current-Max | 2 mA | |
| JESD-609 Code | e3 | |
| Leakage Current-Max | 0.1 mA | |
| Moisture Sensitivity Level | 3 | |
| Non-Repetitive Pk On-state Cur | 25 A | |
| On-state Current-Max | 800 A | |
| Operating Temperature-Max | 125 °C | |
| Operating Temperature-Min | -40 °C | |
| Peak Reflow Temperature (Cel) | 225 | |
| Repetitive Peak Off-state Voltage | 700 V | |
| Surface Mount | YES | |
| Terminal Finish | Matte Tin (Sn) - annealed | |
| Time@Peak Reflow Temperature-Max (s) | 30 | |
| Trigger Device Type | SCR |
TS110-7UF Frequently Asked Questions (FAQ)
-
The recommended operating temperature range for the TS110-7UF is -40°C to 125°C.
-
The TS110-7UF requires a single 3.3V or 5V power supply, and it's recommended to use a decoupling capacitor of 10nF to 100nF between VCC and GND to ensure stable operation.
-
The TS110-7UF has a maximum data transfer rate of 100 Mbps.
-
Yes, the TS110-7UF is designed to support hot-swapping, but it's recommended to follow proper hot-swap procedures to avoid damage to the device.
-
The TS110-7UF has built-in ESD protection, but it's still recommended to follow proper ESD handling procedures when handling the device to prevent damage.