Part Details for TLV74133PDQNR by Texas Instruments
Results Overview of TLV74133PDQNR by Texas Instruments
- Distributor Offerings: (2 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Education and Research
Industrial Automation
Electronic Manufacturing
TLV74133PDQNR Information
TLV74133PDQNR by Texas Instruments is a Linear Regulator IC.
Linear Regulator ICs are under the broader part category of Power Circuits.
A power circuit delivers electricity in order to operate a load for an electronic device. Power circuits include transformers, generators and switches. Read more about Power Circuits on our Power Circuits part category page.
Price & Stock for TLV74133PDQNR
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
296-51755-1-ND
|
DigiKey | IC REG LINEAR 3.3V 150MA 4-X2SON Min Qty: 1 Lead time: 12 Weeks Container: Digi-Reel®, Cut Tape (CT), Tape & Reel (TR) |
5666 In Stock |
|
$0.0288 / $0.1000 | Buy Now |
|
DISTI #
595-TLV74133PDQNR
|
Mouser Electronics | LDO Voltage Regulators 150-mA low-dropout ( LDO) voltage regulat RoHS: Compliant | 7826 |
|
$0.0300 / $0.1000 | Buy Now |
Part Details for TLV74133PDQNR
TLV74133PDQNR CAD Models
TLV74133PDQNR Part Data Attributes
|
|
TLV74133PDQNR
Texas Instruments
Buy Now
Datasheet
|
Compare Parts:
TLV74133PDQNR
Texas Instruments
150-mA low-dropout (LDO) voltage regulator with active output discharge and enable 4-X2SON -40 to 125
|
| Pbfree Code | Yes | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | TEXAS INSTRUMENTS INC | |
| Package Description | X2SON-4 | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 | |
| Samacsys Manufacturer | Texas Instruments | |
| Adjustability | FIXED | |
| Dropout Voltage1-Max | 0.54 V | |
| Dropout Voltage1-Nom | 0.23 V | |
| Input Voltage-Max | 5.5 V | |
| Input Voltage-Min | 3.8 V | |
| JESD-30 Code | S-PDSO-N4 | |
| JESD-609 Code | e4 | |
| Length | 1 mm | |
| Load Regulation-Max | 0.03% | |
| Moisture Sensitivity Level | 1 | |
| Number of Functions | 1 | |
| Number of Outputs | 1 | |
| Number of Terminals | 4 | |
| Operating Temperature TJ-Max | 125 °C | |
| Operating Temperature TJ-Min | -40 °C | |
| Output Current1-Max | 0.15 A | |
| Output Voltage1-Max | 3.3495 V | |
| Output Voltage1-Min | 3.2505 V | |
| Output Voltage1-Nom | 3.3 V | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | VSON | |
| Package Shape | SQUARE | |
| Package Style | SMALL OUTLINE, VERY THIN PROFILE | |
| Peak Reflow Temperature (Cel) | 260 | |
| Regulator Type | FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR | |
| Seated Height-Max | 0.4 mm | |
| Surface Mount | YES | |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) | |
| Terminal Form | NO LEAD | |
| Terminal Pitch | 0.65 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 30 | |
| Voltage Tolerance-Max | 1.5% | |
| Width | 1 mm |
Alternate Parts for TLV74133PDQNR
This table gives cross-reference parts and alternative options found for TLV74133PDQNR. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of TLV74133PDQNR, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| MCP1811BT-033/LT | Microchip Technology Inc | Check for Price | Fixed Positive LDO Regulator | TLV74133PDQNR vs MCP1811BT-033/LT |
| NCP4587DMX31TCG | onsemi | Check for Price | Linear Voltage Regulator, LDO, 150 mA, with Auto Low Power Mode 3.1V, XDFN6 1.2x1.2, 0.4P, 5000-REEL | TLV74133PDQNR vs NCP4587DMX31TCG |
| MCP1811ATT-033/LT | Microchip Technology Inc | Check for Price | Fixed Positive LDO Regulator | TLV74133PDQNR vs MCP1811ATT-033/LT |
| MCP1711-33I/OT | Microchip Technology Inc | Check for Price | FIXED POSITIVE LDO REGULATOR | TLV74133PDQNR vs MCP1711-33I/OT |
| MCP1811A-033/HCA | Microchip Technology Inc | Check for Price | Fixed Positive LDO Regulator | TLV74133PDQNR vs MCP1811A-033/HCA |
| MCP1811B-033/TT | Microchip Technology Inc | Check for Price | Fixed Positive LDO Regulator | TLV74133PDQNR vs MCP1811B-033/TT |
| NCP4587DSN33T1G | onsemi | Check for Price | Linear Voltage Regulator, LDO, 150 mA, with Auto Low Power Mode Auto-discharge, 3.3 V, SOT-23 5 LEAD, 3000-REEL | TLV74133PDQNR vs NCP4587DSN33T1G |
| MCP1811A-033/LT | Microchip Technology Inc | Check for Price | Fixed Positive LDO Regulator | TLV74133PDQNR vs MCP1811A-033/LT |
| MCP1811ATT-033/LB | Microchip Technology Inc | Check for Price | Fixed Positive LDO Regulator | TLV74133PDQNR vs MCP1811ATT-033/LB |
| MCP1811AT-033/LB | Microchip Technology Inc | Check for Price | Fixed Positive LDO Regulator | TLV74133PDQNR vs MCP1811AT-033/LB |
TLV74133PDQNR Frequently Asked Questions (FAQ)
-
The maximum input voltage that can be applied to the TLV74133PDQNR is 18V. Exceeding this voltage may cause damage to the device.
-
To ensure stability, it is recommended to use a minimum output capacitance of 10uF and a maximum ESR of 1 ohm. Additionally, the input capacitor should be at least 1uF with an ESR of 0.1 ohm or less.
-
The minimum input voltage required for the TLV74133PDQNR to operate is 2.7V. However, the device can operate down to 2.3V with reduced performance.
-
Yes, the TLV74133PDQNR is rated for operation up to 125°C. However, the device's performance may degrade at high temperatures, and the output voltage may drop.
-
The output voltage of the TLV74133PDQNR can be calculated using the formula: Vout = (R1/R2) * (Vin - Vref), where R1 and R2 are the resistors in the feedback network, Vin is the input voltage, and Vref is the internal reference voltage (1.25V).