Part Details for TLC0838CPWR by Texas Instruments
Results Overview of TLC0838CPWR by Texas Instruments
- Distributor Offerings: (2 listings)
- Number of FFF Equivalents: (3 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Education and Research
Internet of Things (IoT)
Computing and Data Storage
Aerospace and Defense
Healthcare
Telecommunications
Automotive
TLC0838CPWR Information
TLC0838CPWR by Texas Instruments is an Analog to Digital Converter.
Analog to Digital Converters are under the broader part category of Converters.
A converter is an electrical circuit that transforms electric energy into a different form that will support a elecrical load needed by a device. Read more about Converters on our Converters part category page.
Price & Stock for TLC0838CPWR
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
595-TLC0838CPWR
|
Mouser Electronics | Analog to Digital Converters - ADC 8-Bit 20 kSPS Serial Out A 595-TLC0838CPW RoHS: Compliant | 0 |
|
$2.8700 | Order Now |
|
|
Vyrian | Peripheral ICs | 154 |
|
RFQ |
Part Details for TLC0838CPWR
TLC0838CPWR CAD Models
TLC0838CPWR Part Data Attributes
|
|
TLC0838CPWR
Texas Instruments
Buy Now
Datasheet
|
Compare Parts:
TLC0838CPWR
Texas Instruments
8-Bit, 8-Ch, 20 kSPS ADC Serial Out, uProcessor Periph./Standalone, Rem. Op w/Ser. Data Link 20-TSSOP 0 to 70
|
| Pbfree Code | Yes | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | TEXAS INSTRUMENTS INC | |
| Part Package Code | TSSOP | |
| Package Description | TSSOP, TSSOP20,.25 | |
| Pin Count | 20 | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 | |
| Samacsys Manufacturer | Texas Instruments | |
| Analog Input Voltage-Max | 5.5 V | |
| Analog Input Voltage-Min | ||
| Conversion Time-Max | 32 µs | |
| Converter Type | ADC, SUCCESSIVE APPROXIMATION | |
| JESD-30 Code | R-PDSO-G20 | |
| JESD-609 Code | e4 | |
| Length | 6.5 mm | |
| Linearity Error-Max (EL) | 0.3906% | |
| Moisture Sensitivity Level | 1 | |
| Number of Analog In Channels | 8 | |
| Number of Bits | 8 | |
| Number of Functions | 1 | |
| Number of Terminals | 20 | |
| Operating Temperature-Max | 70 °C | |
| Operating Temperature-Min | ||
| Output Bit Code | BINARY | |
| Output Format | SERIAL | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | TSSOP | |
| Package Equivalence Code | TSSOP20,.25 | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE, THIN PROFILE, SHRINK PITCH | |
| Peak Reflow Temperature (Cel) | 260 | |
| Qualification Status | Not Qualified | |
| Sample Rate | 0.02 MHz | |
| Sample and Hold / Track and Hold | SAMPLE | |
| Seated Height-Max | 1.2 mm | |
| Supply Current-Max | 1.25 mA | |
| Supply Voltage-Min | 4.5 V | |
| Supply Voltage-Nom | 5 V | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Temperature Grade | COMMERCIAL | |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 0.65 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 30 | |
| Width | 4.4 mm |
Alternate Parts for TLC0838CPWR
This table gives cross-reference parts and alternative options found for TLC0838CPWR. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of TLC0838CPWR, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| TLC0838IPWR | Texas Instruments | $2.4440 | 8-Bit, 8-Ch, 20 kSPS ADC Serial Out, uProcessor Periph./Standalone, Rem. Op w/Ser. Data Link 20-TSSOP -40 to 85 | TLC0838CPWR vs TLC0838IPWR |
| TLC0838CPWG4 | Texas Instruments | Check for Price | 8-Bit, 20 kSPS ADC Serial Out, uProcessor Periph./Standalone, Rem. Op w/Ser. Data Link, Mux option 20-TSSOP 0 to 70 | TLC0838CPWR vs TLC0838CPWG4 |
| TLC0838CPWRG4 | Texas Instruments | Check for Price | 8-Bit, 8-Ch, 20 kSPS ADC Serial Out, uProcessor Periph./Standalone, Rem. Op w/Ser. Data Link 20-TSSOP 0 to 70 | TLC0838CPWR vs TLC0838CPWRG4 |
TLC0838CPWR Frequently Asked Questions (FAQ)
-
The TLC0838CPWR can handle clock frequencies up to 3.5 MHz, but it's recommended to operate it at 2.5 MHz or lower for optimal performance and to minimize power consumption.
-
To ensure accurate ADC conversions, make sure to follow proper PCB layout guidelines, use a stable clock source, and provide a clean power supply. Additionally, ensure that the analog input signals are properly filtered and buffered to minimize noise and interference.
-
Yes, the TLC0838CPWR can be used in a multiplexed configuration. However, you'll need to ensure that the multiplexer is properly synchronized with the ADC's conversion cycle to avoid errors. You may also need to add additional circuitry to handle the multiplexed signals.
-
The TLC0838CPWR's POR and BOR features are designed to ensure that the device resets properly during power-up and power-down conditions. To handle these features, ensure that your system design includes a proper power-up and power-down sequence, and that the device is properly reset after a power failure or brown-out condition.
-
To minimize noise and interference, it's recommended to separate the analog and digital signal traces on the PCB, and to use a ground plane to shield the analog signals. Additionally, ensure that the analog input signals are routed close to the ADC inputs, and that the digital output signals are routed away from the analog inputs.