-
Part Symbol
-
Footprint
-
3D Model
Available Download Formats
By downloading CAD models, you agree to our Terms & Conditions and Privacy Policy
8-bit 1.65- to 5.5-V I2C/SMBus I/O expander with interrupt & config registers 16-SOIC -40 to 85
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
TCA9534DWR by Texas Instruments is a Parallel IO Port.
Parallel IO Ports are under the broader part category of Microcontrollers and Processors.
Microcontrollers (MCUs) are small, low-power integrated circuits used to control embedded systems. Microcontrollers are primarily used to automate and control devices. Read more about Microcontrollers and Processors on our Microcontrollers and Processors part category page.
Part # | Distributor | Description | Stock | Price | Buy | |
---|---|---|---|---|---|---|
DISTI #
296-47827-1-ND
|
DigiKey | IC XPNDR 400KHZ I2C 16SOIC Min Qty: 1 Lead time: 12 Weeks Container: Cut Tape (CT), Digi-Reel®, Tape & Reel (TR) |
2156 In Stock |
|
$0.5529 / $1.2000 | Buy Now |
DISTI #
595-TCA9534DWR
|
Mouser Electronics | Interface - I/O Expanders 8-bit 1.65- to 5.5-V I2C/SMBus I/O expan A 595-TCA9534DWT RoHS: Compliant | 1863 |
|
$0.5460 / $1.2000 | Buy Now |
|
Quest Components | 121 |
|
$2.0000 / $4.0000 | Buy Now | |
DISTI #
TCA9534DWR
|
TME | IC: interface, I/O expander, 1.65÷5.5VDC, I2C,SMBus, SMD, SO16-W Min Qty: 1 | 0 |
|
$0.7600 / $1.1300 | RFQ |
DISTI #
TCA9534DWR
|
Chip One Stop | Semiconductors RoHS: Compliant pbFree: Yes Min Qty: 1 Lead time: 0 Weeks, 1 Days Container: Cut Tape | 2119 |
|
$0.6410 / $1.1000 | Buy Now |
|
LCSC | 400kHz I2C SOIC-16-300mil I/O Expanders ROHS | 1 |
|
$0.6138 / $1.1073 | Buy Now |
By downloading CAD models, you agree to our Terms & Conditions and Privacy Policy
|
TCA9534DWR
Texas Instruments
Buy Now
Datasheet
|
Compare Parts:
TCA9534DWR
Texas Instruments
8-bit 1.65- to 5.5-V I2C/SMBus I/O expander with interrupt & config registers 16-SOIC -40 to 85
|
Pbfree Code | Yes | |
Rohs Code | Yes | |
Part Life Cycle Code | Active | |
Ihs Manufacturer | TEXAS INSTRUMENTS INC | |
Package Description | SOIC-16 | |
Reach Compliance Code | compliant | |
ECCN Code | EAR99 | |
Date Of Intro | 2016-11-24 | |
Samacsys Manufacturer | Texas Instruments | |
Address Bus Width | 8 | |
Clock Frequency-Max | 0.4 MHz | |
External Data Bus Width | ||
JESD-30 Code | R-PDSO-G16 | |
JESD-609 Code | e4 | |
Length | 10.3 mm | |
Moisture Sensitivity Level | 1 | |
Number of Bits | 8 | |
Number of I/O Lines | 8 | |
Number of Ports | 1 | |
Number of Terminals | 16 | |
Operating Temperature-Max | 85 °C | |
Operating Temperature-Min | -40 °C | |
Package Body Material | PLASTIC/EPOXY | |
Package Code | SOP | |
Package Shape | RECTANGULAR | |
Package Style | SMALL OUTLINE | |
Peak Reflow Temperature (Cel) | 260 | |
Seated Height-Max | 2.65 mm | |
Supply Current-Max | 0.04 mA | |
Supply Voltage-Max | 5.5 V | |
Supply Voltage-Min | 1.65 V | |
Supply Voltage-Nom | 1.8 V | |
Surface Mount | YES | |
Technology | CMOS | |
Temperature Grade | INDUSTRIAL | |
Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) | |
Terminal Form | GULL WING | |
Terminal Pitch | 1.27 mm | |
Terminal Position | DUAL | |
Time@Peak Reflow Temperature-Max (s) | 30 | |
Width | 7.5 mm | |
uPs/uCs/Peripheral ICs Type | PARALLEL IO PORT, GENERAL PURPOSE |
This table gives cross-reference parts and alternative options found for TCA9534DWR. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of TCA9534DWR, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
Part Number | Manufacturer | Composite Price | Description | Compare |
---|---|---|---|---|
PCA9557D | Texas Instruments | $0.6541 | 8-bit 2.3- to 5.5-V I2C/SMBus I/O expander with reset & config registers 16-SOIC -40 to 85 | TCA9534DWR vs PCA9557D |
TCA9538PWR | Texas Instruments | $0.6837 | 8-bit 1.65- to 5.5-V I2C/SMBus I/O expander with interrupt, reset & config registers 16-TSSOP -40 to 85 | TCA9534DWR vs TCA9538PWR |
PCA9557RGVR | Texas Instruments | $0.7112 | 8-bit 2.3- to 5.5-V I2C/SMBus I/O expander with reset & config registers 16-VQFN -40 to 85 | TCA9534DWR vs PCA9557RGVR |
MAX7315AUE+ | Maxim Integrated Products | $3.5386 | Parallel I/O Port, 8-Bit, 8 I/O, BICMOS, PDSO16, 4.40 MM, MO-153AB, TSSOP-16 | TCA9534DWR vs MAX7315AUE+ |
PCA9557DRG4 | Texas Instruments | Check for Price | 8 I/O, PIA-GENERAL PURPOSE, PDSO16, GREEN, PLASTIC, SOIC-16 | TCA9534DWR vs PCA9557DRG4 |
935270674112 | NXP Semiconductors | Check for Price | IC 8 I/O, PIA-GENERAL PURPOSE, PDSO16, 3.90 MM, PLASTIC, MS-012, SOT-109-1, SO-16, Parallel IO Port | TCA9534DWR vs 935270674112 |
PCA9534DBQR | Texas Instruments | Check for Price | 8 I/O, PIA-GENERAL PURPOSE, PDSO16, PLASTIC, QSOP-16 | TCA9534DWR vs PCA9534DBQR |
PCA9557RGVRG4 | Texas Instruments | Check for Price | Remote 8-Bit I2C and SMBus Low-Power I/O Expander with Reset and Configuration Registers 16-VQFN -40 to 85 | TCA9534DWR vs PCA9557RGVRG4 |
PCA9557PWTG4 | Texas Instruments | Check for Price | Remote 8-Bit I2C and SMBus Low-Power I/O Expander with Reset and Configuration Registers 16-TSSOP -40 to 85 | TCA9534DWR vs PCA9557PWTG4 |
XRA1200PIG16-F | Exar Corporation | Check for Price | Parallel I/O Port, 8-Bit, 8 I/O, CMOS, PDSO16, 4.40 MM, ROHS COMPLIANT, TSSOP-16 | TCA9534DWR vs XRA1200PIG16-F |
The TCA9534DWR can support I2C bus frequencies up to 400 kHz.
To configure the TCA9534DWR to operate in input mode, set the corresponding bit in the configuration register (Register 0x03) to 1. This will enable the input mode for the respective pin.
No, the TCA9534DWR is an I2C-based device and is not compatible with SPI interface. You would need to use a different device or an I2C-to-SPI bridge chip.
The TCA9534DWR can sink or source up to 25 mA per pin.
The TCA9534DWR can be reset to its default state by pulling the RESET pin low for at least 1 ms.