Part Details for SDX100G2-A by Honeywell Sensing and Control
Results Overview of SDX100G2-A by Honeywell Sensing and Control
- Distributor Offerings: (3 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (0 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Space Technology
Environmental Monitoring
Internet of Things (IoT)
Smart Cities
Agriculture Technology
Virtual Reality (VR), Augmented Reality (AR), and Vision Systems
Medical Imaging
Consumer Electronics
Education and Research
Security and Surveillance
Aerospace and Defense
Healthcare
Robotics and Drones
SDX100G2-A Information
SDX100G2-A by Honeywell Sensing and Control is a Pressure Sensor.
Pressure Sensors are under the broader part category of Sensors/Transducers.
Sensors and transducers detect and measure physical quantities like temperature, pressure, and force, converting them into electrical signals for various applications. Read more about Sensors/Transducers on our Sensors/Transducers part category page.
Price & Stock for SDX100G2-A
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
23K1119
|
Newark | Pressure-Jz Silicon Pressure Sdx Silicon |Honeywell SDX100G2-A RoHS: Not Compliant Min Qty: 25 Package Multiple: 1 Date Code: 0 Container: Bulk | 0 |
|
$387.2600 / $437.3100 | Buy Now |
|
DISTI #
480-2865-ND
|
DigiKey | SENSOR 100PSIG 0.11" 0.1V Min Qty: 25 Lead time: 38 Weeks Container: Tray | Temporarily Out of Stock |
|
$316.1280 | Buy Now |
|
|
Master Electronics | Pressure Sensor 0psi to 100psi Gage 6-Pin DIP-G2 RoHS: Compliant | 0 |
|
$332.9000 / $846.7700 | Buy Now |
Part Details for SDX100G2-A
SDX100G2-A CAD Models
SDX100G2-A Part Data Attributes
|
|
SDX100G2-A
Honeywell Sensing and Control
Buy Now
Datasheet
|
Compare Parts:
SDX100G2-A
Honeywell Sensing and Control
Peizoresistive Sensor, Gage, 0Psi Min, 100Psi Max, 0-100mV, Rectangular, Through Hole Mount, PLASTIC, DIP-6
|
| Pbfree Code | Yes | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | HONEYWELL SENSING AND CONTROL | |
| Package Description | PLASTIC, DIP-6 | |
| Reach Compliance Code | compliant | |
| Additional Feature | TEMPERATURE COMPENSATED | |
| Body Breadth | 11.94 mm | |
| Body Height | 7.11 mm | |
| Body Length or Diameter | 13.97 mm | |
| Housing | PLASTIC | |
| Linearity (%) | 0.2 % | |
| Mounting Feature | THROUGH HOLE MOUNT | |
| Offset-Nom | 0MV | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| Output Range | 99-101mV | |
| Output Type | ANALOG VOLTAGE | |
| Package Shape/Style | RECTANGULAR | |
| Port Type | STRAIGHT | |
| Pressure Range-Max | 100 Psi | |
| Pressure Range-Min | ||
| Pressure Sensing Mode | GAGE | |
| Response Time | 100 µs | |
| Sensors/Transducers Type | PRESSURE SENSOR,PIEZORESISTIVE | |
| Supply Voltage-Max | 20 V | |
| Surface Mount | NO | |
| Termination Type | SOLDER |
SDX100G2-A Frequently Asked Questions (FAQ)
-
The recommended power-up sequence is to apply Vcc first, followed by Vdd, and then the input signal. This ensures proper device operation and prevents potential damage.
-
The output signal from the SDX100G2-A is a differential signal. It's recommended to use a differential amplifier or a receiver with a common-mode rejection ratio (CMRR) of at least 80 dB to ensure accurate signal processing.
-
The SDX100G2-A can withstand vibrations up to 10g peak acceleration in the frequency range of 10-2000 Hz. However, it's recommended to consult the datasheet and application notes for specific vibration testing and mounting guidelines.
-
The SDX100G2-A is rated for operation up to 125°C. However, it's essential to consider the device's thermal characteristics, including thermal resistance and power dissipation, to ensure reliable operation in high-temperature environments.
-
The SDX100G2-A does not require calibration. It's a pre-calibrated device, and the output signal is proportional to the applied pressure. However, it's recommended to perform a system-level calibration to account for any system-specific errors or offsets.