Part Details for SC4525ESETRT by Semtech Corporation
Results Overview of SC4525ESETRT by Semtech Corporation
- Distributor Offerings: (2 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (0 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Industrial Automation
Energy and Power Systems
Renewable Energy
SC4525ESETRT Information
SC4525ESETRT by Semtech Corporation is a Switching Regulator or Controller.
Switching Regulator or Controllers are under the broader part category of Power Circuits.
A power circuit delivers electricity in order to operate a load for an electronic device. Power circuits include transformers, generators and switches. Read more about Power Circuits on our Power Circuits part category page.
Price & Stock for SC4525ESETRT
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
3219236
|
Farnell | DC/DC CONV, BUCK, 1.3MHZ, 105DEG C RoHS: Compliant Min Qty: 1 Lead time: 56 Weeks, 4 Days Container: Cut Tape | 17 |
|
$1.1146 / $2.2752 | Buy Now |
|
|
Win Source Electronics | IC REG BUCK ADJUSTABLE 3A 8SOIC | 9390 |
|
$1.4667 / $1.8944 | Buy Now |
Part Details for SC4525ESETRT
SC4525ESETRT CAD Models
SC4525ESETRT Part Data Attributes
|
|
SC4525ESETRT
Semtech Corporation
Buy Now
Datasheet
|
Compare Parts:
SC4525ESETRT
Semtech Corporation
Switching Regulator,
|
| Rohs Code | Yes | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | SEMTECH CORP | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 | |
| Samacsys Manufacturer | SEMTECH | |
| Analog IC - Other Type | SWITCHING REGULATOR | |
| JESD-609 Code | e3 | |
| Moisture Sensitivity Level | 1 | |
| Peak Reflow Temperature (Cel) | 260 | |
| Terminal Finish | MATTE TIN |
SC4525ESETRT Frequently Asked Questions (FAQ)
-
A 4-layer PCB with a solid ground plane and a separate power plane is recommended. Keep the input and output traces short and away from each other to minimize noise and coupling.
-
Ensure the input voltage (VIN) is within the recommended range (2.7V to 5.5V). Use a stable voltage regulator and decouple the input with a 10uF capacitor. Also, ensure the EN pin is properly biased to enable or disable the device.
-
The maximum current draw of the SC4525ESETRT is 150mA. However, this can vary depending on the input voltage, output load, and operating frequency. Consult the datasheet for specific current draw characteristics.
-
Use an oscilloscope to monitor the input and output waveforms. Check for proper biasing, input voltage, and output loading. Verify the device is properly soldered and the PCB layout is correct. Consult the datasheet and application notes for troubleshooting guidelines.
-
The SC4525ESETRT is rated for operation up to 125°C. However, the device's performance and reliability may degrade at high temperatures. Consult the datasheet for thermal characteristics and consider using thermal management techniques if operating in high-temperature environments.