Part Details for PMF170XP by NXP Semiconductors
Results Overview of PMF170XP by NXP Semiconductors
- Distributor Offerings: (3 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (1 option)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
PMF170XP Information
PMF170XP by NXP Semiconductors is a Small Signal Field-Effect Transistor.
Small Signal Field-Effect Transistors are under the broader part category of Transistors.
A transistor is a small semiconductor device used to amplify, control, or create electrical signals. When selecting a transistor, factors such as voltage, current rating, gain, and power dissipation must be considered, with common types. Read more about Transistors on our Transistors part category page.
Price & Stock for PMF170XP
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Quest Components | 808 |
|
$0.0800 / $0.4000 | Buy Now | |
|
|
ComSIT USA | 20 V, 1 A P-CHANNEL TRENCH MOSFET Small Signal Field-Effect Transistor, 1A I(D), 20V, 1-Element, P-Channel, Silicon, Metal-oxide Semiconductor FET ECCN: EAR99 RoHS: Compliant |
|
|
RFQ | |
|
|
Win Source Electronics | MOSFET P-CH 20V 1A SOT323 | 115602 |
|
$0.0418 / $0.0626 | Buy Now |
Part Details for PMF170XP
PMF170XP CAD Models
PMF170XP Part Data Attributes
|
|
PMF170XP
NXP Semiconductors
Buy Now
Datasheet
|
Compare Parts:
PMF170XP
NXP Semiconductors
1000mA, 20V, P-CHANNEL, Si, SMALL SIGNAL, MOSFET, PLASTIC, SC-70, 3 PIN
|
| Rohs Code | Yes | |
| Part Life Cycle Code | Transferred | |
| Ihs Manufacturer | NXP SEMICONDUCTORS | |
| Part Package Code | SC-70 | |
| Package Description | PLASTIC, SC-70, 3 PIN | |
| Pin Count | 3 | |
| Reach Compliance Code | unknown | |
| ECCN Code | EAR99 | |
| Samacsys Manufacturer | NXP | |
| Configuration | SINGLE WITH BUILT-IN DIODE | |
| DS Breakdown Voltage-Min | 20 V | |
| Drain Current-Max (ID) | 1 A | |
| Drain-source On Resistance-Max | 0.3 Ω | |
| FET Technology | METAL-OXIDE SEMICONDUCTOR | |
| JESD-30 Code | R-PDSO-G3 | |
| JESD-609 Code | e3 | |
| Moisture Sensitivity Level | 1 | |
| Number of Elements | 1 | |
| Number of Terminals | 3 | |
| Operating Mode | ENHANCEMENT MODE | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE | |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED | |
| Polarity/Channel Type | P-CHANNEL | |
| Qualification Status | Not Qualified | |
| Surface Mount | YES | |
| Terminal Finish | Tin (Sn) | |
| Terminal Form | GULL WING | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED | |
| Transistor Application | SWITCHING | |
| Transistor Element Material | SILICON |
Alternate Parts for PMF170XP
This table gives cross-reference parts and alternative options found for PMF170XP. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of PMF170XP, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| PMF170XP,115 | Nexperia | $0.0912 | PMF170XP - 20 V, 1 A P-channel Trench MOSFET@en-us SC-70 3-Pin | PMF170XP vs PMF170XP,115 |
PMF170XP Frequently Asked Questions (FAQ)
-
NXP recommends a thermal pad on the bottom of the package, connected to a large copper area on the PCB to dissipate heat. A minimum of 2oz copper thickness is recommended, and the thermal pad should be connected to a ground plane to reduce thermal resistance.
-
To ensure reliable operation at high temperatures, it's essential to follow the recommended thermal design guidelines, including proper heat sinking, thermal interface materials, and airflow. Additionally, derating the device's power dissipation and voltage ratings according to the temperature derating curves in the datasheet is crucial.
-
The internal voltage regulator has a limited current capability (typically 50mA) and may not be suitable for powering external circuits. It's recommended to use an external voltage regulator for powering external components, especially if high currents are required.
-
To optimize power consumption, use the device's power-saving modes (e.g., sleep mode), reduce the clock frequency, and minimize the number of active circuits. Additionally, using a low-dropout voltage regulator and optimizing the power supply design can help reduce power consumption.
-
The PMF170XP has internal ESD protection, but it's still essential to follow proper ESD handling and storage procedures to prevent damage. Additionally, using external ESD protection devices, such as TVS diodes, can provide additional protection for the device and surrounding circuits.