Part Details for P0080SARP by Littelfuse Inc
Results Overview of P0080SARP by Littelfuse Inc
- Distributor Offerings: (3 listings)
- Number of FFF Equivalents: (1 replacement)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (0 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
P0080SARP Information
P0080SARP by Littelfuse Inc is a Silicon Surge Protector.
Silicon Surge Protectors are under the broader part category of Trigger Devices.
Trigger devices initiate or control actions in electronic circuits by producing output signals when specific input conditions are met. They are commonly used in timing circuits and pulse generators. Read more about Trigger Devices on our Trigger Devices part category page.
Price & Stock for P0080SARP
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Bristol Electronics | 2787 |
|
RFQ | ||
|
|
Quest Components | 20 A, SILICON SURGE PROTECTOR, DO-214AA | 2192 |
|
$0.3520 / $0.9600 | Buy Now |
|
|
Quest Components | 20 A, SILICON SURGE PROTECTOR, DO-214AA | 880 |
|
$1.0395 / $2.5200 | Buy Now |
Part Details for P0080SARP
P0080SARP CAD Models
P0080SARP Part Data Attributes
|
|
P0080SARP
Littelfuse Inc
Buy Now
Datasheet
|
Compare Parts:
P0080SARP
Littelfuse Inc
Silicon Surge Protector, 25V V(BO) Max, 20A, DO-214AA, DO-214AA, 2 PIN
|
| Rohs Code | No | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | LITTELFUSE INC | |
| Part Package Code | DO-214AA | |
| Package Description | DO-214AA, 2 PIN | |
| Pin Count | 2 | |
| Reach Compliance Code | unknown | |
| ECCN Code | EAR99 | |
| HTS Code | 8541.30.00.80 | |
| Breakover Voltage-Max | 25 V | |
| Configuration | SINGLE | |
| DC Off-state Voltage-Max | 5 V | |
| Holding Current-Max | 50 mA | |
| JEDEC-95 Code | DO-214AA | |
| JESD-30 Code | R-PDSO-C2 | |
| JESD-609 Code | e0 | |
| Moisture Sensitivity Level | 1 | |
| Non-Repetitive Pk On-state Cur | 20 A | |
| Number of Elements | 1 | |
| Number of Terminals | 2 | |
| Operating Temperature-Max | 150 °C | |
| Operating Temperature-Min | -40 °C | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE | |
| Peak Reflow Temperature (Cel) | 260 | |
| Qualification Status | Not Qualified | |
| Repetitive Peak Reverse Voltage | 6 V | |
| Surface Mount | YES | |
| Terminal Finish | TIN LEAD | |
| Terminal Form | C BEND | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 30 | |
| Trigger Device Type | SILICON SURGE PROTECTOR |
Alternate Parts for P0080SARP
This table gives cross-reference parts and alternative options found for P0080SARP. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of P0080SARP, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| P0080SARP | Teccor | Check for Price | Silicon Surge Protector, 25V V(BO) Max, 20A, DO-214AA, DO-214AA, 2 PIN | P0080SARP vs P0080SARP |
P0080SARP Frequently Asked Questions (FAQ)
-
A good PCB layout for the P0080SARP should ensure that the input and output pins are separated by a sufficient distance to minimize electromagnetic interference (EMI). Additionally, the PCB should have a solid ground plane and a low-impedance path for the return current. It's also recommended to use a shielded cable for the input and output connections to reduce EMI.
-
The P0080SARP has built-in overvoltage protection (OVP) and undervoltage protection (UVP) circuits. In the event of an overvoltage condition, the device will limit the output voltage to prevent damage to the downstream circuitry. In the event of an undervoltage condition, the device will shut down to prevent malfunction. The specific voltage thresholds for OVP and UVP can be found in the datasheet.
-
The P0080SARP has an operating temperature range of -40°C to +125°C. However, the device's performance and reliability may degrade at extreme temperatures. It's recommended to operate the device within the recommended temperature range specified in the datasheet for optimal performance and reliability.
-
Yes, the P0080SARP is designed to meet the requirements of high-reliability applications such as aerospace and automotive. The device is built with high-quality components and undergoes rigorous testing to ensure its reliability and performance. However, it's recommended to consult with Littelfuse Inc or a qualified engineer to ensure that the device meets the specific requirements of the application.
-
The P0080SARP has built-in protection against electromagnetic pulses (EMPs) and electrostatic discharge (ESD). The device is designed to withstand EMPs and ESD events up to a certain level, as specified in the datasheet. However, it's recommended to take additional precautions such as using ESD protection devices and following proper handling and storage procedures to prevent damage to the device.