Part Details for MPX2200DP by Freescale Semiconductor
Results Overview of MPX2200DP by Freescale Semiconductor
- Distributor Offerings: (2 listings)
- Number of FFF Equivalents: (1 replacement)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (0 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
MPX2200DP Information
MPX2200DP by Freescale Semiconductor is a Pressure Sensor.
Pressure Sensors are under the broader part category of Sensors/Transducers.
Sensors and transducers detect and measure physical quantities like temperature, pressure, and force, converting them into electrical signals for various applications. Read more about Sensors/Transducers on our Sensors/Transducers part category page.
Price & Stock for MPX2200DP
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
70187265
|
RS | Sensor, 0 to 29 PSI, 0.2, 1%, 1 ms, 10 VDC, 6 mAdc, 1 mV, -40 C, 125 C Min Qty: 1 Package Multiple: 1 Container: Bulk | 0 |
|
$12.9500 / $15.7900 | RFQ |
|
|
ComSIT USA | Electronic Component RoHS: Not Compliant |
|
|
RFQ |
Part Details for MPX2200DP
MPX2200DP CAD Models
MPX2200DP Part Data Attributes
|
|
MPX2200DP
Freescale Semiconductor
Buy Now
Datasheet
|
Compare Parts:
MPX2200DP
Freescale Semiconductor
Pressure Sensor, 10V, 0/200kPa, Sensor 4, Port,Tray
|
| Pbfree Code | Yes | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Transferred | |
| Ihs Manufacturer | FREESCALE SEMICONDUCTOR INC | |
| Package Description | PLASTIC, UNBODY PACKAGE-4 | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 | |
| Additional Feature | TEMPERATURE COMPENSATED | |
| Body Breadth | 17.78 mm | |
| Body Height | 12.19 mm | |
| Body Length or Diameter | 15.56 mm | |
| Housing | PLASTIC | |
| Linearity (%) | 1 % | |
| Mounting Feature | THROUGH HOLE MOUNT | |
| Offset-Nom | 0V | |
| Operating Current-Max | 6 mA | |
| Operating Temperature-Max | 125 °C | |
| Operating Temperature-Min | -40 °C | |
| Output Range | 0-40mV | |
| Output Type | ANALOG VOLTAGE | |
| Package Shape/Style | BARREL | |
| Port Type | BARBED | |
| Pressure Range-Max | 29 Psi | |
| Pressure Range-Min | ||
| Pressure Sensing Mode | DIFFERENTIAL | |
| Response Time | 1000 µs | |
| Sensors/Transducers Type | PRESSURE SENSOR,PIEZORESISTIVE | |
| Supply Voltage-Max | 16 V | |
| Supply Voltage-Min | 10 V | |
| Surface Mount | NO | |
| Termination Type | SOLDER |
Alternate Parts for MPX2200DP
This table gives cross-reference parts and alternative options found for MPX2200DP. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of MPX2200DP, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| MPX2200DP | NXP Semiconductors | $12.0315 | DIFFERENTIAL, PEIZORESISTIVE PRESSURE SENSOR, 0-29Psi, 0-40mV, BARREL, THROUGH HOLE MOUNT | MPX2200DP vs MPX2200DP |
MPX2200DP Frequently Asked Questions (FAQ)
-
The recommended PCB layout for the MPX2200DP involves placing the sensor on a dedicated PCB with a solid ground plane, using a 4-layer PCB with a dedicated power plane, and keeping the signal traces as short as possible to minimize noise and interference.
-
The MPX2200DP requires a two-point calibration process, where the sensor is exposed to two known pressure points (e.g., atmospheric pressure and a known pressure reference) and the output voltage is measured and recorded. The calibration data can then be used to create a lookup table or equation to convert the sensor output to pressure values.
-
The MPX2200DP's accuracy is affected by temperature, with a typical temperature coefficient of ±0.5% FS/°C. This means that the sensor's output voltage will change by ±0.5% of the full-scale range for every degree Celsius change in temperature. Temperature compensation is recommended to achieve accurate pressure measurements.
-
The MPX2200DP is not designed for use in humid or wet environments, as it is not hermetically sealed and can be damaged by moisture. If the sensor must be used in a humid or wet environment, it is recommended to use a protective coating or enclosure to prevent moisture ingress.
-
The MPX2200DP requires a stable power supply with a voltage range of 4.75V to 5.25V. A low-noise, regulated power supply is recommended to minimize noise and interference in the sensor's output signal.