Part Details for MK2705SLF by Integrated Device Technology Inc
Results Overview of MK2705SLF by Integrated Device Technology Inc
- Distributor Offerings: (1 listing)
- Number of FFF Equivalents: (1 replacement)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (9 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
MK2705SLF Information
MK2705SLF by Integrated Device Technology Inc is a Clock Generator.
Clock Generators are under the broader part category of Microcontrollers and Processors.
Microcontrollers (MCUs) are small, low-power integrated circuits used to control embedded systems. Microcontrollers are primarily used to automate and control devices. Read more about Microcontrollers and Processors on our Microcontrollers and Processors part category page.
Price & Stock for MK2705SLF
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Quest Components | CLOCK GENERATOR, 24.576MHZ, CMOS, PDSO8 | 31 |
|
$1.7250 / $3.4500 | Buy Now |
Part Details for MK2705SLF
MK2705SLF CAD Models
MK2705SLF Part Data Attributes
|
|
MK2705SLF
Integrated Device Technology Inc
Buy Now
Datasheet
|
Compare Parts:
MK2705SLF
Integrated Device Technology Inc
SOIC-8, Tube
|
| Pbfree Code | Yes | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Transferred | |
| Ihs Manufacturer | INTEGRATED DEVICE TECHNOLOGY INC | |
| Part Package Code | SOIC | |
| Package Description | SOIC-8 | |
| Pin Count | 8 | |
| Manufacturer Package Code | DCG8 | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 | |
| JESD-30 Code | R-PDSO-G8 | |
| JESD-609 Code | e3 | |
| Length | 4.9 mm | |
| Moisture Sensitivity Level | 1 | |
| Number of Terminals | 8 | |
| Operating Temperature-Max | 70 °C | |
| Operating Temperature-Min | ||
| Output Clock Frequency-Max | 24.576 MHz | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | SOP | |
| Package Equivalence Code | SOP8,.25 | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE | |
| Peak Reflow Temperature (Cel) | 260 | |
| Primary Clock/Crystal Frequency-Nom | 27 MHz | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 1.75 mm | |
| Supply Voltage-Max | 3.6 V | |
| Supply Voltage-Min | 3 V | |
| Supply Voltage-Nom | 3.3 V | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Temperature Grade | COMMERCIAL | |
| Terminal Finish | MATTE TIN | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 1.27 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 30 | |
| Width | 3.9 mm | |
| uPs/uCs/Peripheral ICs Type | CLOCK GENERATOR, OTHER |
Alternate Parts for MK2705SLF
This table gives cross-reference parts and alternative options found for MK2705SLF. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of MK2705SLF, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| MK2705STR | Integrated Device Technology Inc | Check for Price | Video Clock Generator, 24.576MHz, PDSO8, 0.150 INCH, SOIC-8 | MK2705SLF vs MK2705STR |
MK2705SLF Frequently Asked Questions (FAQ)
-
A good PCB layout for the MK2705SLF involves keeping the input and output traces short and separate, using a solid ground plane, and placing decoupling capacitors close to the device. A 4-layer PCB with a dedicated power plane and a solid ground plane is recommended.
-
To ensure proper power-up and initialization, apply power to the device in the following sequence: VCC, then VDD, and finally CLKIN. The device should be powered up with a slow ramp-up time (typically 1-2 ms) to prevent latch-up. Also, ensure that the input clock signal is stable and within the specified frequency range before enabling the device.
-
The MK2705SLF has a maximum junction temperature of 150°C. To prevent overheating, ensure good airflow around the device, use a heat sink if necessary, and avoid blocking the thermal pads on the package. Also, follow the recommended PCB layout guidelines to minimize thermal resistance.
-
To troubleshoot issues with the MK2705SLF, use a high-speed oscilloscope to measure the output signals and clock jitter. Check the input clock signal quality, power supply noise, and PCB layout for any issues. Also, verify that the device is properly powered up and initialized, and that the input clock frequency is within the specified range.
-
Yes, the MK2705SLF is a high-frequency device and requires proper EMI/EMC design considerations. Use a shielded enclosure, keep the device away from other noise-sensitive components, and use EMI filters or shielding on the input and output signals if necessary. Also, follow the recommended PCB layout guidelines to minimize EMI radiation.