Part Details for MCP4011T-503E/SN by Microchip Technology Inc
Results Overview of MCP4011T-503E/SN by Microchip Technology Inc
- Distributor Offerings: (11 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Industrial Automation
MCP4011T-503E/SN Information
MCP4011T-503E/SN by Microchip Technology Inc is a Digital Potentiometer.
Digital Potentiometers are under the broader part category of Converters.
A converter is an electrical circuit that transforms electric energy into a different form that will support a elecrical load needed by a device. Read more about Converters on our Converters part category page.
Price & Stock for MCP4011T-503E/SN
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
56K7026
|
Newark | Ic, digital Potentiometer, cmos, sop,8Pin, plastic Rohs Compliant: Yes |Microchip MCP4011T-503E/SN RoHS: Compliant Min Qty: 3300 Package Multiple: 1 Date Code: 0 Container: Reel | 0 |
|
$0.5620 | Buy Now |
|
DISTI #
MCP4011T-503E/SNCT-ND
|
DigiKey | IC DGTL POT 50KOHM 64TAP 8SOIC Min Qty: 1 Lead time: 6 Weeks Container: Digi-Reel®, Cut Tape (CT), Tape & Reel (TR) |
3154 In Stock |
|
$0.5300 / $0.6800 | Buy Now |
|
DISTI #
MCP4011T-503E/SN
|
Avnet Americas | Digital Potentiometer, Volatile, 50 kOhm, Single, 64 Steps, ? 150 ppm/?C, 1.8 V to 5.5 V, 8 Pins, NSOIC - Tape and Reel (Alt: MCP4011T-503E/SN) RoHS: Compliant Min Qty: 3300 Package Multiple: 3300 Lead time: 6 Weeks, 0 Days Container: Reel | 0 |
|
$0.5148 / $0.5500 | Buy Now |
|
DISTI #
579-MCP4011T-503E/SN
|
Mouser Electronics | Digital Potentiometer ICs 50k U/Dsingle 6-bit V POT RoHS: Compliant | 3542 |
|
$0.5300 / $0.6800 | Buy Now |
|
DISTI #
MCP4011T-503E/SN
|
Microchip Technology Inc | Low-cost volatile, Digital Potentiometer, SOIC, Projected EOL: 2034-12-08 COO: Thailand ECCN: EAR99 RoHS: Compliant Lead time: 6 Weeks, 0 Days Container: Reel |
16952 Alternates Available |
|
$0.4900 / $0.6800 | Buy Now |
|
DISTI #
70568968
|
RS | Digital Potentiometer, ICs 50k U/Dsingle 6-bit V POT Min Qty: 3300 Package Multiple: 1 Lead time: 6 Weeks, 0 Days Container: Bulk | 0 |
|
$0.7800 / $0.9200 | RFQ |
|
|
Onlinecomponents.com | RoHS: Compliant | 16500 Factory Stock |
|
$0.4469 / $0.9360 | Buy Now |
|
DISTI #
MCP4011T-503E/SN
|
IBS Electronics | DIGITAL POTENTIOMETER 50KOHM 64POS VOLATILE AUTOMOTIVE 8-PIN SOIC N T/R Min Qty: 3300 Package Multiple: 1 | 0 |
|
$0.6370 / $0.6630 | Buy Now |
|
|
NAC | 50k, U/D single, 6-bit V, POT - Package: 8 SOIC 3.90mm(.150in) T/R RoHS: Compliant Min Qty: 3300 Package Multiple: 3300 | 0 |
|
$0.5500 / $0.6800 | Buy Now |
|
DISTI #
MCP4011T-503E/SN
|
Avnet Silica | Digital Potentiometer Volatile 50 kOhm Single 64 Steps 150 ppmC 18 V to 55 V 8 Pins NSOIC (Alt: MCP4011T-503E/SN) RoHS: Compliant Min Qty: 3300 Package Multiple: 3300 Lead time: 8 Weeks, 0 Days | Silica - 0 |
|
Buy Now |
Part Details for MCP4011T-503E/SN
MCP4011T-503E/SN CAD Models
MCP4011T-503E/SN Part Data Attributes
|
|
MCP4011T-503E/SN
Microchip Technology Inc
Buy Now
Datasheet
|
Compare Parts:
MCP4011T-503E/SN
Microchip Technology Inc
50K DIGITAL POTENTIOMETER, INCREMENT/DECREMENT CONTROL INTERFACE, 64 POSITIONS, PDSO8, 0.150 INCH, PLASTIC, MS-012, SOIC-8
|
| Pbfree Code | Yes | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | MICROCHIP TECHNOLOGY INC | |
| Part Package Code | SOIC | |
| Pin Count | 8 | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 | |
| Factory Lead Time | 6 Weeks | |
| Samacsys Manufacturer | Microchip | |
| Bandwidth-Nom | 0.2 kHz | |
| Control Interface | INCREMENT/DECREMENT | |
| Converter Type | DIGITAL POTENTIOMETER | |
| JESD-30 Code | R-PDSO-G8 | |
| JESD-609 Code | e3 | |
| Length | 4.9 mm | |
| Moisture Sensitivity Level | 1 | |
| Number of Functions | 1 | |
| Number of Positions | 64 | |
| Number of Terminals | 8 | |
| Operating Temperature-Max | 125 °C | |
| Operating Temperature-Min | -40 °C | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | SOP | |
| Package Equivalence Code | SOP8,.23 | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE | |
| Peak Reflow Temperature (Cel) | 260 | |
| Qualification Status | Not Qualified | |
| Resistance Law | LINEAR | |
| Resistance Tolerance-Max | 20% | |
| Resistor Terminal Voltage-Max | 5 V | |
| Resistor Terminal Voltage-Min | ||
| Screening Level | TS 16949 | |
| Seated Height-Max | 1.75 mm | |
| Supply Current-Max | 0.45 mA | |
| Supply Voltage-Nom | 5 V | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Temperature Coefficient-Nom | 150 ppm/°C | |
| Temperature Grade | AUTOMOTIVE | |
| Terminal Finish | Matte Tin (Sn) | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 1.27 mm | |
| Terminal Position | DUAL | |
| Total Resistance-Nom | 50000 Ω | |
| Width | 3.9 mm |
Alternate Parts for MCP4011T-503E/SN
This table gives cross-reference parts and alternative options found for MCP4011T-503E/SN. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of MCP4011T-503E/SN, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| MCP4013T-503E/CH | Microchip Technology Inc | $0.4789 | 50K DIGITAL POTENTIOMETER, INCREMENT/DECREMENT CONTROL INTERFACE, 64 POSITIONS, PDSO6, PLASTIC, SC-74A, SOT-23, 6 PIN | MCP4011T-503E/SN vs MCP4013T-503E/CH |
| MCP4022T-503E/CH | Microchip Technology Inc | $0.8225 | 50K DIGITAL POTENTIOMETER, INCREMENT/DECREMENT CONTROL INTERFACE, 64 POSITIONS, PDSO6, PLASTIC, SC-74A, SOT-23, 6 PIN | MCP4011T-503E/SN vs MCP4022T-503E/CH |
| MCP4021-503E/MS | Microchip Technology Inc | $0.8934 | 50K DIGITAL POTENTIOMETER, INCREMENT/DECREMENT CONTROL INTERFACE, 64 POSITIONS, PDSO8, PLASTIC, MSOP-8 | MCP4011T-503E/SN vs MCP4021-503E/MS |
| MCP4024T-503E/OT | Microchip Technology Inc | $0.9429 | 50K DIGITAL POTENTIOMETER, INCREMENT/DECREMENT CONTROL INTERFACE, 64 POSITIONS, PDSO5, PLASTIC, SC-74A, SOT-23, 5 PIN | MCP4011T-503E/SN vs MCP4024T-503E/OT |
| MCP4023T-503E/CH | Microchip Technology Inc | $0.9626 | 50K DIGITAL POTENTIOMETER, INCREMENT/DECREMENT CONTROL INTERFACE, 64 POSITIONS, PDSO6, PLASTIC, SC-74A, SOT-23, 6 PIN | MCP4011T-503E/SN vs MCP4023T-503E/CH |
| MCP4021T-503E/SN | Microchip Technology Inc | $0.9719 | 50K DIGITAL POTENTIOMETER, INCREMENT/DECREMENT CONTROL INTERFACE, 64 POSITIONS, PDSO8, 0.150 INCH, PLASTIC, MS-012, SOIC-8 | MCP4011T-503E/SN vs MCP4021T-503E/SN |
| MCP4021T-503E/MC | Microchip Technology Inc | $1.0000 | 50K DIGITAL POTENTIOMETER, INCREMENT/DECREMENT CONTROL INTERFACE, 64 POSITIONS, PDSO8, 2 X 3 MM, 0.90 MM HEIGHT, PLASTIC, DFN-8 | MCP4011T-503E/SN vs MCP4021T-503E/MC |
| MCP4024-503E/OT | Microchip Technology Inc | Check for Price | 50K DIGITAL POTENTIOMETER, INCREMENT/DECREMENT CONTROL INTERFACE, 64 POSITIONS, PDSO5, PLASTIC, SC-74A, SOT-23, 5 PIN | MCP4011T-503E/SN vs MCP4024-503E/OT |
| MCP4014-503E/OT | Microchip Technology Inc | Check for Price | 50K DIGITAL POTENTIOMETER, INCREMENT/DECREMENT CONTROL INTERFACE, 64 POSITIONS, PDSO5, PLASTIC, SC-74A, SOT-23, 5 PIN | MCP4011T-503E/SN vs MCP4014-503E/OT |
| MCP4013-503E/CH | Microchip Technology Inc | Check for Price | 50K DIGITAL POTENTIOMETER, INCREMENT/DECREMENT CONTROL INTERFACE, 64 POSITIONS, PDSO6, PLASTIC, SC-74A, SOT-23, 6 PIN | MCP4011T-503E/SN vs MCP4013-503E/CH |
MCP4011T-503E/SN Frequently Asked Questions (FAQ)
-
The recommended power-up sequence is to apply VDD before applying the clock signal. This ensures that the internal circuitry is properly initialized.
-
To retain the wiper position during power-down, the CS pin should be held high and the SCK pin should be held low. This ensures that the wiper position is latched and retained.
-
The maximum frequency of the clock signal (SCK) is 1 MHz. Exceeding this frequency may result in incorrect operation or damage to the device.
-
Yes, the MCP4011T-503E/SN can be used in a ratiometric application. The device is designed to maintain a consistent resistance ratio between the wiper and the A/B terminals, making it suitable for ratiometric applications.
-
When the wiper is at the extreme ends (0 or 127), it is not possible to move it further in that direction. In this case, the device will ignore any further commands to move the wiper in that direction. To avoid this situation, it is recommended to implement a software limit check to prevent the wiper from reaching the extreme ends.