Part Details for MCP4011T-103E/MC by Microchip Technology Inc
Results Overview of MCP4011T-103E/MC by Microchip Technology Inc
- Distributor Offerings: (11 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
MCP4011T-103E/MC Information
MCP4011T-103E/MC by Microchip Technology Inc is a Digital Potentiometer.
Digital Potentiometers are under the broader part category of Converters.
A converter is an electrical circuit that transforms electric energy into a different form that will support a elecrical load needed by a device. Read more about Converters on our Converters part category page.
Price & Stock for MCP4011T-103E/MC
Part # | Distributor | Description | Stock | Price | Buy | |
---|---|---|---|---|---|---|
DISTI #
02AH4477
|
Newark | Digital Pot, 10K, -40 To 125Deg C, End To End Resistance:10Kohm, No. Of Pots:Single, Control Interface:I2C, Track Taper:Linear, Resistance Tolerance:± 20%, Supply Voltage Min:1.8V, Supply Voltage Max:5.5V, Potentiometer Ic Case Rohs Compliant: Yes |Microchip MCP4011T-103E/MC RoHS: Compliant Min Qty: 1 Package Multiple: 1 Date Code: 1 Container: Cut Tape | 2300 |
|
$0.6800 | Buy Now |
DISTI #
56K7015
|
Newark | Ic, digital Potentiometer, cmos, llcc,8Pin, plastic Rohs Compliant: Yes |Microchip MCP4011T-103E/MC RoHS: Compliant Min Qty: 3300 Package Multiple: 1 Date Code: 0 Container: Reel | 0 |
|
$0.5620 | Buy Now |
DISTI #
MCP4011T-103E/MCCT-ND
|
DigiKey | IC DGTL POT 10KOHM 64TAP 8DFN Min Qty: 1 Lead time: 11 Weeks Container: Cut Tape (CT), Digi-Reel®, Tape & Reel (TR) |
6097 In Stock |
|
$0.5300 / $0.6800 | Buy Now |
DISTI #
MCP4011T-103E/MC
|
Avnet Americas | Digital Potentiometer, Volatile, 10 kOhm, Single, 64 Steps, ? 150 ppm/?C, 1.8 V to 5.5 V, 8 Pins, PDFN-EP - Tape and Reel (Alt: MCP4011T-103E/MC) RoHS: Compliant Min Qty: 3300 Package Multiple: 3300 Lead time: 11 Weeks, 0 Days Container: Reel | 0 |
|
$0.5148 / $0.5500 | Buy Now |
DISTI #
579-MCP4011T-103E/MC
|
Mouser Electronics | Digital Potentiometer ICs 10k U/Dsingle 6-bit V POT RoHS: Compliant | 1211 |
|
$0.5300 / $0.6800 | Buy Now |
DISTI #
70452538
|
RS | 10k, U/D single, 6-bit V, POT8 DFN 2x3x0.9mm T/R Min Qty: 3300 Package Multiple: 1 Lead time: 45 Weeks, 0 Days Container: Bulk | 0 |
|
$0.7800 / $0.9200 | RFQ |
|
Onlinecomponents.com | RoHS: Compliant | 0 |
|
$0.4469 / $0.9360 | Buy Now |
|
NAC | 10k, U/D single, 6-bit V, POT - Package: 8 DFN 2x3x0.9mm T/R RoHS: Compliant Min Qty: 3300 Package Multiple: 3300 | 0 |
|
$0.5500 / $0.6800 | Buy Now |
DISTI #
MCP4011T-103E/MC
|
Avnet Silica | Digital Potentiometer Volatile 10 kOhm Single 64 Steps 150 ppmC 18 V to 55 V 8 Pins PDFNEP (Alt: MCP4011T-103E/MC) RoHS: Compliant Min Qty: 3300 Package Multiple: 3300 Lead time: 13 Weeks, 0 Days | Silica - 0 |
|
Buy Now | |
DISTI #
MCP4011T-103E/MC
|
EBV Elektronik | Digital Potentiometer Volatile 10 kOhm Single 64 Steps 150 ppmC 18 V to 55 V 8 Pins PDFNEP (Alt: MCP4011T-103E/MC) RoHS: Compliant Min Qty: 3300 Package Multiple: 3300 Lead time: 12 Weeks, 0 Days | EBV - 0 |
|
Buy Now |
Part Details for MCP4011T-103E/MC
MCP4011T-103E/MC CAD Models
MCP4011T-103E/MC Part Data Attributes
|
MCP4011T-103E/MC
Microchip Technology Inc
Buy Now
Datasheet
|
Compare Parts:
MCP4011T-103E/MC
Microchip Technology Inc
10K DIGITAL POTENTIOMETER, INCREMENT/DECREMENT CONTROL INTERFACE, 64 POSITIONS, PDSO8, 2 X 3 MM, 0.90 MM HEIGHT, PLASTIC, DFN-8
|
Pbfree Code | Yes | |
Rohs Code | Yes | |
Part Life Cycle Code | Active | |
Ihs Manufacturer | MICROCHIP TECHNOLOGY INC | |
Part Package Code | DFN | |
Pin Count | 8 | |
Reach Compliance Code | compliant | |
ECCN Code | EAR99 | |
HTS Code | 8542.39.00.01 | |
Factory Lead Time | 11 Weeks | |
Samacsys Manufacturer | Microchip | |
Bandwidth-Nom | 1 kHz | |
Control Interface | INCREMENT/DECREMENT | |
Converter Type | DIGITAL POTENTIOMETER | |
JESD-30 Code | R-PDSO-N8 | |
JESD-609 Code | e3 | |
Length | 3 mm | |
Moisture Sensitivity Level | 1 | |
Number of Functions | 1 | |
Number of Positions | 64 | |
Number of Terminals | 8 | |
Operating Temperature-Max | 125 °C | |
Operating Temperature-Min | -40 °C | |
Package Body Material | PLASTIC/EPOXY | |
Package Code | HVSON | |
Package Equivalence Code | SOLCC8,.12,20 | |
Package Shape | RECTANGULAR | |
Package Style | SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE | |
Peak Reflow Temperature (Cel) | 260 | |
Qualification Status | Not Qualified | |
Resistance Law | LINEAR | |
Resistance Tolerance-Max | 20% | |
Resistor Terminal Voltage-Max | 5 V | |
Resistor Terminal Voltage-Min | ||
Screening Level | TS 16949 | |
Seated Height-Max | 1 mm | |
Supply Current-Max | 0.45 mA | |
Supply Voltage-Nom | 5 V | |
Surface Mount | YES | |
Technology | CMOS | |
Temperature Coefficient-Nom | 150 ppm/°C | |
Temperature Grade | AUTOMOTIVE | |
Terminal Finish | Matte Tin (Sn) | |
Terminal Form | NO LEAD | |
Terminal Pitch | 0.5 mm | |
Terminal Position | DUAL | |
Time@Peak Reflow Temperature-Max (s) | 40 | |
Total Resistance-Nom | 10000 Ω | |
Width | 2 mm |
Alternate Parts for MCP4011T-103E/MC
This table gives cross-reference parts and alternative options found for MCP4011T-103E/MC. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of MCP4011T-103E/MC, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
Part Number | Manufacturer | Composite Price | Description | Compare |
---|---|---|---|---|
MCP4013T-103E/CH | Microchip Technology Inc | $0.5734 | 10K DIGITAL POTENTIOMETER, INCREMENT/DECREMENT CONTROL INTERFACE, 64 POSITIONS, PDSO6, PLASTIC, SC-74A, SOT-23, 6 PIN | MCP4011T-103E/MC vs MCP4013T-103E/CH |
MCP4011T-103E/MS | Microchip Technology Inc | $0.5849 | 10K DIGITAL POTENTIOMETER, INCREMENT/DECREMENT CONTROL INTERFACE, 64 POSITIONS, PDSO8, PLASTIC, MSOP-8 | MCP4011T-103E/MC vs MCP4011T-103E/MS |
MCP4012T-103E/CH | Microchip Technology Inc | $0.6360 | 10K DIGITAL POTENTIOMETER, INCREMENT/DECREMENT CONTROL INTERFACE, 64 POSITIONS, PDSO6, PLASTIC, SC-74A, SOT-23, 6 PIN | MCP4011T-103E/MC vs MCP4012T-103E/CH |
MCP4022T-103E/CH | Microchip Technology Inc | $0.8225 | 10K DIGITAL POTENTIOMETER, INCREMENT/DECREMENT CONTROL INTERFACE, 64 POSITIONS, PDSO6, PLASTIC, SC-74A, SOT-23, 6 PIN | MCP4011T-103E/MC vs MCP4022T-103E/CH |
MCP4024T-103E/OT | Microchip Technology Inc | $0.9626 | 10K DIGITAL POTENTIOMETER, INCREMENT/DECREMENT CONTROL INTERFACE, 64 POSITIONS, PDSO5, PLASTIC, SC-74A, SOT-23, 5 PIN | MCP4011T-103E/MC vs MCP4024T-103E/OT |
MCP4014T-103E/OT | Microchip Technology Inc | $46.7241 | 10K DIGITAL POTENTIOMETER, INCREMENT/DECREMENT CONTROL INTERFACE, 64 POSITIONS, PDSO5, PLASTIC, SC-74A, SOT-23, 5 PIN | MCP4011T-103E/MC vs MCP4014T-103E/OT |
MCP4023-103E/CH | Microchip Technology Inc | Check for Price | 10K DIGITAL POTENTIOMETER, INCREMENT/DECREMENT CONTROL INTERFACE, 64 POSITIONS, PDSO6, PLASTIC, SC-74A, SOT-23, 6 PIN | MCP4011T-103E/MC vs MCP4023-103E/CH |
MCP4014-103E/OT | Microchip Technology Inc | Check for Price | 10K DIGITAL POTENTIOMETER, INCREMENT/DECREMENT CONTROL INTERFACE, 64 POSITIONS, PDSO5, PLASTIC, SC-74A, SOT-23, 5 PIN | MCP4011T-103E/MC vs MCP4014-103E/OT |
MCP4013-103E/CH | Microchip Technology Inc | Check for Price | 10K DIGITAL POTENTIOMETER, INCREMENT/DECREMENT CONTROL INTERFACE, 64 POSITIONS, PDSO6, PLASTIC, SC-74A, SOT-23, 6 PIN | MCP4011T-103E/MC vs MCP4013-103E/CH |
MCP4024-103E/OT | Microchip Technology Inc | Check for Price | 10K DIGITAL POTENTIOMETER, INCREMENT/DECREMENT CONTROL INTERFACE, 64 POSITIONS, PDSO5, PLASTIC, SC-74A, SOT-23, 5 PIN | MCP4011T-103E/MC vs MCP4024-103E/OT |
MCP4011T-103E/MC Frequently Asked Questions (FAQ)
-
The maximum voltage rating for the MCP4011T-103E/MC is 5.5V.
-
The MCP4011T-103E/MC can be interfaced with a microcontroller using a standard SPI (Serial Peripheral Interface) protocol.
-
The MCP4011T-103E/MC has a resolution of 7 bits, which means it can be set to one of 128 discrete positions.
-
Yes, the MCP4011T-103E/MC can be used as a rheostat (variable resistor) by connecting the wiper terminal to one of the end terminals.
-
The MCP4011T-103E/MC has a volatile wiper memory, which means that the wiper position is lost during power-down. To store the wiper position, you need to use an external non-volatile memory or implement a power-on default value.