Part Details for MB6S by Yangzhou Yangjie Electronics Co Ltd
Results Overview of MB6S by Yangzhou Yangjie Electronics Co Ltd
- Distributor Offerings: (1 listing)
- Number of FFF Equivalents: (6 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
MB6S Information
MB6S by Yangzhou Yangjie Electronics Co Ltd is a Bridge Rectifier Diode.
Bridge Rectifier Diodes are under the broader part category of Diodes.
A diode is a electrical part that can control the direction in which the current flows in a device. Consider factors like voltage drop, current capacity, reverse voltage, and operating frequency when selecting a diode. Read more about Diodes on our Diodes part category page.
Price & Stock for MB6S
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
MB6S-YAN
|
TME | Bridge rectifier: single-phase, 600V, If: 0.8A, Ifsm: 30A, MBS, SMT Min Qty: 5 | 0 |
|
$0.0390 / $0.1600 | RFQ |
Part Details for MB6S
MB6S CAD Models
MB6S Part Data Attributes
|
|
MB6S
Yangzhou Yangjie Electronics Co Ltd
Buy Now
Datasheet
|
Compare Parts:
MB6S
Yangzhou Yangjie Electronics Co Ltd
Bridge Rectifier Diode, 0.8A, 600V V(RRM),
|
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | YANGZHOU YANGJIE ELECTRONICS CO LTD | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| Configuration | BRIDGE, 4 ELEMENTS | |
| Diode Element Material | SILICON | |
| Diode Type | BRIDGE RECTIFIER DIODE | |
| Forward Voltage-Max (VF) | 1 V | |
| Non-rep Pk Forward Current-Max | 30 A | |
| Number of Elements | 4 | |
| Number of Phases | 1 | |
| Operating Temperature-Max | 150 °C | |
| Output Current-Max | 0.5 A | |
| Rep Pk Reverse Voltage-Max | 600 V | |
| Surface Mount | YES |
Alternate Parts for MB6S
This table gives cross-reference parts and alternative options found for MB6S. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of MB6S, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| MB6S-E3/80 | Vishay Semiconductors | Check for Price | Diode Rectifier Bridge Single 600V 0.8A 4-Pin TO-269AA T/R | MB6S vs MB6S-E3/80 |
| MB6S-E3 | Vishay Intertechnologies | Check for Price | Bridge Rectifier Diode, 1 Phase, 0.5A, 600V V(RRM), Silicon, TO-269AA, LEAD FREE, MINIATURE, PLASTIC, MBS, 4 PIN | MB6S vs MB6S-E3 |
| MB6S-E3 | Vishay Semiconductors | Check for Price | DIODE 0.5 A, 600 V, SILICON, BRIDGE RECTIFIER DIODE, TO-269AA, LEAD FREE, MINIATURE, PLASTIC, MBS, 4 PIN, Bridge Rectifier Diode | MB6S vs MB6S-E3 |
| B6S | Surge Components Inc | Check for Price | Bridge Rectifier Diode, | MB6S vs B6S |
| MB6S-E3/45 | Vishay Semiconductors | Check for Price | Diode Rectifier Bridge Single 600V 0.8A 4-Pin TO-269AA Tube | MB6S vs MB6S-E3/45 |
| B6S | HY Electronic Corp | Check for Price | Bridge Rectifier Diode | MB6S vs B6S |
MB6S Frequently Asked Questions (FAQ)
-
The recommended PCB layout involves placing the MB6S near the power source, using a solid ground plane, and keeping the input and output traces separate. For thermal management, ensure good airflow, use a heat sink if necessary, and keep the ambient temperature below 40°C.
-
To ensure EMC, use a metal shield around the MB6S, keep the input and output cables away from each other, and use a common-mode choke or ferrite bead on the input lines. Also, follow the recommended PCB layout and grounding scheme.
-
The maximum allowable ripple current for the MB6S is typically 30% of the rated output current. Exceeding this value may reduce the lifespan of the module or cause it to malfunction.
-
While the MB6S is designed to withstand some vibration, it's essential to ensure that the module is securely fastened to the PCB and that the PCB is properly mounted to the chassis. Excessive vibration may still cause reliability issues or damage to the module.
-
To troubleshoot issues with the MB6S, check the input voltage, output load, and ambient temperature. Verify that the module is properly installed and that the PCB layout and thermal management are correct. Consult the datasheet and application notes for specific troubleshooting guidelines.