Part Details for MB10S by Yangzhou Yangjie Electronics Co Ltd
Results Overview of MB10S by Yangzhou Yangjie Electronics Co Ltd
- Distributor Offerings: (1 listing)
- Number of FFF Equivalents: (2 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
MB10S Information
MB10S by Yangzhou Yangjie Electronics Co Ltd is a Bridge Rectifier Diode.
Bridge Rectifier Diodes are under the broader part category of Diodes.
A diode is a electrical part that can control the direction in which the current flows in a device. Consider factors like voltage drop, current capacity, reverse voltage, and operating frequency when selecting a diode. Read more about Diodes on our Diodes part category page.
Price & Stock for MB10S
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
MB10S-YAN
|
TME | Bridge rectifier: single-phase, 1kV, If: 0.8A, Ifsm: 30A, MBS, SMT Min Qty: 5 | 1255 |
|
$0.0479 / $0.1600 | Buy Now |
Part Details for MB10S
MB10S CAD Models
MB10S Part Data Attributes
|
|
MB10S
Yangzhou Yangjie Electronics Co Ltd
Buy Now
Datasheet
|
Compare Parts:
MB10S
Yangzhou Yangjie Electronics Co Ltd
Bridge Rectifier Diode, 0.8A, 1000V V(RRM),
|
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | YANGZHOU YANGJIE ELECTRONICS CO LTD | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| Configuration | BRIDGE, 4 ELEMENTS | |
| Diode Element Material | SILICON | |
| Diode Type | BRIDGE RECTIFIER DIODE | |
| Forward Voltage-Max (VF) | 1 V | |
| Non-rep Pk Forward Current-Max | 30 A | |
| Number of Elements | 4 | |
| Number of Phases | 1 | |
| Operating Temperature-Max | 150 °C | |
| Output Current-Max | 0.5 A | |
| Rep Pk Reverse Voltage-Max | 1000 V | |
| Surface Mount | YES |
Alternate Parts for MB10S
This table gives cross-reference parts and alternative options found for MB10S. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of MB10S, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| MB10S | Micro Commercial Components | Check for Price | Bridge Rectifier Diode, 1 Phase, 0.5A, 1000V V(RRM), Silicon, PLASTIC, MBS-1, 4 PIN | MB10S vs MB10S |
| MB10S-TP-HF | Micro Commercial Components | Check for Price | Bridge Rectifier Diode, 0.8A, 1000V V(RRM), | MB10S vs MB10S-TP-HF |
MB10S Frequently Asked Questions (FAQ)
-
The recommended PCB layout involves placing the MB10S near the edge of the board to ensure good airflow. A thermal pad or heat sink is recommended to dissipate heat. A minimum of 2oz copper thickness and a 1-inch square copper pour on the bottom layer can help with heat dissipation.
-
To ensure reliable communication, use a stable power supply, ensure proper grounding, and use a UART interface with a baud rate of 9600-115200. Also, implement proper flow control and error handling mechanisms in your firmware.
-
The MB10S module can operate in a temperature range of -20°C to 85°C. However, it's recommended to operate within 0°C to 70°C for optimal performance and reliability.
-
The MB10S module is not designed for use in humid or high-moisture environments. It's recommended to use the module in a dry environment with a relative humidity of 60% or less to prevent damage or malfunction.
-
To troubleshoot common issues, check the power supply, UART interface, and baud rate settings. Ensure proper grounding and shielding of the module. Also, verify the firmware and software implementation for any errors or bugs.