Part Details for MAX4200ESA+ by Maxim Integrated Products
Results Overview of MAX4200ESA+ by Maxim Integrated Products
- Distributor Offerings: (1 listing)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (4 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Education and Research
Environmental Monitoring
Internet of Things (IoT)
Industrial Automation
Computing and Data Storage
Aerospace and Defense
Healthcare
Agriculture Technology
Medical Imaging
Telecommunications
Automotive
MAX4200ESA+ Information
MAX4200ESA+ by Maxim Integrated Products is a Buffer Amplifier.
Buffer Amplifiers are under the broader part category of Amplifier Circuits.
Amplifier circuits use external power to increase the amplitude of an input signal. They can be used to perform linear amplifications or logarithmic functions. Read more about Amplifier Circuits on our Amplifier Circuits part category page.
Price & Stock for MAX4200ESA+
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
MAX4200ESA+-ND
|
DigiKey | IC BUFFER 1 CIRCUIT 8SOIC Min Qty: 1 Lead time: 10 Weeks Container: Tube | Temporarily Out of Stock |
|
$2.0602 / $3.8000 | Buy Now |
Part Details for MAX4200ESA+
MAX4200ESA+ CAD Models
MAX4200ESA+ Part Data Attributes
|
|
MAX4200ESA+
Maxim Integrated Products
Buy Now
Datasheet
|
Compare Parts:
MAX4200ESA+
Maxim Integrated Products
Buffer Amplifier, 1 Func, BIPolar, PDSO8, SO-8
|
| Pbfree Code | Yes | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Transferred | |
| Ihs Manufacturer | MAXIM INTEGRATED PRODUCTS INC | |
| Part Package Code | SOIC | |
| Package Description | SO-8 | |
| Pin Count | 8 | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 | |
| Amplifier Type | BUFFER | |
| Average Bias Current-Max (IIB) | 10 µA | |
| Bandwidth (3dB)-Nom | 660 MHz | |
| Bias Current-Max (IIB) @25C | 10 µA | |
| Input Offset Voltage-Max | 15000 µV | |
| JESD-30 Code | R-PDSO-G8 | |
| JESD-609 Code | e3 | |
| Length | 4.9 mm | |
| Moisture Sensitivity Level | 1 | |
| Neg Supply Voltage Limit-Max | -6 V | |
| Neg Supply Voltage-Nom (Vsup) | -5 V | |
| Number of Functions | 1 | |
| Number of Terminals | 8 | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | SOP | |
| Package Equivalence Code | SOP8,.25 | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE | |
| Peak Reflow Temperature (Cel) | 260 | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 1.75 mm | |
| Slew Rate-Nom | 4200 V/us | |
| Supply Current-Max | 4 mA | |
| Supply Voltage Limit-Max | 6 V | |
| Supply Voltage-Nom (Vsup) | 5 V | |
| Surface Mount | YES | |
| Technology | BIPOLAR | |
| Temperature Grade | INDUSTRIAL | |
| Terminal Finish | MATTE TIN | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 1.27 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 30 | |
| Width | 3.9 mm |
Alternate Parts for MAX4200ESA+
This table gives cross-reference parts and alternative options found for MAX4200ESA+. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of MAX4200ESA+, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| MAX4200ESA+T | Maxim Integrated Products | Check for Price | Buffer Amplifier, 1 Func, BIPolar, PDSO8, SO-8 | MAX4200ESA+ vs MAX4200ESA+T |
| MAX4200ESA+T | Analog Devices Inc | Check for Price | Ultra-High-Speed, Low-Noise, Low-Power, SOT23 Open-Loop Buffers, 8-SOIC_N-150_MIL, 8 Pins, -40 to 85C | MAX4200ESA+ vs MAX4200ESA+T |
| MAX4200ESA | Maxim Integrated Products | Check for Price | Buffer Amplifier, 1 Func, BIPolar, PDSO8, SO-8 | MAX4200ESA+ vs MAX4200ESA |
| MAX4200ESA-T | Maxim Integrated Products | Check for Price | Buffer Amplifier, 1 Func, BIPolar, PDSO8, SO-8 | MAX4200ESA+ vs MAX4200ESA-T |
MAX4200ESA+ Frequently Asked Questions (FAQ)
-
A good PCB layout for the MAX4200ESA+ involves keeping the input and output traces separate, using a solid ground plane, and placing the device close to the input signal source. Additionally, it's recommended to use a low-ESR capacitor for the bypass capacitor (C1) and to keep the power supply traces as short as possible.
-
The values of R1 and R2 can be calculated using the formulas provided in the datasheet. For a desired gain (G) and bandwidth (BW), R1 and R2 can be calculated as R1 = (G * R2) / (G - 1) and R2 = (1 / (2 * π * BW * C1)), where C1 is the value of the bypass capacitor.
-
The maximum input voltage that the MAX4200ESA+ can handle is ±15V. Exceeding this voltage can damage the device. It's recommended to use input voltage limiting resistors or a voltage limiter circuit to protect the device from overvoltage conditions.
-
The MAX4200ESA+ is specified to operate from -40°C to +85°C. To ensure operation within this range, it's recommended to provide adequate heat sinking, avoid high-power dissipation, and use a thermally conductive material for the PCB. Additionally, it's recommended to monitor the device temperature and take corrective action if it exceeds the specified range.
-
The recommended power-up sequence for the MAX4200ESA+ is to apply the power supply voltage (VCC) before applying the input signal. This ensures that the device is properly biased and configured before the input signal is applied.