Part Details for MAX3085CSA+T by Analog Devices Inc
Results Overview of MAX3085CSA+T by Analog Devices Inc
- Distributor Offerings: (2 listings)
- Number of FFF Equivalents: (9 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
MAX3085CSA+T Information
MAX3085CSA+T by Analog Devices Inc is a Line Driver or Receiver.
Line Driver or Receivers are under the broader part category of Drivers And Interfaces.
A driver controls the current or voltage delivered to components like LCDs or motors, while an interface component connects systems for data transfer and control. Read more about Drivers And Interfaces on our Drivers And Interfaces part category page.
Price & Stock for MAX3085CSA+T
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
700-MAX3085CSAT
|
Mouser Electronics | RS-422/RS-485 Interface IC Fail-Safe, High-Speed (10Mbps), Slew-Rat RoHS: Compliant | 0 |
|
$2.6100 / $4.7400 | Order Now |
|
|
Analog Devices Inc | Fail-Safe, High-Speed (10Mbps) Min Qty: 1 Package Multiple: 1 | 164 |
|
$2.6198 / $4.7400 | Buy Now |
Part Details for MAX3085CSA+T
MAX3085CSA+T CAD Models
MAX3085CSA+T Part Data Attributes
|
|
MAX3085CSA+T
Analog Devices Inc
Buy Now
Datasheet
|
Compare Parts:
MAX3085CSA+T
Analog Devices Inc
Fail-Safe, High-Speed (10Mbps), Slew-Rate-Limited RS-485/RS-422 Transceivers, 8-SOIC_N-150_MIL, 8 Pins, 0 to 70C
|
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | ANALOG DEVICES INC | |
| Part Package Code | 8-SOIC_N-150_MIL | |
| Package Description | SO-8 | |
| Pin Count | 8 | |
| Manufacturer Package Code | 8-SOIC_N-150_MIL | |
| Reach Compliance Code | compliant | |
| Date Of Intro | 1996-09-23 | |
| Samacsys Manufacturer | Analog Devices | |
| Differential Output | YES | |
| Driver Number of Bits | 1 | |
| High Level Input Current-Max | 0.000125 A | |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER | |
| Interface IC Type | LINE TRANSCEIVER | |
| Interface Standard | EIA-422; EIA-485 | |
| JESD-30 Code | R-PDSO-G8 | |
| JESD-609 Code | e3 | |
| Length | 4.9 mm | |
| Moisture Sensitivity Level | 1 | |
| Number of Functions | 1 | |
| Number of Terminals | 8 | |
| Operating Temperature-Max | 70 °C | |
| Operating Temperature-Min | ||
| Out Swing-Min | 2 V | |
| Output Low Current-Max | 0.004 A | |
| Output Polarity | COMPLEMENTARY | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | SOP | |
| Package Equivalence Code | SOP8,.25 | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE | |
| Peak Reflow Temperature (Cel) | 260 | |
| Qualification Status | Not Qualified | |
| Receive Delay-Max | 200 ns | |
| Receiver Number of Bits | 1 | |
| Seated Height-Max | 1.75 mm | |
| Supply Current-Max | 1 mA | |
| Supply Voltage-Max | 5.25 V | |
| Supply Voltage-Min | 4.75 V | |
| Supply Voltage-Nom | 5 V | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Temperature Grade | COMMERCIAL | |
| Terminal Finish | Matte Tin (Sn) | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 1.27 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 30 | |
| Transmit Delay-Max | 1000 ns | |
| Width | 3.9 mm |
Alternate Parts for MAX3085CSA+T
This table gives cross-reference parts and alternative options found for MAX3085CSA+T. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of MAX3085CSA+T, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| SN75176BDRG4 | Texas Instruments | $0.5671 | Differential bus transceiver 8-SOIC 0 to 70 | MAX3085CSA+T vs SN75176BDRG4 |
| THVD1520DR | Texas Instruments | $0.5875 | 5-V RS-485 transceiver up to 10 Mbps with ±8-kV IEC ESD protection 8-SOIC -40 to 125 | MAX3085CSA+T vs THVD1520DR |
| ADM485ARZ-REEL | Analog Devices Inc | $1.0312 | 5 V, Low Power, 5 Mbps, Half Duplex EIA RS-485 Transceiver | MAX3085CSA+T vs ADM485ARZ-REEL |
| LTC1485IS8#TRPBF | Analog Devices Inc | $5.7771 | Differential Bus Transceiver | MAX3085CSA+T vs LTC1485IS8#TRPBF |
| LMS1485IM | Texas Instruments | Check for Price | LINE TRANSCEIVER | MAX3085CSA+T vs LMS1485IM |
| ADM1485AR-REEL | Analog Devices Inc | Check for Price | 5 V, High Speed (30 Mbps), Low Power, Half Duplex EIA RS-485 Transceiver | MAX3085CSA+T vs ADM1485AR-REEL |
| DS75176BTMX/NOPB | Texas Instruments | Check for Price | Multipoint RS-485/RS-422 Transceivers 8-SOIC -40 to 85 | MAX3085CSA+T vs DS75176BTMX/NOPB |
| TL3695DRG4 | Texas Instruments | Check for Price | Differential Bus Transceiver 8-SOIC 0 to 70 | MAX3085CSA+T vs TL3695DRG4 |
| LMS485IM | National Semiconductor Corporation | Check for Price | IC LINE TRANSCEIVER, PDSO8, SOIC-8, Line Driver or Receiver | MAX3085CSA+T vs LMS485IM |
MAX3085CSA+T Frequently Asked Questions (FAQ)
-
A good PCB layout practice for the MAX3085CSA+T is to keep the signal traces short and away from the power traces, use a solid ground plane, and add decoupling capacitors close to the device. Additionally, it's recommended to use a shielded cable for the RS-485 bus and to keep the cable length as short as possible.
-
To ensure reliable communication in a noisy industrial environment, use a shielded cable, implement error-checking mechanisms such as CRC or checksum, and consider using a repeater or an isolator to boost the signal and provide electrical isolation. Additionally, ensure that the MAX3085CSA+T is properly terminated and that the bus is properly biased.
-
The maximum cable length supported by the MAX3085CSA+T depends on the data rate and the cable characteristics. As a general rule, the maximum cable length is approximately 1000 meters at 100 kbps, 500 meters at 500 kbps, and 200 meters at 1 Mbps. However, it's recommended to consult the datasheet and perform tests to determine the maximum cable length for a specific application.
-
The MAX3085CSA+T can be configured for half-duplex or full-duplex operation by controlling the DE (driver enable) and RE (receiver enable) pins. For half-duplex operation, tie the DE pin to the RE pin, and for full-duplex operation, tie the DE pin to VCC and the RE pin to GND. Consult the datasheet for more information on the pin configurations.
-
The typical power consumption of the MAX3085CSA+T is around 15 mA at 5 V supply voltage, but it can vary depending on the data rate, cable length, and other factors. Consult the datasheet for more information on the power consumption and power-down modes.