Part Details for MAX2751EUA+ by Maxim Integrated Products
Results Overview of MAX2751EUA+ by Maxim Integrated Products
- Distributor Offerings: (2 listings)
- Number of FFF Equivalents: (1 replacement)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (1 option)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Consumer Electronics
Telecommunications
Communication and Networking
MAX2751EUA+ Information
MAX2751EUA+ by Maxim Integrated Products is a Voltage Controlled Oscillator.
Voltage Controlled Oscillators are under the broader part category of Oscillators.
Oscillators are electronic components that produce sine or square waves in order to convert signals. Read more about Oscillators on our Oscillators part category page.
Price & Stock for MAX2751EUA+
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
MAX2751EUA+-ND
|
DigiKey | IC OSC VOLT CNTRL 8-UMAX Min Qty: 1 Lead time: 10 Weeks Container: Tube |
169 In Stock |
|
$2.8707 / $4.3400 | Buy Now |
|
|
Cytech Systems Limited | IC OSC VOLT CNTRL 8-UMAX | 100 |
|
RFQ |
Part Details for MAX2751EUA+
MAX2751EUA+ CAD Models
MAX2751EUA+ Part Data Attributes
|
|
MAX2751EUA+
Maxim Integrated Products
Buy Now
Datasheet
|
Compare Parts:
MAX2751EUA+
Maxim Integrated Products
Voltage Controlled Oscillator, 2120MHz Min, 2260MHz Max,
|
| Pbfree Code | Yes | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Transferred | |
| Ihs Manufacturer | MAXIM INTEGRATED PRODUCTS INC | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 | |
| Control Voltage-Max | 2.4 V | |
| Control Voltage-Min | 0.4 V | |
| JESD-609 Code | e3 | |
| Modulation Sensitivity | 175 MHz/V | |
| Mounting Feature | SURFACE MOUNT | |
| Offset Frequency | 4000 kHz | |
| Operating Frequency-Max | 2260 MHz | |
| Operating Frequency-Min | 2120 MHz | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| Oscillator Type | VOLTAGE CONTROLLED OSCILLATOR | |
| Output Power | -3 dBm | |
| Phase Noise | -125 dBc/Hz | |
| Physical Dimension | 3.05mm x 3.05mm x 1.1mm | |
| Supply Current-Max | 15.9 mA | |
| Supply Voltage-Nom | 3 V | |
| Surface Mount | YES | |
| Terminal Finish | MATTE TIN |
Alternate Parts for MAX2751EUA+
This table gives cross-reference parts and alternative options found for MAX2751EUA+. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of MAX2751EUA+, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| MAX2751EUA | Maxim Integrated Products | Check for Price | Voltage Controlled Oscillator, 2120MHz Min, 2260MHz Max | MAX2751EUA+ vs MAX2751EUA |
MAX2751EUA+ Frequently Asked Questions (FAQ)
-
The recommended PCB layout for the MAX2751EUA+ is to keep the input and output traces as short as possible, and to use a solid ground plane to reduce noise and EMI. Additionally, it's recommended to place a 0.1uF bypass capacitor between the VCC pin and GND pin, and to use a 1uF capacitor between the VIN pin and GND pin.
-
To ensure the MAX2751EUA+ is stable and doesn't oscillate, make sure to follow the recommended PCB layout, use a sufficient decoupling capacitor, and ensure that the input voltage is within the recommended range. Additionally, it's recommended to add a small resistor (e.g. 10Ω) in series with the output capacitor to prevent oscillation.
-
The maximum input voltage that the MAX2751EUA+ can handle is 18V. However, it's recommended to operate the device within the recommended input voltage range of 4.5V to 16V to ensure reliable operation and to prevent damage to the device.
-
The MAX2751EUA+ is rated for operation up to 125°C. However, it's recommended to derate the device's performance and ensure that the device is properly heat-sinked to prevent overheating. Additionally, it's recommended to consult the datasheet and application notes for specific guidance on operating the device in high-temperature environments.
-
To troubleshoot issues with the MAX2751EUA+, start by checking the input voltage and ensuring that it's within the recommended range. Next, check the output voltage and ensure that it's within the expected range. If the issue persists, check the PCB layout and ensure that it's following the recommended layout. Finally, consult the datasheet and application notes for specific guidance on troubleshooting common issues.