-
Part Symbol
-
Footprint
-
3D Model
Available Download Formats
By downloading CAD models, you agree to our Terms & Conditions and Privacy Policy
Part Details for MAX1480AEPI+ by Analog Devices Inc
Results Overview of MAX1480AEPI+ by Analog Devices Inc
- Distributor Offerings: (4 listings)
- Number of FFF Equivalents: (1 replacement)
- CAD Models: (Available)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
MAX1480AEPI+ Information
MAX1480AEPI+ by Analog Devices Inc is a Line Driver or Receiver.
Line Driver or Receivers are under the broader part category of Drivers And Interfaces.
A driver controls the current or voltage delivered to components like LCDs or motors, while an interface component connects systems for data transfer and control. Read more about Drivers And Interfaces on our Drivers And Interfaces part category page.
Price & Stock for MAX1480AEPI+
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
81Y6477
|
Newark | Tx Rx, Half Duplex, 85Deg C, Dip-28, Ic Type:Isolated Rs422/Rs485 Transceiver, No. Of Receivers:1Receivers, No. Of Transmitters:1, Communication Mode:Half Duplex, Data Rate Max:2.5Mbps, Supply Voltage Min:4.5V, No. Of Pins:28Pins Rohs Compliant: Yes |Analog Devices MAX1480AEPI+ RoHS: Compliant Min Qty: 1 Package Multiple: 1 Date Code: 1 Container: Bulk | 0 |
|
$35.0100 / $48.0500 | Buy Now |
|
DISTI #
700-MAX1480AEPI
|
Mouser Electronics | RS-422/RS-485 Interface IC Complete, Isolated RS-485/RS-422 Data In RoHS: Compliant | 107 |
|
$36.5100 / $52.1600 | Buy Now |
|
|
Analog Devices Inc | Complete, Isolated RS-485/RS-4 Package Multiple: 1 | 0 |
|
$28.0100 / $48.0500 | Buy Now |
|
DISTI #
MAX1480AEPI+
|
TME | IC: interface, transceiver, half duplex,RS422,RS485, 2.5Mbps Min Qty: 1 | 0 |
|
$31.8000 / $40.1000 | RFQ |
Part Details for MAX1480AEPI+
MAX1480AEPI+ CAD Models
MAX1480AEPI+ Part Data Attributes
|
|
MAX1480AEPI+
Analog Devices Inc
Buy Now
Datasheet
|
Compare Parts:
MAX1480AEPI+
Analog Devices Inc
Complete, Isolated RS-485/RS-422 Data Interface, 28-PDIP-600_MIL, 28 Pins, -40 to 85C
|
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | ANALOG DEVICES INC | |
| Part Package Code | 28-PDIP-600_MIL | |
| Package Description | 0.600 INCH, PLASTIC, DIP-28 | |
| Pin Count | 28 | |
| Manufacturer Package Code | 28-PDIP-600_MIL | |
| Reach Compliance Code | compliant | |
| Date Of Intro | 1999-05-27 | |
| Samacsys Manufacturer | Analog Devices | |
| Additional Feature | COMMON I/O; ISOLATED DATA INTERFACE | |
| Differential Output | YES | |
| Driver Number of Bits | 1 | |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER | |
| Interface IC Type | LINE TRANSCEIVER | |
| Interface Standard | EIA-422; EIA-485 | |
| JESD-30 Code | R-PDIP-T28 | |
| JESD-609 Code | e3 | |
| Length | 36.83 mm | |
| Moisture Sensitivity Level | 1 | |
| Number of Functions | 1 | |
| Number of Terminals | 28 | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| Out Swing-Min | 1.5 V | |
| Output Polarity | COMPLEMENTARY | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | DIP | |
| Package Equivalence Code | DIP28,.6 | |
| Package Shape | RECTANGULAR | |
| Package Style | IN-LINE | |
| Qualification Status | Not Qualified | |
| Receive Delay-Max | 225 ns | |
| Receiver Number of Bits | 1 | |
| Seated Height-Max | 5.08 mm | |
| Supply Current-Max | 90 mA | |
| Supply Voltage-Max | 5.5 V | |
| Supply Voltage-Min | 4.5 V | |
| Supply Voltage-Nom | 5 V | |
| Surface Mount | NO | |
| Technology | CMOS | |
| Temperature Grade | INDUSTRIAL | |
| Terminal Finish | Matte Tin (Sn) | |
| Terminal Form | THROUGH-HOLE | |
| Terminal Pitch | 2.54 mm | |
| Terminal Position | DUAL | |
| Transmit Delay-Max | 275 ns | |
| Width | 15.24 mm |
Alternate Parts for MAX1480AEPI+
This table gives cross-reference parts and alternative options found for MAX1480AEPI+. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of MAX1480AEPI+, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| MAX1480ACPI+ | Maxim Integrated Products | Check for Price | Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, CMOS, PDIP28, 0.600 INCH, PLASTIC, DIP-28 | MAX1480AEPI+ vs MAX1480ACPI+ |
MAX1480AEPI+ Frequently Asked Questions (FAQ)
-
A good layout and routing for the MAX1480AEPI+ involves keeping the analog and digital grounds separate, using a solid ground plane, and minimizing the length of the traces between the IC and the power supply. It's also recommended to use a 4-layer PCB with a dedicated power plane and a dedicated ground plane.
-
To ensure the MAX1480AEPI+ is properly powered and decoupled, use a high-quality power supply with low ripple and noise, and add decoupling capacitors (e.g., 10uF and 100nF) as close as possible to the IC's power pins. Also, use a 0.1uF capacitor between the VCC and GND pins.
-
The MAX1480AEPI+ can achieve data rates of up to 100 Mbps, but the actual data rate may vary depending on the specific application, cable length, and noise environment.
-
To troubleshoot common issues with the MAX1480AEPI+, check the power supply voltage, ensure proper termination and cabling, and verify the transmit and receive data lines. Use an oscilloscope to check the signal integrity and timing. Also, review the datasheet and application notes for specific troubleshooting guidelines.
-
Yes, the MAX1480AEPI+ can be used in a hot-swap or hot-plug application, but it's essential to ensure that the power supply is properly sequenced and that the IC is properly powered down before the hot-swap or hot-plug event.