Part Details for LTC4260CUH by Analog Devices Inc
Results Overview of LTC4260CUH by Analog Devices Inc
- Distributor Offerings: (1 listing)
- Number of FFF Equivalents: (2 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
LTC4260CUH Information
LTC4260CUH by Analog Devices Inc is a Power Management Circuit.
Power Management Circuits are under the broader part category of Power Circuits.
A power circuit delivers electricity in order to operate a load for an electronic device. Power circuits include transformers, generators and switches. Read more about Power Circuits on our Power Circuits part category page.
Price & Stock for LTC4260CUH
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Vyrian | Peripheral ICs | 321 |
|
RFQ |
Part Details for LTC4260CUH
LTC4260CUH CAD Models
LTC4260CUH Part Data Attributes
|
|
LTC4260CUH
Analog Devices Inc
Buy Now
Datasheet
|
Compare Parts:
LTC4260CUH
Analog Devices Inc
Power Supply Support Circuit, Fixed, 1 Channel, CMOS, PQCC32
|
| Rohs Code | No | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | ANALOG DEVICES INC | |
| Package Description | 5 X 5 MM, PLASTIC, QFN-32 | |
| Reach Compliance Code | not_compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 | |
| Samacsys Manufacturer | Analog Devices | |
| Adjustable Threshold | NO | |
| Analog IC - Other Type | HOT SWAP CONTROLLER | |
| JESD-30 Code | S-PQCC-N32 | |
| JESD-609 Code | e0 | |
| Length | 5 mm | |
| Moisture Sensitivity Level | 1 | |
| Number of Channels | 1 | |
| Number of Functions | 1 | |
| Number of Terminals | 32 | |
| Operating Temperature-Max | 70 °C | |
| Operating Temperature-Min | ||
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | VQCCN | |
| Package Shape | SQUARE | |
| Package Style | CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 0.8 mm | |
| Supply Voltage-Max (Vsup) | 80 V | |
| Supply Voltage-Min (Vsup) | 8.5 V | |
| Supply Voltage-Nom (Vsup) | 48 V | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Temperature Grade | COMMERCIAL | |
| Terminal Finish | Tin/Lead (Sn/Pb) | |
| Terminal Form | NO LEAD | |
| Terminal Pitch | 0.5 mm | |
| Terminal Position | QUAD | |
| Width | 5 mm |
Alternate Parts for LTC4260CUH
This table gives cross-reference parts and alternative options found for LTC4260CUH. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of LTC4260CUH, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| LTC4260IUH#TRPBF | Linear Technology | Check for Price | LTC4260 - Positive High Voltage Hot Swap Controller with I2C Compatible Monitoring; Package: QFN; Pins: 32; Temperature Range: -40°C to 85°C | LTC4260CUH vs LTC4260IUH#TRPBF |
| LTC4260IUH#TR | Analog Devices Inc | Check for Price | Power Supply Support Circuit, Fixed, 1 Channel, PQCC32 | LTC4260CUH vs LTC4260IUH#TR |
LTC4260CUH Frequently Asked Questions (FAQ)
-
The maximum current that can be drawn from the VCC pin is 100mA, as specified in the datasheet. However, it's recommended to keep the current below 50mA to ensure reliable operation.
-
To prevent latch-up during power-up, ensure that the VCC pin is powered up before the VS pin. Also, add a 1uF capacitor between the VCC pin and GND to filter out any noise.
-
The FAULT pin is an open-drain output that indicates a fault condition, such as overcurrent or undervoltage. You can connect this pin to a microcontroller or other logic circuit to detect and respond to faults. Pull the pin up to a voltage source with a 1kΩ to 10kΩ resistor.
-
Yes, the LTC4260CUH can operate with a supply voltage from 2.7V to 5.5V. However, the maximum current rating and other specifications may vary depending on the supply voltage. Refer to the datasheet for specific details.
-
The overcurrent threshold can be adjusted by connecting a resistor (RILIM) between the ILIM pin and GND. The threshold current is inversely proportional to the value of RILIM. Refer to the datasheet for the calculation formula and recommended values.