Part Details for LTC2292IUP#PBF by Analog Devices Inc
Results Overview of LTC2292IUP#PBF by Analog Devices Inc
- Distributor Offerings: (5 listings)
- Number of FFF Equivalents: (7 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
LTC2292IUP#PBF Information
LTC2292IUP#PBF by Analog Devices Inc is an Analog to Digital Converter.
Analog to Digital Converters are under the broader part category of Converters.
A converter is an electrical circuit that transforms electric energy into a different form that will support a elecrical load needed by a device. Read more about Converters on our Converters part category page.
Price & Stock for LTC2292IUP#PBF
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
50AK2324
|
Newark | Adc, 12-Bit, 40Msps, Qfn-64, Resolution (Bits):12Bit, Sampling Rate:40Msps, Input Channel Type:Differential, Data Interface:Parallel, Supply Voltage Type:Single, Supply Voltage Min:2.7V, Supply Voltage Max:3.4V, No. Of Pins:64Pins Rohs Compliant: Yes |Analog Devices LTC2292IUP#PBF RoHS: Compliant Min Qty: 1 Package Multiple: 1 Date Code: 1 Container: Bulk | 25 |
|
$27.2800 / $31.5600 | Buy Now |
|
DISTI #
505-LTC2292IUP#PBF-ND
|
DigiKey | IC ADC 12BIT PIPELINED 64QFN Min Qty: 1 Lead time: 13 Weeks Container: Tube |
458 In Stock |
|
$25.3380 / $31.5600 | Buy Now |
|
DISTI #
584-LTC2292IUP#PBF
|
Mouser Electronics | Analog to Digital Converters - ADC 2x 12-B, 40Msps L Pwr 3V ADCs RoHS: Compliant | 34 |
|
$25.3300 / $31.7500 | Buy Now |
|
|
Analog Devices Inc | 2x 12-B, 40Msps L Pwr 3V ADCs Package Multiple: 40 | 5092 |
|
$20.2700 / $31.5600 | Buy Now |
|
DISTI #
LTC2292IUP#PBF
|
Richardson RFPD | CONVERTER - ADC RoHS: Compliant Min Qty: 40 | 0 |
|
$26.1700 / $30.4100 | Buy Now |
Part Details for LTC2292IUP#PBF
LTC2292IUP#PBF CAD Models
LTC2292IUP#PBF Part Data Attributes
|
|
LTC2292IUP#PBF
Analog Devices Inc
Buy Now
Datasheet
|
Compare Parts:
LTC2292IUP#PBF
Analog Devices Inc
Dual 12-Bit, 40Msps Low Power 3V ADCs
|
| Pbfree Code | No | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | ANALOG DEVICES INC | |
| Pin Count | 64 | |
| Manufacturer Package Code | 05-08-1705 | |
| Reach Compliance Code | compliant | |
| HTS Code | 8542.39.00.01 | |
| Samacsys Manufacturer | Analog Devices | |
| Analog Input Voltage-Max | 1 V | |
| Analog Input Voltage-Min | -0.5 V | |
| Converter Type | ADC, PIPELINED | |
| JESD-30 Code | S-PQCC-N64 | |
| JESD-609 Code | e3 | |
| Length | 9 mm | |
| Linearity Error-Max (EL) | 0.0342% | |
| Moisture Sensitivity Level | 1 | |
| Number of Analog In Channels | 1 | |
| Number of Bits | 12 | |
| Number of Functions | 2 | |
| Number of Terminals | 64 | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| Output Bit Code | OFFSET BINARY, 2'S COMPLEMENT BINARY | |
| Output Format | PARALLEL, WORD | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | HVQCCN | |
| Package Equivalence Code | LCC64,.35SQ,20 | |
| Package Shape | SQUARE | |
| Package Style | CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE | |
| Peak Reflow Temperature (Cel) | 260 | |
| Qualification Status | Not Qualified | |
| Sample Rate | 40 MHz | |
| Sample and Hold / Track and Hold | SAMPLE | |
| Seated Height-Max | 0.8 mm | |
| Supply Voltage-Nom | 3 V | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Temperature Grade | INDUSTRIAL | |
| Terminal Finish | Matte Tin (Sn) | |
| Terminal Form | NO LEAD | |
| Terminal Pitch | 0.5 mm | |
| Terminal Position | QUAD | |
| Time@Peak Reflow Temperature-Max (s) | 30 | |
| Width | 9 mm |
Alternate Parts for LTC2292IUP#PBF
This table gives cross-reference parts and alternative options found for LTC2292IUP#PBF. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of LTC2292IUP#PBF, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| LTC2292CUP#PBF | Analog Devices Inc | $18.5599 | Dual 12-Bit, 40Msps Low Power 3V ADCs | LTC2292IUP#PBF vs LTC2292CUP#PBF |
| LTC2292IUP | Analog Devices Inc | Check for Price | ADC, Proprietary Method, 12-Bit, 2 Func, 1 Channel, Parallel, Word Access, CMOS, PQCC64 | LTC2292IUP#PBF vs LTC2292IUP |
| LTC2292IUP#PBF | Linear Technology | Check for Price | LTC2292 - Dual 12-Bit, 40Msps Low Power 3V ADCs; Package: QFN; Pins: 64; Temperature Range: -40°C to 85°C | LTC2292IUP#PBF vs LTC2292IUP#PBF |
| LTC2292IUP#TRPBF | Linear Technology | Check for Price | LTC2292 - Dual 12-Bit, 40Msps Low Power 3V ADCs; Package: QFN; Pins: 64; Temperature Range: -40°C to 85°C | LTC2292IUP#PBF vs LTC2292IUP#TRPBF |
| LTC2292CUP#TR | Analog Devices Inc | Check for Price | ADC, Proprietary Method, 12-Bit, 2 Func, 1 Channel, Parallel, Word Access, CMOS, PQCC64 | LTC2292IUP#PBF vs LTC2292CUP#TR |
| LTC2292CUP#TR | Linear Technology | Check for Price | LTC2292 - Dual 12-Bit, 40Msps Low Power 3V ADCs; Package: QFN; Pins: 64; Temperature Range: 0°C to 70°C | LTC2292IUP#PBF vs LTC2292CUP#TR |
| LTC2292CUP | Linear Technology | Check for Price | LTC2292 - Dual 12-Bit, 40Msps Low Power 3V ADCs; Package: QFN; Pins: 64; Temperature Range: 0°C to 70°C | LTC2292IUP#PBF vs LTC2292CUP |
LTC2292IUP#PBF Frequently Asked Questions (FAQ)
-
A good PCB layout for the LTC2292 involves keeping the analog and digital grounds separate, using a solid ground plane, and minimizing the length of the traces between the ADC and the analog input pins. Additionally, it's recommended to use a low-ESR capacitor for the VCC pin and to decouple the VCC pin with a 0.1uF capacitor.
-
To ensure accurate conversion results, it's essential to follow proper PCB layout guidelines, use a high-quality analog input signal, and ensure that the analog input signal is within the specified range. Additionally, the LTC2292 requires a stable clock signal, so it's recommended to use a high-quality clock source or a crystal oscillator.
-
The maximum sampling rate of the LTC2292 is 125Msps. However, the actual sampling rate may be limited by the system's clock frequency, the analog input signal's bandwidth, and the system's overall noise performance.
-
Yes, the LTC2292 can be used with an external reference voltage. The external reference voltage should be connected to the REF pin, and the internal reference voltage should be disabled by connecting the REFIN pin to GND. The external reference voltage should be within the specified range of 1.2V to 1.3V.
-
The LTC2292 can be interfaced with a microcontroller or FPGA using a parallel interface. The ADC's output data is available on the D[11:0] pins, and the control signals such as CS, SCK, and SDI are used to control the ADC's operation. The interface protocol is SPI-compatible, making it easy to interface with most microcontrollers or FPGAs.