Part Details for LTC1563-3IGN#PBF by Analog Devices Inc
Results Overview of LTC1563-3IGN#PBF by Analog Devices Inc
- Distributor Offerings: (6 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (0 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
LTC1563-3IGN#PBF Information
LTC1563-3IGN#PBF by Analog Devices Inc is an Active Filter.
Active Filters are under the broader part category of Filters.
A filter is an electronic circuit that selectively allows certain frequencies to pass while attenuating others. They are used to extract desired signals and remove noise. Read more about Filters on our Filters part category page.
Price & Stock for LTC1563-3IGN#PBF
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
LTC1563-3IGN#PBF-ND
|
DigiKey | IC FILTER 256KHZ LOWPASS 16SSOP Min Qty: 1 Lead time: 10 Weeks Container: Tube |
88 In Stock |
|
$3.4000 / $8.0200 | Buy Now |
|
DISTI #
584-LTC1563-3IGN#PBF
|
Mouser Electronics | Active Filters Active RC, 4th Order Lpass Filt Fam RoHS: Compliant | 38 |
|
$3.5600 / $6.4600 | Buy Now |
|
|
Analog Devices Inc | Active RC, 4th Order Lpass Fil Package Multiple: 100 | 1318 |
|
$2.7200 / $8.0200 | Buy Now |
|
|
Rochester Electronics | LTC1563 - Active RC, 4th Order Lowpass Filter Family RoHS: Compliant Status: Active Min Qty: 1 | 356 |
|
$2.8600 / $3.5800 | Buy Now |
|
DISTI #
LTC1563-3IGNPBF
|
TME | Filter: digital, lowpass, SSOP16, 0.256MHz, Ch: 2 Min Qty: 1 | 0 |
|
$3.9000 / $4.9100 | RFQ |
|
DISTI #
LTC1563-3IGNPBF
|
Richardson RFPD | LINEAR ICS, OTHER RoHS: Compliant Min Qty: 100 | 0 |
|
$3.5100 / $3.8600 | Buy Now |
Part Details for LTC1563-3IGN#PBF
LTC1563-3IGN#PBF CAD Models
LTC1563-3IGN#PBF Part Data Attributes
|
|
LTC1563-3IGN#PBF
Analog Devices Inc
Buy Now
Datasheet
|
Compare Parts:
LTC1563-3IGN#PBF
Analog Devices Inc
Active RC, 4th Order Lowpass Filter Family
|
| Pbfree Code | No | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | ANALOG DEVICES INC | |
| Pin Count | 16 | |
| Manufacturer Package Code | 05-08-1641 (GN16) | |
| Reach Compliance Code | compliant | |
| Samacsys Manufacturer | Analog Devices | |
| Center or Cutoff Freq Rng-Max | 256 kHz | |
| Center or Cutoff Freq Rng-Min | 0.256 kHz | |
| JESD-30 Code | R-PDSO-G16 | |
| JESD-609 Code | e3 | |
| Length | 4.9 mm | |
| Moisture Sensitivity Level | 1 | |
| Number of Functions | 1 | |
| Number of Terminals | 16 | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | SSOP | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE, SHRINK PITCH | |
| Poles and Zeros | 4 AND 0 | |
| Qualification Status | Not Qualified | |
| Response | LOWPASS | |
| Seated Height-Max | 1.75 mm | |
| Supply Voltage-Max (Vsup) | 11 V | |
| Supply Voltage-Min (Vsup) | 2.7 V | |
| Supply Voltage-Nom (Vsup) | 4.75 V | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Temperature Grade | INDUSTRIAL | |
| Terminal Finish | Matte Tin (Sn) | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 0.635 mm | |
| Terminal Position | DUAL | |
| Transfer Characteristics | BESSEL | |
| Width | 3.899 mm |
LTC1563-3IGN#PBF Frequently Asked Questions (FAQ)
-
A good PCB layout for the LTC1563-3IGN#PBF involves keeping the analog and digital grounds separate, using a solid ground plane, and placing the device close to the analog signal sources. Additionally, it's recommended to use a low-ESR capacitor for the VCC pin and to keep the input and output traces short and away from noise sources.
-
The values of the external resistors and capacitors in the LTC1563-3IGN#PBF depend on the specific application and the desired filter characteristics. A good starting point is to use the values recommended in the datasheet, and then adjust them based on simulation results or empirical testing. It's also important to consider the tolerance and temperature coefficient of the components when selecting them.
-
The maximum power dissipation of the LTC1563-3IGN#PBF is 1.4W, and it's dependent on the supply voltage and the output current. To ensure that the device doesn't overheat, it's recommended to provide adequate heat sinking, such as a thermal pad or a heat sink, and to keep the device away from other heat sources. Additionally, it's important to monitor the device temperature and adjust the power supply or output current accordingly.
-
The LTC1563-3IGN#PBF is rated for operation up to 125°C, but the device performance and reliability may degrade at high temperatures. It's recommended to derate the device power dissipation and output current at high temperatures, and to ensure that the device is properly heat-sinked. Additionally, it's important to consider the temperature coefficient of the external components and the overall system reliability.
-
Common issues with the LTC1563-3IGN#PBF can be troubleshooted by checking the power supply voltage and noise, ensuring that the input and output signals are within the recommended ranges, and verifying that the external components are properly selected and connected. Additionally, it's recommended to use a scope or other diagnostic tools to measure the device signals and identify the root cause of the issue.