Part Details for LTC1483IS8#PBF by Linear Technology
Results Overview of LTC1483IS8#PBF by Linear Technology
- Distributor Offerings: (2 listings)
- Number of FFF Equivalents: (9 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (4 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
LTC1483IS8#PBF Information
LTC1483IS8#PBF by Linear Technology is a Line Driver or Receiver.
Line Driver or Receivers are under the broader part category of Drivers And Interfaces.
A driver controls the current or voltage delivered to components like LCDs or motors, while an interface component connects systems for data transfer and control. Read more about Drivers And Interfaces on our Drivers And Interfaces part category page.
Price & Stock for LTC1483IS8#PBF
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Bristol Electronics | 630 |
|
RFQ | ||
|
|
Win Source Electronics | IC TXRX RS485 LOW EMI LOPWR8SOIC | 7000 |
|
$6.0938 / $9.1395 | Buy Now |
Part Details for LTC1483IS8#PBF
LTC1483IS8#PBF CAD Models
LTC1483IS8#PBF Part Data Attributes
|
|
LTC1483IS8#PBF
Linear Technology
Buy Now
Datasheet
|
Compare Parts:
LTC1483IS8#PBF
Linear Technology
LTC1483 - Ultra-Low Power RS485 Low EMI Transceiver with Shutdown; Package: SO; Pins: 8; Temperature Range: -40°C to 85°C
|
| Rohs Code | Yes | |
| Part Life Cycle Code | Transferred | |
| Ihs Manufacturer | LINEAR TECHNOLOGY CORP | |
| Part Package Code | SOIC | |
| Package Description | SO-8 | |
| Pin Count | 8 | |
| Manufacturer Package Code | S8 | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 | |
| Additional Feature | COMMON I/O; TRISTATABLE RECEIVER; 1 RECEIVER ACTIVE UNDER SHUTDOWN | |
| Differential Output | YES | |
| Driver Number of Bits | 1 | |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER | |
| Interface IC Type | LINE TRANSCEIVER | |
| Interface Standard | EIA-422; EIA-485 | |
| JESD-30 Code | R-PDSO-G8 | |
| JESD-609 Code | e3 | |
| Length | 4.9 mm | |
| Moisture Sensitivity Level | 1 | |
| Number of Functions | 1 | |
| Number of Terminals | 8 | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| Out Swing-Min | 1.5 V | |
| Output Characteristics | 3-STATE | |
| Output Low Current-Max | 0.004 A | |
| Output Polarity | COMPLEMENTARY | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | SOP | |
| Package Equivalence Code | SOP8,.25 | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE | |
| Peak Reflow Temperature (Cel) | 260 | |
| Qualification Status | Not Qualified | |
| Receive Delay-Max | 200 ns | |
| Receiver Number of Bits | 1 | |
| Seated Height-Max | 1.75 mm | |
| Supply Current-Max | 0.5 mA | |
| Supply Voltage-Max | 5.25 V | |
| Supply Voltage-Min | 4.75 V | |
| Supply Voltage-Nom | 5 V | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Temperature Grade | INDUSTRIAL | |
| Terminal Finish | Matte Tin (Sn) | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 1.27 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 30 | |
| Transmit Delay-Max | 1200 ns | |
| Width | 3.9 mm |
Alternate Parts for LTC1483IS8#PBF
This table gives cross-reference parts and alternative options found for LTC1483IS8#PBF. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of LTC1483IS8#PBF, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| ADM483JRZ | Analog Devices Inc | $1.1758 | 5 V, Slew-Rate Limited, Low Power, 250 kbps, Half Duplex RS-485/RS-422 Transceiver | LTC1483IS8#PBF vs ADM483JRZ |
| MAX487CSA+ | Analog Devices Inc | $2.6178 | Low-Power, Slew-Rate-Limited RS-485/RS-422 Transceivers, 8-SOIC_N-150_MIL, 8 Pins, 0 to 70C | LTC1483IS8#PBF vs MAX487CSA+ |
| LTC1483IS8#PBF | Analog Devices Inc | $5.2955 | Ultra-Low Power RS485 Low EMI Transceiver with Shutdown | LTC1483IS8#PBF vs LTC1483IS8#PBF |
| SP483ECN | Sipex Corporation | Check for Price | Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDSO8, SOIC-8 | LTC1483IS8#PBF vs SP483ECN |
| ADM483JR-REEL | Analog Devices Inc | Check for Price | LINE TRANSCEIVER, PDSO8, MS-012AA, SOIC-8 | LTC1483IS8#PBF vs ADM483JR-REEL |
| ISL8487EIB-T | Intersil Corporation | Check for Price | LINE TRANSCEIVER, PDSO8, PLASTIC, MS-012AA, SOIC-8 | LTC1483IS8#PBF vs ISL8487EIB-T |
| LTC1483IS8#TRPBF | Analog Devices Inc | Check for Price | Ultra-Low Power RS485 Low EMI Transceiver with Shutdown | LTC1483IS8#PBF vs LTC1483IS8#TRPBF |
| ADM483JR-REEL7 | Analog Devices Inc | Check for Price | 5 V, Slew-Rate Limited, Low Power, 250 kbps, Half Duplex RS-485/RS-422 Transceiver | LTC1483IS8#PBF vs ADM483JR-REEL7 |
| SP483ECN-L/TR | Sipex Corporation | Check for Price | Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDSO8, LEAD FREE, SOIC-8 | LTC1483IS8#PBF vs SP483ECN-L/TR |
LTC1483IS8#PBF Frequently Asked Questions (FAQ)
-
The maximum data rate of the LTC1483IS8 is 100 Mbps, making it suitable for high-speed applications such as video and audio transmission.
-
To ensure signal integrity, it is recommended to use a shielded cable, keep the transmission line impedance matched to the device's output impedance, and use proper termination and filtering techniques.
-
The power consumption of the LTC1483IS8 is typically around 150mW, making it suitable for battery-powered applications. However, this can vary depending on the operating frequency, data rate, and other factors.
-
Yes, the LTC1483IS8 is designed for differential signaling applications and provides a differential output that can be used to drive a differential receiver or other devices.
-
The LTC1483IS8 has several configuration options, including output voltage swing, output common-mode voltage, and input termination. These can be configured using external resistors and capacitors, and the datasheet provides guidance on how to select these components for a specific application.