Part Details for LTC1294CCSW#TRPBF by Analog Devices Inc
Results Overview of LTC1294CCSW#TRPBF by Analog Devices Inc
- Distributor Offerings: (5 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (1 option)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
LTC1294CCSW#TRPBF Information
LTC1294CCSW#TRPBF by Analog Devices Inc is an Analog to Digital Converter.
Analog to Digital Converters are under the broader part category of Converters.
A converter is an electrical circuit that transforms electric energy into a different form that will support a elecrical load needed by a device. Read more about Converters on our Converters part category page.
Price & Stock for LTC1294CCSW#TRPBF
Part # | Distributor | Description | Stock | Price | Buy | |
---|---|---|---|---|---|---|
DISTI #
LTC1294CCSW#TRPBF-ND
|
DigiKey | IC DAS/ADC 12BIT 46.5K 20SOIC Min Qty: 1000 Lead time: 10 Weeks Container: Tape & Reel (TR) | Temporarily Out of Stock |
|
$35.1625 | Buy Now |
DISTI #
584-LTC1294CCSWTRPBF
|
Mouser Electronics | Analog to Digital Converters - ADC 1x Chip 12-B Data Acquisition S RoHS: Compliant | 0 |
|
$35.1600 | Order Now |
|
Analog Devices Inc | 1x Chip 12-B Data Acquisition Min Qty: 1000 Package Multiple: 1000 | 0 |
|
$35.1625 / $35.4400 | Buy Now |
DISTI #
LTC1294CCSWTRPB
|
Richardson RFPD | CONVERTER - ADC RoHS: Compliant Min Qty: 1000 | 0 |
|
$36.3200 / $37.7500 | Buy Now |
|
Vyrian | Peripheral ICs | 957 |
|
RFQ |
Part Details for LTC1294CCSW#TRPBF
LTC1294CCSW#TRPBF CAD Models
LTC1294CCSW#TRPBF Part Data Attributes
|
LTC1294CCSW#TRPBF
Analog Devices Inc
Buy Now
Datasheet
|
Compare Parts:
LTC1294CCSW#TRPBF
Analog Devices Inc
Single Chip 12-Bit Data Acquisition System
|
Pbfree Code | No | |
Rohs Code | Yes | |
Part Life Cycle Code | Active | |
Ihs Manufacturer | ANALOG DEVICES INC | |
Package Description | PLASTIC, SO-20 | |
Pin Count | 20 | |
Manufacturer Package Code | 05-08-1620 (SW20) | |
Reach Compliance Code | compliant | |
Samacsys Manufacturer | Analog Devices | |
Converter Type | ADC, SUCCESSIVE APPROXIMATION | |
JESD-30 Code | R-PDSO-G20 | |
JESD-609 Code | e3 | |
Length | 13.3 mm | |
Linearity Error-Max (EL) | 0.0122% | |
Moisture Sensitivity Level | 1 | |
Negative Supply Voltage-Nom | -5 V | |
Number of Analog In Channels | 8 | |
Number of Bits | 12 | |
Number of Functions | 1 | |
Number of Terminals | 20 | |
Operating Temperature-Max | 70 °C | |
Operating Temperature-Min | ||
Output Bit Code | BINARY | |
Output Format | SERIAL | |
Package Body Material | PLASTIC/EPOXY | |
Package Code | SOP | |
Package Equivalence Code | SOP20,.4 | |
Package Shape | RECTANGULAR | |
Package Style | SMALL OUTLINE | |
Peak Reflow Temperature (Cel) | 260 | |
Qualification Status | Not Qualified | |
Sample Rate | 0.0465 MHz | |
Sample and Hold / Track and Hold | SAMPLE | |
Seated Height-Max | 2.95 mm | |
Supply Voltage-Nom | 5 V | |
Surface Mount | YES | |
Technology | CMOS | |
Temperature Grade | COMMERCIAL | |
Terminal Finish | Matte Tin (Sn) | |
Terminal Form | GULL WING | |
Terminal Pitch | 1.27 mm | |
Terminal Position | DUAL | |
Time@Peak Reflow Temperature-Max (s) | 30 | |
Width | 7.493 mm |
Alternate Parts for LTC1294CCSW#TRPBF
This table gives cross-reference parts and alternative options found for LTC1294CCSW#TRPBF. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of LTC1294CCSW#TRPBF, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
Part Number | Manufacturer | Composite Price | Description | Compare |
---|---|---|---|---|
LTC1294CCSW#TRPBF | Linear Technology | Check for Price | LTC1294 - Single Chip 12-Bit Data Acquisition System; Package: SO; Pins: 20; Temperature Range: 0°C to 70°C | LTC1294CCSW#TRPBF vs LTC1294CCSW#TRPBF |
LTC1294CCSW#TRPBF Frequently Asked Questions (FAQ)
-
The recommended layout and placement for the LTC1294CCSW involves keeping the analog and digital grounds separate, using a solid ground plane, and placing the device close to the analog signal sources. Additionally, it's recommended to use a low-ESR capacitor for the VCC bypass and to keep the analog input traces short and away from digital traces.
-
To ensure accurate temperature measurement with the LTC1294CCSW, it's essential to use a thermocouple with a high-quality junction, ensure good thermal contact between the thermocouple and the device being measured, and use a cold junction compensation (CJC) sensor. Additionally, the device should be calibrated using a known temperature reference point.
-
The maximum cable length for the thermocouple connections to the LTC1294CCSW depends on the type of thermocouple and the noise environment. As a general rule, it's recommended to keep the cable length as short as possible (less than 10 feet) to minimize noise pickup and ensure accurate measurements.
-
No, the LTC1294CCSW is specifically designed to work with thermocouples and is not compatible with thermistors or RTDs. If you need to measure temperature using a thermistor or RTD, you would need to use a different device, such as the LTC2983 or LTC2990.
-
The LTC1294CCSW can be programmed for a specific thermocouple type using the device's internal registers. The programming can be done using an SPI interface and requires a detailed understanding of the device's register map and programming protocol. It's recommended to refer to the device's datasheet and application notes for more information.