Part Details for LTC1050CS8 by Linear Technology
Results Overview of LTC1050CS8 by Linear Technology
- Distributor Offerings: (3 listings)
- Number of FFF Equivalents: (4 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
LTC1050CS8 Information
LTC1050CS8 by Linear Technology is an Operational Amplifier.
Operational Amplifiers are under the broader part category of Amplifier Circuits.
Amplifier circuits use external power to increase the amplitude of an input signal. They can be used to perform linear amplifications or logarithmic functions. Read more about Amplifier Circuits on our Amplifier Circuits part category page.
Price & Stock for LTC1050CS8
Part # | Distributor | Description | Stock | Price | Buy | |
---|---|---|---|---|---|---|
|
ComSIT USA | Operational Amplifier, 1 Func, 5uV Offset-Max, CMOS, PDSO8 ECCN: EAR99 RoHS: Not Compliant |
|
|
RFQ | |
|
Vyrian | Amplifiers | 432 |
|
RFQ | |
|
Win Source Electronics | Precision Chopper Stabilized Operational Amplifier with Internal Capacitors | IC OPAMP CHOPPER 1 CIRCUIT 8SO | 6600 |
|
$4.6993 / $6.0699 | Buy Now |
Part Details for LTC1050CS8
LTC1050CS8 CAD Models
LTC1050CS8 Part Data Attributes
|
LTC1050CS8
Linear Technology
Buy Now
Datasheet
|
Compare Parts:
LTC1050CS8
Linear Technology
LTC1050 - Precision Zero-Drift Operational Amplifier with Internal Capacitors; Package: SO; Pins: 8; Temperature Range: 0°C to 70°C
|
Rohs Code | No | |
Part Life Cycle Code | Transferred | |
Ihs Manufacturer | LINEAR TECHNOLOGY CORP | |
Part Package Code | SOIC | |
Package Description | PLASTIC, SOIC-8 | |
Pin Count | 8 | |
Manufacturer Package Code | S8 | |
Reach Compliance Code | not_compliant | |
ECCN Code | EAR99 | |
HTS Code | 8542.33.00.01 | |
Amplifier Type | OPERATIONAL AMPLIFIER | |
Architecture | CHOPPER-STAB | |
Average Bias Current-Max (IIB) | 0.00015 µA | |
Bias Current-Max (IIB) @25C | 0.000075 µA | |
Common-mode Reject Ratio-Nom | 130 dB | |
Frequency Compensation | YES | |
Input Offset Voltage-Max | 5 µV | |
JESD-30 Code | R-PDSO-G8 | |
JESD-609 Code | e0 | |
Length | 4.9 mm | |
Low-Bias | YES | |
Low-Offset | YES | |
Moisture Sensitivity Level | 1 | |
Neg Supply Voltage Limit-Max | -9 V | |
Neg Supply Voltage-Nom (Vsup) | -5 V | |
Number of Functions | 1 | |
Number of Terminals | 8 | |
Operating Temperature-Max | 85 °C | |
Operating Temperature-Min | -40 °C | |
Package Body Material | PLASTIC/EPOXY | |
Package Code | SOP | |
Package Equivalence Code | SOP8,.25 | |
Package Shape | RECTANGULAR | |
Package Style | SMALL OUTLINE | |
Peak Reflow Temperature (Cel) | 235 | |
Qualification Status | Not Qualified | |
Seated Height-Max | 1.75 mm | |
Slew Rate-Nom | 4 V/us | |
Supply Current-Max | 2.3 mA | |
Supply Voltage Limit-Max | 9 V | |
Supply Voltage-Nom (Vsup) | 5 V | |
Surface Mount | YES | |
Technology | CMOS | |
Temperature Grade | INDUSTRIAL | |
Terminal Finish | Tin/Lead (Sn/Pb) | |
Terminal Form | GULL WING | |
Terminal Pitch | 1.27 mm | |
Terminal Position | DUAL | |
Time@Peak Reflow Temperature-Max (s) | 20 | |
Unity Gain BW-Nom | 2500 | |
Voltage Gain-Min | 1000000 | |
Width | 3.9 mm |
Alternate Parts for LTC1050CS8
This table gives cross-reference parts and alternative options found for LTC1050CS8. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of LTC1050CS8, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
Part Number | Manufacturer | Composite Price | Description | Compare |
---|---|---|---|---|
LTC1050CS8#PBF | Analog Devices Inc | $5.5487 | Precision Zero-Drift Operational Amplifier with Internal Capacitors | LTC1050CS8 vs LTC1050CS8#PBF |
LTC1050CS8#TRPBF | Analog Devices Inc | $5.7405 | Precision Zero-Drift Operational Amplifier with Internal Capacitors | LTC1050CS8 vs LTC1050CS8#TRPBF |
LTC1050CS8 | Analog Devices Inc | Check for Price | Operational Amplifier, 1 Func, 5uV Offset-Max, CMOS, PDSO8 | LTC1050CS8 vs LTC1050CS8 |
LTC1050CS8#TRPBF | Linear Technology | Check for Price | LTC1050 - Precision Zero-Drift Operational Amplifier with Internal Capacitors; Package: SO; Pins: 8; Temperature Range: 0°C to 70°C | LTC1050CS8 vs LTC1050CS8#TRPBF |
LTC1050CS8 Frequently Asked Questions (FAQ)
-
The maximum input voltage that can be applied to the LTC1050CS8 is 36V, although the recommended operating range is 4.5V to 36V. Exceeding this voltage can cause damage to the device.
-
To ensure accurate voltage regulation, it's essential to follow proper PCB layout and design guidelines, including using a low-ESR output capacitor, minimizing trace resistance, and keeping the input and output capacitors close to the device.
-
The noise reduction capacitor (CNR) is used to filter out high-frequency noise and oscillations in the output voltage. It's recommended to use a 10nF to 100nF capacitor for this purpose, depending on the specific application requirements.
-
The LTC1050CS8 is rated for operation up to 125°C, but it's essential to consider the device's power dissipation and thermal resistance when operating in high-temperature environments. Proper heat sinking and thermal management are crucial to ensure reliable operation.
-
The output voltage of the LTC1050CS8 can be calculated using the formula: VOUT = VREF x (1 + R1/R2), where VREF is the internal reference voltage (2.5V), and R1 and R2 are the resistors used to set the output voltage.